|
| 1 | Supply of Materials as per Scope of Works, Technical Specifications and Approved Drawing |
| 2 | Manufacture and supply of Steel Tubular Pole |
| 3 | 7.5 M Long 410 SP-9 |
| 4 | Cross Arms (Mlld Steel) |
| 5 | LT, 4 Wire cross arm made of Channel of size 75 x 40 x 5 mm complete etc. as required. |
| 6 | GI Stay Set |
| 7 | Galvanized stay set complete with galvanised MS anchor plate of size 230 x 230 x 5 mm, anchor rod of length 1800 mm & diameter 18 mm alongwith stay wire, thimble, bow, guy strain insulator, nuts & bolts etc. as required (of all sizes) |
| 8 | Manufacture and supply of Insulator and hardware as per technical specification, approved drawings and scope of work. |
| 9 | Shackle (Polymer) insulator LT with pin |
| 10 | Pin lnsulator LT with Pin. |
| 11 | Earthing System |
| 12 | Earthing with 40 mm diameter Gl pipe 4.5 m long with Gl wire for pole earthing including salt charcoal etc. as required. |
| 13 | Manufacture and supply of ACSR Conductors of following sizes with Jointing sleeves, binding materials, PG clamps, bi-metallic clamp, hardware etc for overhead line and jumpers as required as per technical specification, approved drawings and scope of work |
| 14 | SQUIREL Conductor ACSR. (6/1/2.11 sqmm) |
| 15 | Manufacturing, fabrication and supply of danger plate made of mild steel sheet of atleast 1.6 mm thick and vitreous enameled white, with letters, figures and the conventional skull and cross-bones in signal red colour on the front side for - |
| 16 | Danger Plate of size 250 mm x 200 mm of thickness 3 mm |
| 17 | Anti climbing devices with G. l. thornwire / Barbed wires. |
| 18 | Paintings & Finishing Works |
| 19 | Supply and Painting with 2 coats of red oxide paint & 2 coats of paints on poles / equipment / metal surfaces on full rate basis. |
| 20 | Designing, Manufacturing & Supplying of Lightning Arrestor of different ratings as per Specification. |
| 21 | LT 3 Phase lines and systems. |
| 22 | Designing, Manufacturing & Supplying of 1.1 KV grade steel armoured Power Cable (ALUMINIUM CONDUCTORS) of following capacities. |
| 23 | 4 sqmm WPTC wire |
| 24 | Miniature Circuit Breaker (MCB) as per ISS |
| 25 | 16 Amp. MCB SPN. |
| 26 | Erection of Materials as per Scope of Works, Technical Specifications and Approved Drawing |
| 27 | Excavation of pole pit (of depth 1/6th of pole length) in all kind of soil/rock & Erection of following types of poles for HT/LT overhead line by providing and installing danger plate, anti-climbing devices (barbed wire), earthing material (coil and 8SWG GI wire), pole numbering including cement concrete foundation or refilling by boulders using cement concreting foundation 1 part cement, 3 part sand, 6 part 40 mm size stone aggregate chips (1:3:6) or/and 200 mm average size boulders mixed with excavated earth , Top muffing etc as per scope of work, approved drawings and specifications: |
| 28 | 7.5 M Long 410 SP-9 |
| 29 | GI Stay Set |
| 30 | Galvanized stay set complete with galvanised MS anchor plate of size 230 x 230 x 5 mm, anchor rod of length 1800 mm & diameter 18 mm alongwith stay wire, thimble, bow, guy strain insulator, nuts & bolts etc. as required (of all sizes) |
| 31 | Earthing System |
| 32 | Erection of Earthing with 40 mm diameter Gl pipe 4.5 m long with Gl wire for pole earthing including salt charcoal etc. as required. |
| 33 | Stringing of ACSR Conductor as per approved sagging including installation of insulators, hardware fittings, conductors accessories, jumpering arrangement, stringing of guard wire. This shall aslo include erection of PG clamp and connectors, jointing sleeves, danger plate & anticlimbing device etc. as required complete in all respect as per TS. |
| 34 | SQUIREL Conductor ACSR. (6/1/2.11 sqmm) |
| 35 | Cross Arms (Mlld Steel) |
| 36 | Erection of LT, 4 Wire cross arm made of Channel of size 75 x 40 x 5 mm complete etc. as required. |
| 37 | Designing, Manufacturing & Supplying of Lightning Arrestor of different ratings as per Specification. |
| 38 | Erection of LT 3 Phase lines and systems. |
