|
| 1 | Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, includinggetting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level. In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m |
| 2 | Providing and laying in position cement concreteof specified grade excluding the cost of centringand shuttering - Allwork upto plinth level : 1:4:8(1 Cement : 4 fine/ coarse sand : 8 graded stoneaggregate 40 mm nominal size). |
| 3 | Random rubble masonry with hard stone infoundation and plinth :Cement mortar 1:6 (1cement : 6 coarse sand) |
| 4 | Brick work with FPS bricks of class designation 75in superstructure above plinth level upto twostories in all shapes and sizes in : Cement mortar1:6 (1 cement : 6 coarse sand) |
| 5 | Providing and laying in position cement concreteof specified grade excluding the cost of centringand shuttering - All work upto plinth level :1:1½:3 (1 Cement : 1½ coarse sand : 3 gradedstone aggregate 20 mm nominal size). |
| 6 | Cement plastering including T&P, scaffolding, materialand complete labour, including cost of water, curing,racking of joints etc. with 12 mm cement plaster of mix: including Providing /mixing of synthetic fiberscompulsorily complying with IS 16481:2022 of 06mm/12 mm length to be mixed @ 0.25% by weight ofCement i.e. 125 gms per 50 kg Cement up to 900 gmsper cum of Concrete/ mortar plaster of mix : 1:4 (1cement : 4 fine/ coarse sand) |
| 7 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a primingcoat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.Brick work with bricks of class designation 75 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 8 | Stone work (machine cut edges) for wall lining etc. (veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of cramps which shall be paid for separately) : Red sand stone - exposed facefine dressed with rough backing.60 mm thick. |
| 9 | Providing, laying, spreading and compacting of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per MoRT&H specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion.Grading - III Material |
| 10 | Construction of embankment with approved material obtained from borrow pit with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of table 300-2 including cost of compensation for earth taken from private land complete as per MoRT&H specification clause 305. (Lead taken upto 5 km) |
| 11 | Providing and Laying Reinforced cement concrete pipe NP4/ prestressed concrete pipe for culverts including jointing ends and fixing collar with cement mortar 1:2 complete as per clause 1000 & 2900 of MoRT&H specification including all material, labour form work, machinery.600 mm internal diameter |
| 12 | Providing and fixing of reinforced Ferro-Cement drain covers designed for \"A\" class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted M.S. plate , Rim and M.S. lifting hooks, Admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc. Standard Size 1000x800mm (100mm thick) for span 451 to 700mm |
| 13 | Standard Size 2100x500mm (150mm thick) for span 1201 to 1500mm |
| 14 | 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar1:5 (1 cement: 5 coarse sand) including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. Red sand stone |
| 15 | Reinforcement for R.C.C.work at all levels including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. |
| 16 | Centring and shuttering upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete. |
| 17 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level : 1:2:4 (1 cement : 1 coarse sand: 2 graded stone aggregate 20 mm nominal size). (As per design mix) |
