|
| 1 | Supply & fixing steel tubular pole 9.50 Metre long designated 410 SP-39 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect |
| 2 | Supply & fixing of 100 mm × 110 mm shackle insulator/100 mm × 80 mm pin insulator including G.I. Bolts / spindle nuts etc. complete in all respects. |
| 3 | Supply and fixing of 230 mm × 32 mm × 1.5 mm galvanised steel strips including holes for shackle insulators pins and bolts etc. complete in all respect. |
| 4 | Supply & erection of \"D\" clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint . |
| 5 | Supply & erection of overhead line with ACSR conductor on poles / service bracket including binding etc. complete in all respects. |
| 6 | Supply and erection of stay set at 3.5 Metres away from the pole complete with galvanised 19 mm dia × 1.80 Metre long stay rod, 30 cm × 30 × 6.3 mm anchor plat, thimble stay clamps, stay insulator, 19 mm 600 mm double screw tightener, 7/3.5 mm G.I. stay wire etc. in 1:3:6 cement concrete in all respects. |
| 7 | Painting of the electric pole with 2 coats of aluminum paint over red oxide primer complete in all respects. |
| 8 | Supply and burying of 40 mm dia. x4.5 metres long G.I. pipe vertically for earthing having 12 mm dia. holes spaced 75 mm apart drilled up to 2 metres from the bottom complete with earthing lead of no. 6 to 8 SWG GI wire in G.I. pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board ,30 cm square C.I. box with hinged cover masonary enclousure funnel at top ,alternate layers of charcoal/ coke and salt at least 150 mm thick alround etc. as per directions of engineer-in-charge complete in all respects as per drawing. |
| 9 | Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site |
| 10 | Supply and laying of aluminium conductor PVC insulated armoured served, sheathed cable 1100 volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick stand alround and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Inchange, complete in all respect. The armoring of the cable shall be properly connected with the earthy conductor by clamps etc. 10 sq. mm. 2 core cable. |
| 11 | Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser/Reflector with driver set suitable for 110 to 130 watt confirming to IP66 Protection Having company LOGO Engraved complete in all respect.Cat AA |
| 12 | S&F of 200 Amp. four pole change over switch on 50mm x 50mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge. |
| 13 | S&F of 100 A. 415 V Heavy Duty Double Break HRC fuse type metal clad TPN complete with HRC fuse etc. on angle iron frame complete in all respect. |
| 14 | Numbering of Pole 10 cm height letter with Approved brand Paint complete in all Respect. |
| 15 | Supplyof 150 Liter capacity Usha Drinking Water Coolar make with Refrigarator Modal No.(SRA 150150G,SS304) BIS No.9159385 havying cooling capacity 150 Liter with extra large stainless steel body with water tap 2 Nos complete in all respects. |
| 16 | Supply of 4 KVA copper wound Stabilizer range 140-280 with plug top complete in all respects. |
| 17 | Installation and Comissioning charges of Water Coolar incl. connection complete in all respects. |
| 18 | Construction of 2.00m x 1.50 m x 2.80 m Water Coolar Cage made out of 50x50x5mm M.S. angle iron with 10 SWG welded wire mesh of size 1”x2”galvanized G I Sheet of 24 SWG on roof, top and side to protect the coolar from rain. The foundation of cage shall be of 0.15m in 1:2:4 cement concretebase and brick work in1:6 cement and fine sand. The flooring of the cage should be 6” base concrete in the ratio of 1:6:12 and 4.00mm thick and plaster in 1:2:4 plain including painting with aluminium paints. The job includes supply of all materials, Labour T&P required for proper completion of work. (As per civil schedule Analysis) |
| 19 | S/F of Chlorinated Polyvinyl Chloride CPVC Pipes of 15mm dia cpvc Pipe for Water Coolar Fittings,clamps including all materials, Labour etc complete in all respects. |
| 20 | S/F of Chlorinated Polyvinyl Chloride CPVC Pipes wash out pipe of 40mm dia cpvc Pipe for wastage water drain from Water Coolar connection complete in all respects. |
| 21 | S/F of brass stop cock of approved make complete in all respects. |
| 22 | S/F of brass bib cock of approved make complete in all respects. |
| 23 | S/F of uplasticised PVC connection pipe with brass unions 30cm length 15mm dia PipeFittings including all materials, Labour etc complete in all respects. |
| 24 | S/fixing of power plug with 15A/250 V flush typemodular switchand 5 pin 15A/250 V flush type universal socket on concealed M.S. box including supply of all materials labour T&C etc. required for proper complete in all respects |
| 25 | S/F of 6 Amp to 32 Amp SPMCB (10 KA) C Curve Cat A |
| 26 | S/F of 6 Amp to 32 Amp. DPMCB (10 KA) C curve Cat A |
| 27 | S/F surface/flush mounting 4 way SPN distribution board with additional metal door without MCB complete in all respect and as directed at site. Cat B |
| 28 | S/L of aluminim conductor PVC insulated armored, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by Engineer-In-Charge, complete in all respects The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (i) 6sqmm 2 core |
| 29 | Supply and Hosting of syntax or equivalent Make High Density Polyethylene sheenless moulded Tank and placing in position. The Job is inclusive of all taxes,Labour T&P and other material for proper completion of work as directed by Engineer in charge at site. |
| 30 | Drilling of 150 mm dia T/W bore suitable for 110mm dia pipe/200mm dia T/W bore suitable for 140 mm dia pipe all complete with labour T/P as per direction of engineer incharge |
| 31 | Supply and lowering of 140mm dia 10kg/cm2 with plastic net cover slots of pvc pipe by UPIN(phenolex or apb by E/I) all complete |
| 32 | Supply and pouring of pee gravels suitable for T/W bore all complete as per direction of engineer incharge |
| 33 | S/F of 110mm PVC pipe adopter suitable for item no. 2 |
| 34 | Supply of 1HP submersible pump set with starter UPIN 65m head ( Pluga/Crompton Greeves/KSB) |
| 35 | Supply and fitting of 4sqmm 3 core copper wired cable (ISI mark) complete in all respect |
| 36 | Supply and lowering of 40 mm dia ribbed screen Ashirvad PVC pipe (ISI marked)/ 32 mm dia G.I. Pipe by UPIN and fixed with boat site threaded SS nipple all complete. |
| 37 | Transportation of all material T&P etc to the site of work, loading, unloading and proper stacking at the site including return cartage of unused material with the diging the pit of boring work including supply all labour T&P with with arrangement of water required etc all complete. |
| 38 | Installation of 1.00HP submersible motor pump with 32mm G.I. Lowering, submersible cable 4sqmm & installation of starter including supply of labpur, T&P etc complete in all respect |
| 39 | devlopment of bore hole till the discharges of water become free from sand and turbidity by compression and disinfection of bore including supply of all labour T&P |
| 40 | Chemical & bacteriological testing of water sample |
| 41 | S/F of 32mm dia G. I. Pipe complete with G. I. Fittings,clamps including all materials, Labour etc complete in all respects. |
| 42 | S/F of CP brass stop cock 15mm of approved make complete in all respects. |
| 43 | S/F of CP brass bib cock 15mm of approved make complete in all respects. |
| 44 | S/F of gun metal non return valve 32mm of approved make complete in all respects. |
| 45 | S/F of 32 Amp 415 Volt TPN Metal Clad Rewirable type switch fuse unit on angle iron bracketcomplete in all respects. |
