Name of Work: REPAIRING OF HT/LT NETWORK AT I/C KHONMUH
Sl. No.
Item Description
1
Note: Contractor should Quote Rates with all taxes.
2
SITC of HT steel tubular poles swaged type pole fitted with base plate. Pole designation 410- SP 339 Mtr. Height cap on top with base coat painting of red oxide and two coats of silver white paint. The execution of pole pit up to 5Ft. deep & refilling the same after erection of pole. Cement bottoming of steel tubular poles, 2’x2’x6’ in the ratio of 1:3:6 mix. (1cement: 3 coarse sand: 6 graded aggregate stone 40mm nominal size). The foundation block shall be laid 5’ below ground level and 1’ above ground level with surface with 1mm thick cement plaster in 1:4 mix. (1 cement : 4 coarse sand) NOTE: The necessary formalities with PDD including shutdown shall have to be adopted by the contracting agency as per the norms and guidelines of JKPDD.
3
P/F of 11 Kv polymer type Pin insulators with pins, nuts washers etc. ( complete Job) ( 10 KN)
4
P/F of channel iron 100mm x 50mm x 6mm (16 kg) 5 ft long cross arm including, bolts, nuts and washer and necessary clamps for insulator pins having base coat of red oxide and two coats of silver white paint as required.
5
Providing of 11Kva HT Gloves set
6
Providing of Acrylic Link Rod
7
Providing and fixing MS flat iron braces 1 Mtr. long 50x 6mm having base coat of red oxide and two coast of silver white paint with holes drilled as required
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
