Tender For High Mast Light (01 No.) At Melamath Chowk Near Golghar Ward No.03 In Islampur Municipality
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Apr 2025
0 days left
EMD
9982
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
islampur → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For High Mast Light (01 No.) At Melamath Chowk Near Golghar Ward No.03 In Islampur Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. |
| 2 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (b) Depth of excavation for additional depth beyond 1,500 mm. and upto 3,000 mm. but not requiring shoring. |
| 3 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 4 | (I) Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor (A) [Pakur Variety](a) 1:3:6 proportion |
| 5 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(i) Pakur Variety |
| 6 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor/upto 4 m (i) Tor steel/Mild SteelI. SAIL/TATA /RINL |
| 7 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(a) 25 mm to 30 mm thick wooden shuttering asper decision & direction of Engineer-In-Charge. |
| 8 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(f) 25 mm to 30 mm shuttering without staging in foundation |
| 9 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar(c) 10 mm thick plaster |
| 10 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation. |
| 11 | Supplying and fixing LED light 200 watt for High Mast Light (Make Philips BVP 177 LED 200/ Crompton LFLN-200-CDL/60-M/Bajaj PRAZE F240L WH NB-A5 TG SD/ Havells JETA IRISMAXFL 200 W LED 757 PWBLTG) with necessary connection Lumen output ≥ 110 LPW Model Protection IP 66 // Must submitt the Warrenty card for 3 years |
| 12 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:TATA-Medium GI pipe |
| 13 | Supply4 core 25 sqmm PVC aluminium amoured cable for the connection from FP Bbox to WBSEDCL Source |
| 14 | Supply and fixing twine Dome aviation obstruction light GLS type.) |
| 15 | Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials asrequired 40 mm dia |
| 16 | SupplyDelver & installation of 16.00 Mtr. High Mast Tower Polygonal Shape Shaft suitable for 08 luminaires symmetric suitable wind speed upto 180 KM/hr.Material Cons : BSEN 10025, High Mast accessories, Mechanical Components including Head Frame & Pulley Assay, winch Bracket, Lantern Carriage Ring, Guide Ring, Compensating Disc, Lightening Arrestor etc. , Wire Rope, Safety Wire Rope, D Suckle Clamps, Nuts and Bolts, Foundation Accessories. Winch Assembly, Cable, Power Tools (Motor), Luminaries and Feeder Panel Box to be provided Make- BP Project/Bajaj/Utkarsha |
| 17 | Supplying and fixing 2 mm polyvinyleGlow sign board made of 22 SWG GI sheet box with 1\"x1\" aluminium channel for fixing the vinyl board after necessary cutting the letter as required & S/f LED tube light fitting along with all accessories. |
| 18 | Supplying and fixing outdoor type feeder pillar box including MCB, tiner and necessary connection feet, it will be fixed on 1 Mtr. Above from GL (make L&T/ Standard). |
| 19 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed |
| 20 | Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. (make L&T/ Standard). |
AI Tender Summary
Tender Timeline
Apr 05, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedApr 16, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 21, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender