|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge,All kinds of soil. |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:. Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 6 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand) |
| 7 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joint (Payment for grouting of joints to be made separately).Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints. (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm |
| 8 | Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: |
| 9 | Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, interconnections, powder painted includingearthing etc. as required. (But without MCB/RCCB/Isolator) 12 way , Double door |
| 10 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\"curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete withconnections, testing and commissioning etc. as required.Single pole |
| 11 | Supplying and fixing DP sheet steel enclosure on surface/ recessalong with 25/32 A 240 V \"C\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 12 | Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections butexcluding modular plate etc. as required..5/6 A switch. |
| 13 | Supplying and fixing following modular switch/ socket on theexisting modular plate & switch box including connections butexcluding modular plate etc. as required.. 3 pin 5/6 A socket outlet |
| 14 | Supplying and fixing suitable size GI box with modular plate andcover in front on surface or in recess, including providing andfixing 3 pin 5/6 A modular socket outlet and 5/6 A modularswitch, connections etc. as required. |
| 15 | Supplying & fixing suitable size GI box wih modular plate andcover in front on surface or in recess including providing andfixing 25 A modular socket outlet and 25 A modular SP MCB, \"C\"curve including connections, painting etc. as required. |
| 16 | Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed medium class PVC conduit asrequired. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 17 | Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed medium class PVC conduit asrequired. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 18 | Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed medium class PVC conduit asrequired. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 19 | Supplying , Installation ,Testing & Commisionning of Lynx Spyke Light of 10 Wattage & CCT of 3000K (CAT Ref. No-SLMLY010W) |
| 20 | Supplying , Installation ,Testing & Commisionning of Zenith Plus Flood Light of 50 Wattage & CCT of 5700 (CAT Ref. No-FWZP050C) |
| 21 | Fountain Pad, make in FRB A Class Complete Holder assembly with Water Fountain, 4 Layer Resin Coating with wax filler & Water Proofing Coated FRB |
| 22 | 6’ FEET DIA Ring make in Jindal B Class grade Complete 2 PCS Holder assembly with Rubber coated paint. (CNC Cutting) |
| 23 | Crown Jet Nozzle for Ring With Ball Joint Make in Brass with shine chrome (CNC Cutting) |
| 24 | Centre Jet Nozzle With Ball Joint Make in Brass with shine chrome (CNC Cutting) |
| 25 | Color Changing LED Light 27 W (Powered By Edison) Rating:- IP68/CE/ROHS/CE, Model No :- BKWT-SS/9L/TRI |
| 26 | DCC Programmable Controller for Lights, Model- BKWT/PWN/DC,Rating:- IP-65/CE/ROHS |
| 27 | Open well submersible pump with dust grill 2HP, Make:- Compton/Kirloskar |
| 28 | Electrical panel, Starter overload relay with face and on/off indication, protection circuit. Assembled with L&T or TC. As Suitable for Pump Operational Systems as water,Rating – IP65/65 (With Smart Shock Protection Circuit) |
| 29 | Supplying and Fixing of PVC pipes (10 Kg/cm2) of make Prince/Supreme/Prakash or equivalent |
| 30 | Supplying and Laying submersible flat/round cables PVC insulated PVC 4core /3core/2core Wiring wire used multiband good PVC insulation Thickens of wire 1.5mm,2.5mm Jointing of wire PVC. Waterproof coating tape or chemical. Note:- All wires are in 100% copper. |
| 31 | Transportation |
| 32 | Design/ Supervision/ Installation/Commissioning/Labour/execution |
