Bids Are Invited For 1 Scale - Steel (1 Mtrs) 2 Scale - Steel (2 Mtrs) 3 2.5 Mm Collet For 9/32 Inches - 40 Thread 4 3.3 Mm Collet For 9/32 Inches - 40 Thread 5 4.0 Mm Collet For 9/32 Inches - 40 Thread 6 4.1 Mm Collet For 9/32 Inches - 40 Thr, Tumkur-Karnataka

Bids Are Invited For 1 SCALE - STEEL (1 Mtrs) 2 SCALE - STEEL (2 Mtrs) 3 2.5 MM COLLET FOR 9/32 inches - 40 THREAD 4 3.3 MM COLLET FOR 9/32 inches - 40 THREAD 5 4.0 MM COLLET FOR 9/32 inches - 40 THREAD 6 4.1 MM COLLET FOR 9/32 inches - 40 THREAD 7 4.5 MM COLLET FOR 9/32 inches - 40 THREAD 8 4.8 MM COLLET FOR 9/32 inches - 40 THREAD 9 4.9 MM COLLET FOR 9/32 inches - 40 THREAD 10 5.0 MM COLLET FOR 9/32 inches - 40 THREAD 11 AUTOMATIC CENTER PUNCH 12 Double ended open ring spanner Set 13 RING SPANNER SET - 6 TO 32 14 DRILL CHUCK 1/2 inches 15 FACOM MAKE AIRCRAFT SHEAR 16 HOT AIR GUN 17 REAMER TAPER PIN HSS DIA 3 TO 3.5 18 RIVET DRIVERS 10 DEGREE OFFSET 19 RIVET DRIVERS 10 Degree OFFSET 20 RIVET DRIVERS 10 Degree OFFSET 21 RIVET DRIVERS 10 DegreeOFFSET 22 RIVET DRIVERS UNIVERSAL ST SERIES 23 RIVET DRIVERS UNIVERSAL ST SERIES 24 RIVET DRIVER-4.0 MEDIUM ST. DRIVE 25 UNIVERSAL JOINT SOCKET 7 MM 26 90 D DRILL GUN CHUCK TYPE 3/8 inches 27 3.8 mm COLLET FOR 9/32 inches - 40 THREAD 28 6.0 mm COLLET FOR 9/32 inches -40 THREAD 29 12 CUT, DOUBLE END FLARE NUT, DIA 1 30 12 CUT, DOUBLE END FLARE NUT DIA 31 12 CUT, DOUBLE END FLARE NUT DIA 32 12 CUT, DOUBLE END RING SPANNER DIA 33 12 CUT, DOUBLE END FLARE NUT DIA 1 34 12 CUT, DOUBLE END FLARE NUT DIA 2 35 DIGITAL CLINO METERS 36 DOUBLE END RING RACHET - 4 - 5 mm 37 DOUBLE END RING RACHET - 6 - 7 mm 38 DOUBLE END RING RACHET - 8 - 9 mm 39 DOUBLE END RING RACHET - 10 - 11 mm 40 DOUBLE END RING RACHET - 14 -15 mm 41 DOUBLE END RING RACHET - 16 -17mm 42 DOUBLE END RING RACHET - 18 -19 mm 43 DOUBLE END RING RACHET - 20 -21 mm 44 DOUBLE END RING RACHET - 22 -24 mm 45 HAND SHEARS - RIGHT HAND REF FACOM 46 HAND SHEARS - STRAIGHT REF FACOM 47 TAPER REAMERS - 6-8 mm 48 TAPER REAMERS - 8-10 mm 49 SEALANT GUN - BATTERY POWERED WITH 50 St RIVET SETS FOR AN470 Straight Ri 51 10 degree OFF SET RIVET SET FOR AN4 52 Bobble leveler Round - dia 30 mm fo 53 Back countersunk 3.2 mm dia by 100 D 54 Combination wrench FACOM 467BF.8 & 55 FACOM 467BF.13 56 ARCGUTECTS PLUMB BOB FACOM 57 3.9 mm COLLET FOR 9by3 inches-40 THREAD 58 Tap Hand RH HSS M4 by 0.7 59 Tap Hand RH HSS M5 by 0.8 6H PM 60 Tap Hand RH HSS M6 by 1 6h PM 61 DRILL GUN PNUMATIC 90DEG 62 PISTOL DRILL GUN CHUCK SIZE-1/4 inches Total Quantity : 321

Refer document

Refer document

Refer document