Tender For Construction Of 3.00 Mtr Dia Rcc Ring Well I/C Recharge Through Rain Water For Power House At Hanspuri Under Sub Division No.Ii, Nacd, Apwd, Mayabunder
Tender Value
9.21 Lakhs
Estimated cost
Bid Submission
15 Apr 2025
0 days left
EMD
18434
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mayabunder → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 3.00 Mtr Dia Rcc Ring Well I/C Recharge Through Rain Water For Power House At Hanspuri Under Sub Division No.Ii, Nacd, Apwd, Mayabunder
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: |
| 2 | All kinds of soil |
| 3 | Earthworkinexcavationbymechanicalmeans(Hydraulicexcavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. |
| 4 | All kinds of soil |
| 5 | Earth work in excavation by mechanicalmeans (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 6 | All kinds of soil. |
| 7 | Providingandlayinginpositioncementconcreteof specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 8 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 10 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 11 | Reinforced cement concrete work in well-steining, excluding the cost of centering, shuttering,finishing andreinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources ; 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 13 | Foundations, footings, bases of columns, etc. for mass concrete. |
| 14 | Well steining |
| 15 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 16 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 17 | Steel work in built up tubular (round, square or rectangular hollow tubesetc.)trussesetc.,includingcutting,hoisting,fixingin position and applying a priming coat of approved steel primer, including welding andbolted withspecial shaped washers etc. complete. |
| 18 | Electric resistance or induction butt welded tubes |
| 19 | Providing and fixing pre-painted galvalume (PPGL) steel profile sheets AZ-150 of brand Tata Bluescope steel, Everest Industries Ltd., JSW Steel Ltd., Jindal India Ltd. or equalavent(size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with aluminium zinc coating 150 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling / self tapping aluminium screws (Xylan) of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 20 | Providing and fixing pre-painted galvalume (PPGL) steel profile sheets accessories 0.50 mm (+0.05 %) total coated thickness, with aluminium Zinc coating 150 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : of brand Tata Bluescope steel, Everest Industries Ltd., JSW Steel Ltd., Jindal India Ltd. |
| 21 | Ridges plain (500 - 600mm) |
| 22 | Supplying of laying of stone aggergate of various size around the Ring well below the G.L. to act as filter media. |
| 23 | 20mm to 63mm size stone aggregate |
| 24 | Carriage of materials by mechanical transport from Port Blair to Panighat Jetty. |
| 25 | Carriage of Cement |
| 26 | Carriage of Steel |
| 27 | Carriage of materials by mechanical transport from Panchawati quarry to Panighat Jetty. |
| 28 | Carriage of Sand |
| 29 | Carriage of stone aggergate below 20mm nominal size |
| 30 | Carriage of materials by Motor Dunghi Panighat Jetty to Hanspuri. |
| 31 | Cement |
| 32 | Steel |
| 33 | Sand |
| 34 | Carriage of stone aggergate below 20mm nominal size |
| 35 | Carraige of material by head load from Sea Shore to work site at Hanspuri Power House to an average of 1.50 km. |
| 36 | Cement |
| 37 | Steel |
| 38 | Sand |
| 39 | Carriage of stone aggergate below 20mm nominal size |
| 40 | Providing and installation of 1HP Electric Pump i/c fixing and connect to existing pumping line etc. Model No. Crompton CHAMP PLUS 1 or its equivalent to crompton/Kirloskar/Cimmins etc. |
| 41 | Providing and laying PVC pipe of dia 100mm and to connect existing rain water pipeline etc. |
AI Tender Summary
Tender Timeline
Apr 04, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedApr 15, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 15, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender