|
| 1 | Providing and services of Beldar cum Sewer Man equipped with necessary T&P for attending day to day complaints like such removing blockage in floor trap, gully trap, WC trap, T-bend, manhole, sewer line, grease chamber, and kind of drainage line, vertical stack etc complete. |
| 2 | Providing services of Maintenance Multitasking (Skilled) Worker with necessary T&P for attending day to day maintenance work, Superviser including facility like Masonry,Carpentry and Plumbing etc.as per direction of Engineer-in-Charge. |
| 3 | Lifting the cover & cleaning of silt,sludge,brick bats,polythene bags, canteen waste, garbage & any kind of other material if any from choked manholes/chambers pipe line under ground level/ at all levels and dewatering to make it functional. Carrying out job with all tools & safety equipments such as buckets, rope safety belt, gas mask pump mechanical cleaning devices oxygen cylinder etc including disposal of silt, sludge, upto desired location/dumpimg ground from the following:- |
| 4 | Manholes depth upto 0.90 m |
| 5 | Manholes depth from 0.91m upto 1.5m |
| 6 | Manholes depth from 1.5m upto 3.00m |
| 7 | Cleaning of Open Drain Surface Runoff and Storm Water Linechocked as well as under routine maintenancebyusing pressurized water and necessary T & P equipment for storm water line upto 1000 MM Width 600mm Depth as per the direction of engineer - in - charge.(Note: Storm water line includes & surface runoff network)(Lifting the cover & cleaning of silt,sludge,brick bats,polythene bags, canteen waste, garbage & any kind of other material if any from choked manholes/chambers pipe line under ground level/ at all levels and dewatering to make it functional; Carrying out job with all tools & safety equipments such as buckets, rope safety belt, gas mask pump mechanical cleaning devices oxygen cylinder etc including disposal of silt, sludge, upto desired location/dumpimg ground from the following ) |
| 8 | Cleaning of Sewer Linechocked as well as under routine maintenancebyusing sewer cleaning rod and pressurized water includingnecessary T &P equipment for from 150 to 300mm diameter lines as per the directions ofengineer - in - charge.(Item to be executed for line cleaning square / rectangular manhole)(Lifting the cover & cleaning of silt,sludge,brick bats,polythene bags, canteen waste, garbage & any kind of other material if any from choked manholes/chambers pipe line under ground level/ at all levels and dewatering to make it functional; Carrying out job with all tools & safety equipments such as buckets, rope safety belt, gas mask pump mechanical cleaning devices oxygen cylinder etc including disposal of silt, sludge, upto desired location/dumpimg ground from the following ) |
| 9 | Cleaning of storm water linechocked as well as under routine maintenancebyusing pressurized water and necessary T & P equipment for storm water line from 150 to 300mm diameter as per the direction of engineer - in - charge.(Note: Storm water line includes both roof top network & surface runoff network).(Lifting the cover & cleaning of silt,sludge,brick bats,polythene bags, canteen waste, garbage & any kind of other material if any from choked manholes/chambers pipe line under ground level/ at all levels and dewatering to make it functional; Carrying out job with all tools & safety equipments such as buckets, rope safety belt, gas mask pump mechanical cleaning devices oxygen cylinder etc including disposal of silt, sludge, upto desired location/dumpimg ground from the following ) |
| 10 | Cleaning of small drains by opening the iron/ss/stone/cement/precast Rcc, grating and refixing after proper cleaning as per direction of engineer in charge. |
| 11 | Cleaning of 0.6 MLD capacity Sewage Treatment Plants ( Total = 2 Nos. such plants) and disposable of sludge outside IITGN Campus.(Agency shall be responsible for safe disposal of sludge as per corporation norms. Quoted rate shall be inclusive of dealing with GMC Office, obtaining necessary permissions etc. all complete). (Agency shall ensure and implement safe working conditions for his labourers during execution, all necessary safety measures and harness shall be used before taking up of work)(Suitable lighting and ventilation should be provided by the Agency before cleaning of covered tanks)(Agency shall be solitary responsible for the lapses in safety during work annd allied compensations. Nothing extra shall be paid separtely.)(Cleaning Activity shall be started with emptying tanks by Sludge Suction Tanker , brushing RCC Walls and Baffle Walls with Nylon Brush, use of appropriate cleaning Solution, cleaning detergent with water to ensure no fungus or algae remain on the walls.)Work shall be taken up in a sequential manner as per schedule provided by STP AMC Agency.Cleaning Cycle shall be scheduled by IISER Pune. Quoted Rate shall be inclusive of GST. |
| 12 | Setller ( Disposal of Sudge by Sludge Sunction Pump and Tanker with disposal as per corporation norms) along withbrushing RCC Walls and Baffle Walls with Nylon Brush, use of appropriate cleaning Solution, cleaning detergent with water to ensure no fungus or algae remain on the walls. |
| 13 | Taking out, stacking, sorting, washing with pressure jet and putting backof serviceable material like stone aggregate vaying from size 12mm upto 120mm from PGF of STP and disposal of unserviceable material within 50 Metres lead and putting back the servieable material to PGF as per direction of Engineer-in-charge : |
| 14 | Supplying & laying single sized 16 to 20 MM Stone Aggregate for recharge of PGF As per direction of Engineer In-charge |
| 15 | Supplying & laying single sized20 to 25 MM Stone Aggregate for recharge of PGF As per direction of Engineer In-charge |
| 16 | Supplying & laying single sized 90 to 120 MM Stone Aggregate for recharge of PGF As per direction of Engineer In-charge |
| 17 | Cleaning of ABR chambers, dewatering the tank and removing excess sludge/silt/deposits from Anaerobic Baffle Reactor (ABR) chambers/below filter media and disposal of the same , by removing and refitting the precast RCC manhole cover etc. as per direction of the engineer - in - charge.(Total 42 chamber of various size , 12 filter media chamber of 4mx2mx1m and 6 of 4mx1.5m size and total depth of 3.46m.Total capacity is approx 6 lac lit).Contractor must ensure proper safety of workers.(The walls, tiles & floor shall be cleaned neat to the entire satisfaction of Engineer-in-charge.) |
| 18 | Supply & fixing ofC- I Cover without frame - 300X300mm (low duty) |
| 19 | Supply and fixing RCC square perforated cover of size 590X590 mm without frame as per the directions of Engineer In charge |
| 20 | Supply & fixing CI square perforated cover of size 450X450 mm without frame as per direction of Engineer In charge |
| 21 | Providing andfixing upto 50 mm thick Rough Bijolia Grey stone tops of approved shade and texture with maximum stone size up to 1200mmx600mm and calibrated thickness 40 mm, in required design and patterns, in linear as well as curvilinear portionsover 20 mm thick base of cement mortar 1 : 4 (1 cement : 4 coarse sand) , side buttered with CM 1:2. ( 1 cement : 2 stone dust) with uniform joints 4mm thick, ruled finished to 4mm depth wherever required as per Architectural drawing anddiection of Engineer in charge. |
| 22 | Wall painting with Brick red paint of Exterior grade,having VOC (Volatile Organic Compound ) contentof approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour:One or more coat |
| 23 | Painting with water based silicon sealant of approved make over the surface of exposed RCC Wall/Slab/column/beam etc including the cost of cleaning the surface of wall with necessary chemicals to achieve the virgin surface before application of sealant including caffolding etc .complete as per manufacturer specification and direction of Engineer-in charge:-Two coats |
| 24 | Cleaning of terrace PVC water storage tank of 500 to 1000 Liter (average) capacity at all hights with brushes, duster and approved cleaning agent including removal of silt, rubbish from the tank and cleaning the tank with fresh water including disinfecting with bleaching powder @0.50 gm/Ltr capacity of tank i/c writing of date of cleaning with paint all complete as per direction of Engineer-in-charge. The walls, tiles & floor shall be cleaned neat by removing all the deposits and algae etc..to the entire satisfaction of Engineer-in-charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 500 per tank)(i) All main Gate Security cabin & Ghaschara Building |
| 25 | Providing and Laying SN8 pipeconfirming to ISI , including cost of approved quality , complete as per direction of Engineer-in-charge. |
| 26 | SN-8 pipe - 150mm dia |
| 27 | SN-8pipe - 200mm dia |
| 28 | Supplying of PVC pipe of following dia used for water supply as per direction of Engineer-in-charge. (Make: Finolex, Vectus, Supreme, Prince, Astral) |
| 29 | PVC pipe - 40mm nominal dia |
| 30 | PVC pipe - 50mm nominal dia |
| 31 | PVC pipe - 63mm nominal dia |
| 32 | PVC pipe - 75mm nominal dia |
| 33 | PVC pipe - 90mm nominal dia |
| 34 | PVC pipe - 110mm nominal dia |
| 35 | PVC pipe - 160mm nominal dia |
| 36 | Supplying of PVC coupler used rain water pipes of following dia. as per direction of Engineer-in-charge. (Make: Finolex, Vectus, Supreme, Prince, Astral) |
| 37 | PVC coupler - 40mm nominal dia |
| 38 | PVCcoupler - 50mm nominal dia |
| 39 | PVCcoupler - 63mm nominal dia |
| 40 | PVC coupler - 75mm nominal dia |
| 41 | PVCcoupler - 90mm nominal dia |
| 42 | PVC coupler - 110mm nominal dia |
| 43 | PVCcoupler - 160mm nominal dia |
| 44 | Supplying of PVC elbow 90° used rain water pipes of following dia. as per direction of Engineer-in-charge. (Make: Finolex, Vectus, Supremo, Prince) |
| 45 | pvc elbow 90°- 40mm nominal dia |
| 46 | pvc elbow 90°- 50mm nominal dia |
| 47 | pvc elbow 90°- 63mm nominal dia |
| 48 | pvc elbow 90°- 75mm nominal dia |
| 49 | pvc elbow 90°- 90mm nominal dia |
| 50 | pvc elbow 90°- 110mm nominal dia |
| 51 | pvc elbow 90°- 160mm nominal dia |
| 52 | Supplying of PVC elbow 45° used rain water pipes of following dia. as per direction of Engineer-in-charge. (Make: Finolex, Vectus, Supremo, Prince) |
| 53 | pvc elbow 45°- 40mm nominal dia |
| 54 | pvc elbow 45°- 50mm nominal dia |
| 55 | pvc elbow 45°- 63mm nominal dia |
| 56 | pvc elbow 45°- 75mm nominal dia |
| 57 | pvc elbow 45°- 90mm nominal dia |
| 58 | pvc elbow 45°- 110mm nominal dia |
| 59 | pvc elbow 45°- 160mm nominal dia |
| 60 | Supplying of PVC TEE used rain water pipes of following dia. as per direction of Engineer-in-charge. (Make: Finolex, Vectus, Supremo, Prince) |
| 61 | pvc Tee - 40mm nominal dia |
| 62 | pvc Tee - 50mm nominal dia |
| 63 | pvc Tee - 63mm nominal dia |
| 64 | pvc Tee - 75mm nominal dia |
| 65 | pvc Tee - 90mm nominal dia |
| 66 | pvc Tee - 110mm nominal dia |
| 67 | pvc Tee - 160mm nominal dia |
| 68 | Supplying of Sulphuric acid for drain cleaning at site as per direction of Engineer-in-charge |
| 69 | Supplying of Stone adhesivefor stone repairing at site as per direction of Engineer-in-charge. (make: Araldite, Saint Gobain etc.) |
| 70 | Supplying of Wood adhesivefor wooden surface at site as per direction of Engineer-in-charge. (make: Fevicol SH or equivalent) |
| 71 | Supplying of GI powder coated pipe clamps of following dia pipes used for rain water as per direction of Engineer-in-charge. (Make: Finolex, Vectus, Supremo, Prince) |
| 72 | GI powder coated pipe clamps - 15 mm nominal dia. |
| 73 | GI powder coated pipe clamps - 20 mm nominal dia. |
| 74 | GI powder coated pipe clamps - 25 mm nominal dia. |
| 75 | GI powder coated pipe clamps - 50 mm nominal dia. |
| 76 | GI powder coated pipe clamps - 75mm nominal dia. |
| 77 | GI powder coated pipe clamps - 110 mm nominal dia. |
| 78 | Supplying of CPVC pipe of following dia used for water supply as per direction of Engineer-in-charge. (Make: Finolex, Vectus, Supremo, Prince) |
| 79 | CPVC pipe - 15mm outer dia. |
| 80 | CPVC pipe - 20mmouter dia. |
| 81 | CPVC pipe - 32mmouter dia. |
| 82 | CPVC pipe - 40mmouter dia. |
| 83 | CPVC pipe - 50mmouter dia. |
| 84 | CPVC pipe - 65mmouter dia. |
| 85 | Supplying of CPVC coupler for pipe of following dia used for water supply as per direction of Engineer-in-charge. (Make: Finolex, Vectus, Supremo, Prince) |
| 86 | CPVC coupler - 15mm dia. |
| 87 | CPVC coupler - 20mm dia. |
| 88 | CPVC coupler - 32mm dia. |
| 89 | CPVC coupler - 40mm dia. |
| 90 | CPVC coupler - 50mm dia. |
| 91 | CPVC coupler - 65mm dia. |
| 92 | Supplying of CPVC elbow 90° for pipe of following dia used for water supply as per direction of Engineer-in-charge. (Make: Finolex, Vectus, Supremo, Prince) |
| 93 | CPVC elbow 90° - 15mm dia. |
| 94 | CPVC elbow 90° - 20mm dia. |
| 95 | CPVC elbow 90°- 32mm dia. |
| 96 | CPVC elbow 90°- 40mm dia. |
| 97 | CPVC elbow 90°- 50mm dia. |
| 98 | CPVC elbow 90° - 65mm dia. |
| 99 | Supplying of CPVC Tee for pipe of following dia used for water supply as per direction of Engineer-in-charge. (Make: Finolex, Vectus, Supremo, Prince) |
| 100 | CPVC Tee - 15mm dia. |
| 101 | CPVC Tee - 20mm dia. |
| 102 | CPVC Tee- 32mm dia. |
| 103 | CPVC Tee- 40mm dia. |
| 104 | CPVC Tee- 50mm dia. |
| 105 | Supplying of CPVC socket for CPVC pipe of following dia used for water supply as per direction of Engineer-in-charge. (Make: Finolex, Vectus, Supremo, Prince) |
| 106 | CPVC socket - 20mm |
| 107 | CPVC socket - 32mm |
| 108 | CPVC socket - 50mm |
| 109 | Supplying ofElbow 90° for CPVC pipe of following dia used for water supply as per direction of Engineer-in-charge. (Make: Finolex, Vectus, Supremo, Prince) |
| 110 | Brass Elbow 90° -15mm dia. |
| 111 | Brass Elbow 90° -20mm dia. |
| 112 | Providing and fixing gun metal non- return valve of approved quality (screwed end)as per direction of Engineer-in-charge. (Make: Finolex, Vectus, Supremo, Prince) |
| 113 | 80 mm nominal bore:- Horizontal |
| 114 | Supplying of Brass Female Threaded Adapter (FTA) for CPVC pipe of following dia used for water supply as per direction of Engineer-in-charge. (Make: Finolex, Vectus, Supremo, Prince) |
| 115 | Brass Female Threaded Adapter (FTA)-15mm dia. |
| 116 | Brass Female Threaded Adapter (FTA)-20mm dia. |
| 117 | Brass Female Threaded Adapter (FTA)-25mm dia. |
| 118 | Supplying of Brass Male Threaded Adapter (MTA) for CPVC pipe of following dia used for water supply as per direction of Engineer-in-charge. (Make: Finolex, Vectus, Supremo, Prince) |
| 119 | Brass Male Threaded Adapter (MTA)-15mm dia. |
| 120 | Brass Male Threaded Adapter (MTA)-20mm dia. |
| 121 | Brass Male Threaded Adapter (MTA)-25mm dia. |
| 122 | Supplying of Galvanised Iron (GI) Pipes used for water supply as per direction of Engineer-in-charge. |
| 123 | GI pipe - 15mm dia |
| 124 | GI pipe - 20mm dia |
| 125 | GI pipe - 25mm dia |
| 126 | Supplying of Butterfly valve of following 100 mm dia used for water supply as per direction of Engineer-in-charge. |
| 127 | Supplying of UPVC pipe of following dia used for water supply as per direction of Engineer-in-charge. (Make: Finolex, Vectus, Supremo, Prince) |
| 128 | UPVC pipe - 40mm outer dia. |
| 129 | UPVC pipe - 50mmouter dia. |
| 130 | Supplying of UPVC coupler for pipe of following dia used for water supply as per direction of Engineer-in-charge. (Make: Finolex, Vectus, Supremo, Prince) |
| 131 | UPVC coupler - 40mm dia. |
| 132 | UPVC coupler - 50mm dia. |
| 133 | Supplying of UPVC elbow 90° for pipe of following dia used for water supply as per direction of Engineer-in-charge. (Make: Finolex, Vectus, Supremo, Prince) |
| 134 | UPVC elbow 90° -40mm dia. |
| 135 | UPVC elbow 90° -50mm dia. |
| 136 | Supplying of UPVC Tee for pipe of following dia used for water supply as per direction of Engineer-in-charge. (Make: Finolex, Vectus, Supremo, Prince) |
| 137 | UPVC Tee -40mm dia. |
| 138 | UPVC Tee -50mm dia. |
| 139 | Supplying of UPVC Female Threaded Adapter (FTA) for UPVC pipe of following dia used for water supply as per direction of Engineer-in-charge. (Make: Finolex, Vectus, Supremo, Prince) |
| 140 | UPVC Female Threaded Adapter (FTA)-40mm dia. |
| 141 | UPVC Female Threaded Adapter (FTA)-50mm dia. |
| 142 | Supplying of UPVC Male Threaded Adapter (MTA) for UPVC pipe of following dia used for water supply as per direction of Engineer-in-charge. (Make: Finolex, Vectus, Supremo, Prince) |
| 143 | UPVC male Threaded Adapter (MTA)-40mm dia. |
| 144 | UPVC male Threaded Adapter (MTA)-50mm dia. |
| 145 | Supplying of brass handle ball valve of following dia used for water supply as per direction of Engineer-in-charge. (Make: Finolex, Vectus, Supremo, Prince) |
| 146 | 15 mm nominal bore |
| 147 | 20 mm nominal bore |
| 148 | Supplying of brass nipple of following dia used for water supply as per direction of Engineer-in-charge. (Make: Finolex, Vectus, Supremo, Prince) |
| 149 | Brass nipple-1/2\"X6\" |
| 150 | Brass nipple-1/2\"X3\" |
| 151 | Brass nipple-1/2\"X9\" |
| 152 | Supplying of CPVC Solution / Cement |
| 153 | Supplying of UPVC Solution / Cement |
| 154 | Supplying of PVC Solution / Cement |
| 155 | Supplying of White Teflon tape 10mt length roll |
| 156 | Supplying of M-Seal |
| 157 | Supplying of Acrylic UV Resistant Silicone Sealant 280 gms. Tube |
| 158 | Supplying of Fevi kwik3 grams Tube |
| 159 | Supply CI square perforated cover of size 450X450 mm without frame as approved by Engineer In charge |
| 160 | Supplying of 560 dia heavy duty CI cover without frames approved by Engineer-in-charge. |
| 161 | Supplying of pillar cock auto closing system PRS-CHR-031 used for water supply as per approval of Engineer-in-charge. (Make: Jaquar) |
| 162 | Supplying of angular stop cock FLR-CHR-5053N used for water supply as per approval of Engineer-in-charge. (Make: Jaquar) |
| 163 | Supplying of bottle Trap 9\" F8060302 as per approval of Engineer-in-charge. (Make: Jaquar) |
| 164 | Supplying of connection pipe of 12.5mm dia of 36\" length used for water supply as per approval of Engineer-in-charge. (Make: Jaquar) |
| 165 | Supplying of Hand Shower (Health Faucet) ALD-CHR-573 used in W/Cas per approval of Engineer-in-charge. (Make: Jaquar) |
| 166 | Supplying of Hand Shower (Health Faucet) stand used in W/Cas per approval of Engineer-in-charge. (Make: Jaquar) |
| 167 | Supplying of Anti microbial seat cover B1520101suitable for European W/C as per approval of Engineer-in-charge. (Make: CERA) |
| 168 | Supplying of flush cover new CAT no: B1120105 & old Cat no: 2306 KNOB suitable for European W/C as per approval of Engineer-in-charge. (Make: CERA) |
| 169 | Supplying of 2-Way Bib cock FLR-CHR-5041N used for water supply in W/Cas per approval of Engineer-in-charge. (Make: Jaquar) |
| 170 | Supplying of Toilet Roll HolderAKP-CHR-35751P used for hanging toilet paper in W/Cas per approval of Engineer-in-charge. (Make: Jaquar) |
| 171 | Supplying of Inlet and outlet of rubber Gasket ZPS-WHT-GK01 as per approval of Engineer-in-charge. (Make: Jaquar) |
| 172 | Supplying of Urinal valve auto closing system of PRS-CHR-077as per approval of Engineer-in-charge. (Make: Jaquar) |
| 173 | Supplying of Urinal waste coupling of 32mm Dia ALD-CHR-709-L130as per approval of Engineer-in-charge. (Make: Jaquar) |
| 174 | Supplying of SS grating (150mmX150mm) used as floor trap as per approval of Engineer-in-charge. |
| 175 | Supplying of Single Towel Rail 30cm long as per approval of Engineer-in-charge. (Make: Jaquar) |
| 176 | Supply of SS Baby Latch 2\" long for doors as per approval of Engineer-in-charge.(Make: Kich) |
| 177 | Supply of Pin Cylinder for lock(PC55KKS100)as per approval of Engineer-in-charge.(Make: Kich) |
| 178 | Supply of SS door aldrop 250mm long AAD1410C as per approval of Engineer-in-charge.(Make: Arch) |
| 179 | Supply of SS door handle 6\" as per approval of Engineer-in-charge.(Make: Kich, Arch) |
| 180 | Supply of SS 6\" long hinges for door as approved byEngineer-in-charge.(Make: Kich, Arch) |
| 181 | Supplying of Tap Knob ( Handle - DIV-5065K) as per direction of Engineer-in-charge. |
| 182 | Supply of lock for glass doors (PF148) as per approval of Engineer-in-charge. |
| 183 | Supplying of Glass Lowers of varying sized and thickness 5 mm as per direction of Engineer-in-charge. |
| 184 | Supply of Anchor Fastner as per approval of Engineer-in-charge(Size 8 to 12 mm dia and 75mm to 150mm long) |
| 185 | Supplying of CERA make Pusher Rod PR 2609 as per approval fo engineer-in-chare |
| 186 | Supplying of White Cement as per approval for engineer-in-chare |
| 187 | Supplying of OPC Cement as per approval for engineer-in-chare |
| 188 | Supply of Silding window lock as per approval of Engineer-in-charge. |
| 189 | Supply of Pollo Tap as per approval of Engineer-in-charge. |
| 190 | Supplying of Tap filter knob as per approval of Engineer-in-charge. |
| 191 | Supplying of FLUSH TANK VALVE FV 2609 as per approval of Engineer-in-charge. |
| 192 | Supplying of Rubber Ball of CI Air valve as per approval of Engineer-in-charge. |
| 193 | Supplying of Rubber Gasket of CI air valve as per approval of Engineer-in-charge. |
| 194 | Supplying of Wire Mesh jali per approval of Engineer-in-charge. |
| 195 | Supplying of Teak wood beading pati as per approval of Engineer-in-charge.(Size-40x10mm) |
| 196 | Supplying of welding machine and fitter as per Engineer-in-charge. |
| 197 | Supplying of breaker machine and fitter as per Engineer-in-charge. |
| 198 | Supply of flexible waste pipes connection (32 mm dia, 800 mm length) type F8070404 or equivalent as approved byEngineer-in-charge.(Make: CERA, Kich, Arch) |
| 199 | Supplying Satin stainless steel Foot operated Door Stopper with rubber bufferof approved quality with necessary SS screws etc.as per approval of direction of Engineer-in-charge : Manufacturer\"s warranty/guarantee card needs to be submitted. (Make: Kich, Arch, Dorma, GEZE) |
| 200 | Supplying Surface mounted door closer of approved quality with necessary accessories and screws all complete as per approval of Engineer-in-charge : Manufacturer\"s warranty/guarantee card needs to be submitted, installation has to be certified by the Manufacturer in writing. (Make: Kich, Arch, Dorma, GEZE) |
| 201 | SupplyingSS 304 grade satin finished Push-Pull Handle (square) in pairsin door/ window (aluminum / wooden flush shutters) with necessary SS 304 grade screws etc. complete as per approval ofEngineer in charge (Make: GEZE - 169825/HAFELE -903.00.370,/EBCO - D-GDH-2230) |
| 202 | Supply of 5mm thick superior make glass used as mirror for washrooms, pantry etc. as per approval of Engineer-in-charge. |
| 203 | Supply of 5mm thk. Float glass used as glazing in aluminum door, window, ventilator shutters and partitions etc. as per approval of Engineer-in-charge. |
| 204 | Supply of wire mesh / reflective / plain glass strips of 6mm thickness in as per approval of Engineer-in-charge. |
| 205 | Supply of EPDM rubber / Neoprene / Aluminium gasket used as edgingin aluminum door, window, ventilator shutters and partitions etc. as per approval of Engineer-in-charge. |
| 206 | Supplying of stainless steel brush/satin finish tower bolts with necessary SS screws complete as per architectural drawing and as per direction of Engineer-in-charge. |
| 207 | 450 mm long |
| 208 | 300 mm long |
| 209 | 250 mm long |
| 210 | Supplying of C.P. brass over head shower with 15 mm inlet with shower arm of approved make and conforming to Manufacturers Standards. |
| 211 | Over head shower. Jaquar OHS-1757 140 mm diameter with shower arm: Jaquar SHA-477 |
| 212 | Extra for making toughening of glass as directed by the Engineer in charge. |
| 213 | 6 mm thick glass |
| 214 | Providing and Fixing of Euro profile half cylinder,42 mm Make Dorma lock set as per direction of Engineer-in-charge |
| 215 | Bijoliya stoneflooring over 20 mm (average) thick base laid over and jointedwith grey cement slurrymixed with pigment to match the shade of the slab, including and cutting of calibrated stone complete with base of cement mortar 1: 4 (1cement : 4 coarse sand) as per direction of engineer in charge. 25 mm thick bijoliya stone |
| 216 | Material and labour for cutting groove at junction of RCC and Brick masonry of size 8-10mm wide and upto full depth of plaster and making it good by cement plaster and existing specification. |
| 217 | Repairs of cracks in walls by cutting the plaster upto full depth with the help of cutting machine and filling the groove with crack filler of Dr. Fixitor Pidilite or Asian and making the surface smooth as per direction of engineer in charge. |
| 218 | Repair of cracks in road by making V- shaped joint with 3 to 5 mm saw blade, 10mm diameter grout holes@300mm c/c,cleaning the crack with wire brush and then pumping low viscosity epoxy resin in holes and cracks by using grout gun i/c finishing the top surface smooth as per direction of engineer in charge. |
| 219 | Buffing of SS railing upto 50mm dia or upto 50mmX50mm rectangular tube sections for any surface spots and making good all as directed by engineer in charge. |
| 220 | Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes, having thermal stability for hot & cold water supply including all UPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. : External Work (40 mm nominal outer dia Pipes) |
| 221 | Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes, having thermal stability for hot & cold water supply including all UPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.: External Work (50 mm nominal outer dia Pipes) |
| 222 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC pipes conforming to IS : 14735 , including jointing to satisfaction of engineer-in- charge with proper care, protecting fittings & pipes till the final handing over etc as directed by E-I-C complete as per specifications & drawing provided for all places, all heights & all levels |
| 223 | Coupler for 50mm dia pipe |
| 224 | Coupler for 40mm dia pipe |
| 225 | Elbow 90 degree for 50mm dia pipe |
| 226 | Elbow 90 degree for 40mm dia pipe |
| 227 | Female Threded Adepter for 15mm dia pipe |
| 228 | Female Threded Adepter for 20mm dia pipe |
| 229 | Male Threaded Adepter for 15mm dia pipe |
| 230 | Male Threaded Adepter for 20mm dia pipe |
| 231 | Supply & fixing ofCI Cover without frame - 300X300mm (low duty) |
| 232 | Supplying Tractor with trolley per day as per direction of Engineer In charge. |
| 233 | Repairing of servicing with Grease/oil including spring and other all mechanical part at existing rolling shutter different location in IIT Gandhinagar as per the engineer- in-charge. |
| 234 | Making out a hole up to 30 mm to 80mm dia in RCC wall by using core cutting machine, fixing of UPVC pipe in the RCC core and finishing the same with cement mortar 1:4 (1 cement : 4 fine sand) groutingas per the direction of engineer - in - Charge. |
| 235 | Supplying Health Faucet Shower Tube as per Requirement. |
| 236 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 237 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smoothcomplete. |
| 238 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.One coat |
| 239 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 Metres lead.For thickness of tiles 10 mm to 25 mm |
| 240 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 241 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 242 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 243 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on otherside |
| 244 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 245 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (bothside inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats ofprimer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitablyfixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 246 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 247 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 123. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrshrs.On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) |
| 248 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red Area of slab over 0.50 sqm |
| 249 | Washed stone grit plaster on exterior walls height upto 10 Metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square Metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately). |
| 250 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 Metre lead as per direction of Engineer-in-Charge. |
| 251 | Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineerin-charge. (Old CC paver blocks shall be supplied by the department free of cost). |
| 252 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 Metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 253 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 254 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 255 | Hire Hydralic Excavator(3D) with driver and Fuel |
| 256 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 257 | Providing services of Helper(Beldar/Coolie) with necessary T&P for assisting in attending day to day maintenance work, Superviser including facility like Masonry,Carpentry and Plumbing etc.as per direction of Engineer-in-Charge. |
| 258 | Execution of items of different sub-heads of CPWD DSR-2023(These items are to be executed on specific direction of engineer - in - charge as per exigency of work up to value of Rs. 5 Lacs.) |
