Tender For Revamping Of Damaged Heat Tracing System At Bpa And Bpb
Tender Overview
Project Description
Revamping Of Damaged Heat Tracing System At Bpa And Bpb Revamping Of Damaged Heat Tracing System At Bpa And Bpb Of B And S Asset On Lstk Basis
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-Apr-2025 | Extenstion of Bid submission date | Date | 01-May-2025 |
| 2 | 29-Apr-2025 | Bid submission extension | Date | 08-May-2025 |
| 3 | 08-May-2025 | extension | Date | 14-May-2025 |
BOQ
| Sl. No. | Item Description |
| 1 | Item description |
| 2 | Self-Regulating Heat tracing cable, 230Vac, 20W/ft |
| 3 | Thermal insulation (compatible with heat tracing) 1200 X 6 ft*ft |
| 4 | Line sensing control thermostat with flameproof JB, (10-110Deg.C), contactor (20Amp) and thermostat relay & sensor – 10ft steel capillary |
| 5 | End Seal kit of heat tracing system (tolerance 150 degC) |
| 6 | Thermal conductive paste (100gm) |
| 7 | Adhesive Aluminum tape (2.5’’ wide, 50m roll) |
| 8 | Adhesive Rubber tape (2’’ wide, 20m) |
| 9 | Dismantiling of existing material at BPA |
| 10 | Installtion and commisioning of new material at BPA |
| 11 | Heat tracing cableSelf regulating heat tracing cable240Vac, 9W/m, with termination kit |
| 12 | Heat tracing cableSelf regulating heat tracing cable 240Vac, 32W/m, with termination kit |
| 13 | Heat tracing cableSelf regulating heat tracing cable 240Vac, 24W/m, with termination kit |
| 14 | Heat tracing cableSelf regulating EL. Heating cable,240Vac, 50Hz, 36W/m, with termination kit |
| 15 | ThermostatVoltage:120-270Vac, 30ATemperature range: 0 to 250OF Bulb dimensions-1/4” x 6-3/8” (6.4 x 162 mm)Bulb material -nickel-plated copperCapillary length-6’ (1.8 m)Capillary material-nickel-plated copperCapillary armor -flexible stainless stee |
| 16 | ThermostatVoltage: 250Vac, 30ATemperature range: 0 to 250OF Bulb dimensions-1/4” x 6-3/8” (6.4 x 162 mm)Bulb material -nickel-plated copperCapillary length-6’ (1.8 m)Capillary material-nickel-plated copperCapillary armor -flexible stainless stee |
| 17 | LCS with selector switchEx-d zone-1, IP-66, 3 position ‘Hand-Off-Auto’ switch, 3 nos of ¾ ET cable entryMaterial: SS 304/ SS 316Area classification: Gas Group IIA & IIB |
| 18 | Junction boxEx-d zone-I, Gas group IIA & IIB, IP-66, 2 nos ¾” ET (F) and 1 nos 1” ET (F) cable entry.Material: SS 304/ SS 316 |
| 19 | Main Distribution board for BCP-B2Incoming feeder, outgoing feeder consisting of MCCB, MCB, RCBO, Indication lamps, CT, Ammeters, Voltmeters, Selector SwitchesMaterial: SS 304/ SS 316Type of enclosure: Ex-d, Zone-IArea Classification: Gas Group IIA & IIB |
| 20 | Glands (M20, M25, ¾” ET, 1” ET, ½” NPT, ¾” NPT etc)Gas group IIA & IIB, Armoured cableMaterial: SS |
| 21 | Heat tracing cable glands (PG 16 Raychem C1629 or equivalent is acceptable) |
| 22 | Thermal insulation (compatible with heat tracing) |
| 23 | Thermal conductive paste (100gm) |
| 24 | Adhesive Aluminum tape (2.5’’ wide, 50m roll) |
| 25 | Adhesive Rubber tape (2’’ wide, 20m) |
| 26 | Dismantiling of existing material BPB |
| 27 | Installtion and commisioning of new material BPB |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedCorrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender