|
| 1 | 11 KV AB Switch Polymer type 400 Amp with Complete fitting |
| 2 | D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel |
| 3 | 9 KV Gapless type ( 5KA) Polymer for DTR |
| 4 | Transformer mounting Channel (100X50x6 mm.) |
| 5 | Trans. Belting with 50 X 50 X 6 mm.angle with two cross fixing channels |
| 6 | Stay set complete without Stay wire 16 mm. (Painted) |
| 7 | STAY WIRE 7/3.15 MM.(7/10 SWG) |
| 8 | Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) |
| 9 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 10 | Concreting of structures & foundation (1:3:6) |
| 11 | Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay |
| 12 | Complete jumpering of DTR |
| 13 | Danger Boards Enamelled 11 KV |
| 14 | Bi-metallic clamps Distribution Transformers Bushing |
| 15 | Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC |
| 16 | Red oxide paint |
| 17 | Aluminium paint |
| 18 | M.S.Nuts with Bolts |
| 19 | D.O.Mounting Channel 75x40x6mm |
| 20 | Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) |
| 21 | LT distribution box with 1.2 mm thick MS powder coated sheet, 200 A MCB on incoming & 6 no. 125 A HRC fuse base including 100 A HRC fuse , For 100 KVA Transformer |
| 22 | Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box |
| 23 | G.I. STRIP 25X3 MM1 |
| 24 | G.I.Pipe 40 mm Dia C grade type |
| 25 | Bentonite compound powder |
| 26 | Galvanized nut & bolt with washer |
| 27 | Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 28 | 11 KV V cross arm 65X65X6 mm. angle type |
| 29 | 11 KV Top clamp 65X65X6 mm. angle type |
| 30 | DTR S/s fencing (37 feet) of 6\" with on MS Angle(50x50x6mm) 7No, 7\"Height |
| 31 | Double Gate (2No-2.5\"x5x) set of MS angle (25x25x4mm) with mesh & locking |
| 32 | Material GST On @18% |
| 33 | Labour Charge |
| 34 | GST Labour Charge@18% |
| 35 | Transportation Charge |
| 36 | GST ON TRANSPORTATION CHARGE @5% |
| 37 | Grand Total |
