Tender For 110Kv Bay Extension Work At Thirunindravur 110/33-11Kv Ss For Alternate 110 Kv Source To Thirunindravur 110 Kv Ss From The Alamathy 400 Kv Ss And Labour Charges For Stringing Of Jumper Span.
Tender Value
23.90 Lakhs
Estimated cost
Bid Submission
15 Apr 2025
0 days left
EMD
23900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thirunindravur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
110KV Bay extension work at Thirunindravur 110/33-11KV SS for alternate 110 KV source to Thirunindravur 110 KV SS from the Alamathy 400 KV SS and Labour charges for stringing of Jumper span.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation soil and depositing on bank with initial lead of 10m and lift of 2m in Hard gravelly soil, stiff clay, block cotton,gravel, stoney earth and earth mixed with small size boulder etc., completeincluding cost of all materials lead lift etc complete as directed by the department engineer at site. |
| 2 | labour charges for transporting the surplus excavated earth, debris atc.,away from the site to a lead of 5 KM including cost of all materials lead lift etc complete as directed by the department engineer at site. |
| 3 | Labour charges for Re filling in foundationwith excavated earth in layers not more than 15 cm thick well rammed and watered consolidated etc complete as per standard specification |
| 4 | Laying Plain Cement Concrete 1:3:6 using 20 mm HBG stoneincluding cost of all materials, labour, transport, curing, lead, lift etc. complete as per standard specification and as directed by the dept. Engineer at site. |
| 5 | Providing and laying P:C:C 1:2:4 using12-20mm HBG metalwithout form work including cost of all materials,curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site |
| 6 | Providing and laying P.C.C 1:2:4 using 12-20mm HBG stone withform workusing steel centering for soffits of reinforced cement concrete slabs or plain surfaces including stutting up to 3m high, using M.S. Sheets of size 90cm x 60cm. and \"B.G.10\" guage, stiffened with welded M.S. angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5cm. (spaced at about 90 cm c/c) and supported by casurina props of 10cm to 13cm. dia (spaced at 75cm c/c) complying with standard specification including cost of all materials,transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site. |
| 7 | R.C.C. 1:1.5:3 using 12- 20mm metal withform work using steel centering for soffits of reinforced cement concrete slabs or plain surfaces including stutting up to 3m high, using M.S. Sheets of size 90cm x 60cm. and \"B.G.10\" guage, stiffened with welded M.S. angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5cm. (spaced at about 90 cm c/c) and supported by casurina props of 10cm to 13cm. dia (spaced at 75cm c/c) complying with standard specification including cost of all materials,transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site. Raft Concrete |
| 8 | Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade with a minimum cement content of 360 kg per cu.m for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement. (up to basement level) RCC Wall. |
| 9 | Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade(with a minimum cement content of 360 kg per cu.m) for reinforcedconcrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement. Pre Cast slab |
| 10 | Providing steel reinforcement for all RCC works including cost of all materilas steel, binding wire, labour, lead, lift,cutting, bending, typing and binding and placing in positionetc., complete as per standard specification and as directed by the department engineer at site. |
| 11 | Fabriaction, galvanising and supply of foundation boltand nuts with 2 nos.washerin High Tensile Steelincluding 10 cm L at bottom and15 cm threading with 2 nuts and washers at top including cost of all materials, labour, lead, lift etc. complete as directed by the dept. Engineer at site. |
| 12 | Providing grout holes at required position including cost of all materials, curing,labour, lead and lift etc., completeas directed by the department engineer at site. |
| 13 | Labourcharges for assemblingof template in correct position and alligenment for various equipment plinth and grouting the foundation bolt including cost of all material transport , labour,lead, lift etc, complete as directed by the dept. Engineer at site. (The templete will be make own arrangement by the contractor) |
| 14 | Plastering in CM 1:520 mm thickincluding cost of all materials, transport, curing, labour, lead, lift etc. complete.as per standard specification and as directed by the dept. Engineer at site . |
| 15 | Supplying & fixing gunmetal wheel valve including cost of materials, labour, lead & lift etc., complete as directed by the department engineer at site. 32 mm dia |
| 16 | Supplying & fixing gunmetal wheel valve including cost of materials, labour, lead & lift etc., complete as directed by the department engineer at site. 25 mm dia |
| 17 | Supplying & fixing gunmetal wheel valve including cost of materials, labour, lead & lift etc., complete as directed by the department engineer at site. 20 mm dia |
| 18 | Supplying, laying of PVC pipe with required PVC bend T&L bend, union including cutting, jointing, wherever necessary earth work excavation refilling dismantling masonry if necessary including cost of all materials, lead & lift etc.., complete as directed by the department engineer at site. 32 mm dia |
| 19 | Supplying, laying of PVC pipe with required PVC bend T&L bend, union including cutting, jointing, wherever necessary earth work excavation refilling dismantling masonry if necessary including cost of all materials, lead & lift etc.., complete as directed by the department engineer at site. 25 mm dia |
| 20 | Supplying, laying of PVC pipe with required PVC bend T&L bend, union including cutting, jointing, wherever necessary earth work excavation refilling dismantling masonry if necessary including cost of all materials, lead & lift etc.., complete as directed by the department engineer at site. 20 mm dia |
| 21 | Engaging JCB for levelling the ups and downs of the location for making of foundation including cost of all labour, transport, T&P, lead lift etc., complete as directed by the department engineer at site. |
| 22 | Painting 2 coats with approved plastic emulsion paint over one priming coat of plastic emulsion paint over cement plastered wall surface, ceilling and other new surface including cost of all materials, colur pigments labour, lead, lift etc. complete.as per standard specification and as directed by the dept. Engineer at site |
| 23 | Dismantling of existing PCC plinth including cost of all materials, lead, lift, labour charges, etc., complete as per standard specification and as directed by the department engineer at site. |
| 24 | Dismantling of existing RCC transfomer gantry including cost of all materials, lead, lift, labour charges, etc., complete as per standard specification and as directed by the department engineer at site. |
| 25 | Dismantling of the existing brick work transformer gantry including cost of all materials, lead, lift, labour charges, etc., complete as per standard specification and as directed by the department engineer at site. |
| 26 | Supplying, fabrication of MS angle including cost of angle, flats as per drawing and specification and galvanising, placing in position including cost of all materials, galvanizing charges, transportation, labour, lead etc., complete as directed by the department engineer at site. |
| 27 | Labour charges for Filling with stone dust including watering and consolidation as per standard specification, including cost of all labour, transport, T&P, lead lift etc., complete as directed by the department engineer at site. |
| 28 | Supplying and filling 20mm metalincluding cost of all materials, labour, lead and lift etc., completeas directed by the department at site. |
| 29 | Supplying and erection of hardware fittings as directed by the engineers at site incluidng cost of all materials, labour, cutting, bending, threading, welding and galvanising, transport,lead and lift etc., complete in all respects as per standard specifiction. SingleSuspension fittings for ACSRPanther |
| 30 | Supplying and erection of hardware fittings as directed by the engineers at site incluidng cost of all materials, labour, cutting, bending, threading, welding and galvanising, transport,lead and lift etc., complete in all respects as per standard specifiction.Single Tension fittings for ACSR Panther |
| 31 | Labour charges for Transporting and hoisting of 7 units 90 KN Ordinary suspension insulators with fittings from store to site including cost of all labour, transport, lead, lift, etc., complete as directed by the department engineer at site. |
| 32 | Labour charges for Transporting and 8 units 120 KN Ordinary Tension insulators with fittings from store to site including cost of all labour, transport, lead, lift, etc., complete as directed by the department engineer at site. |
| 33 | Labour charges for transporting and paying out of 3 nos Panther conductor with fittings including sorting out of conductor, providing trussels of 30.0m intervals for paying out of conductors, according to drum schedule and loading and unloading at site providing trussels cost of T&P lead and lift etc., complete. |
| 34 | labour charges forstringing of 3 nos Panther conductor rough sagging tensioning to correct sag and fixing to towers as per specification with fittings cost of T&P lead and lift, etc., complete as directed by the department engineer at site. |
| 35 | GST for bidders within TamilNadu |
| 36 | SGST |
| 37 | CGST |
| 38 | GST for bidders outside TamilNadu (IGST) |
AI Tender Summary
Tender Timeline
Apr 02, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedApr 15, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 16, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender