New Siwar line/water line of Chadar Sauchalayo and painting work of building in Municipal Corporation Jhansi main building (all ponds) - Renovation and Painting work)- Scraping old Wtite -i-coo-iast irrctuffi disposal of refuse material as directed by engineer in charge with a distance of 60 meter . (200feet) 2 Providing and Applying Plaster of Peris Putty to 02 MM thickness over Plasterod Surface to prepare the surface even and smooth complete 3 Finishing walls with water proofing cement paint to approved make and qulity on new work with two coat to give to give an even shade including supply of all material labour and t&P etc. required for proper completion of the work 4 Painting or Varnshing on iron works in small areas or new wood with one coat of ready mixed priming paingt & one coat of approved superior quality ready mixod paint of clear synthetic varnish including supply of all materials labour and t&P etc required for proper completion of the work paint be used should confirm to the ISI NO 103 1950 5 supply and fixing of work / painting one coat putty and two coat oil paint inculidng material labour t&P etc all complete 6 Supply and Fixing of alluminium door of inculding fixing & adjestment of hinges, bolts locks. Handles fitting etc all complete 7 Supply and Fixing Steel railing etc all complete 8 (water Proofing work)- Providing and applying solying solvent free, two componet (ASTMD16, Type V) Polyurethane Coating System, Non-Tar Extended Standard 1.00mm (DRYTHANE Std.) with Highly Elastic Base Coat 0.50mm (400HE) for high crack spanning capability. Tough durable film, highly reistand to mechanical damage and totallyimpervious to water immersion. Product shall not emit any volatile organic compounds ( VOC) or odor and will be totally environment friendly. 9 (Drain System Sewer Line Drinking Water Work)- Dismantling tile work in floors and roofs laid in cement mortar includingstacking material within 50 metres lead. 10 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, huttering, finishing and reinforcement - All work up to plinth level : 11 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc.complete. 12 Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level in all shapesand sizes in : 13 12mm thick cement plasterin 1:4 cement, fine sand etc all complete. 14 15 mm cement plaster 1:4 on rough side of wall 15 P/LRCC 1:1.5:3 all works upto plinth level 16 P/LRCC 1:1.5:3 all works above plinth level 17 Centering shuttering for foundation bases of columns etc. 18 Steel reinforcement for RCC works 19 Providing and laying Polished Granite stone flooring in required design andpatterns, in linear as well as curvilinear portions of the building all complete asper the architectural drawings with 18 mm thick stone slab over 20 mm (average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointedwith cement slurry and pointing with white cement slurry admixed with pigmentof matching shade including rubbing , curing and polishing etc. all completeas specified and as directed by the Engineer-in-Charge. 20 Providing and fixing aluminiumtubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 21 Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture etc. 22 Finishing wall with putty brand of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 23 P & F CPVC pipe 20 mm dia internal work 24 P & F CPVC pipe 50 mm dia internal work 25 Prov. & placing polythene Water tank 26 P & F CP Brass Bib cock 15 mm dia 27 P & F CP Brass long nose Bib cock 15 mm dia 28 P & F CP Brass stop cock 15 mm dia 29 P & F CP Brass angle valve 15 mm dia 30 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 31 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 32 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes. 33 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :32 mm nominal bore 34 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (A) White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 35 Providing & fixing of Single Lever Basin Mixer as per the approveddesign all complete as per drawing, specification and direction of engineer incharge. Make-Jaquar/American Standard/Kerovit Eqivalent 36 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality &make and as per the direction of Engineer-in-charge. 37 Providing and fixing of Towel Ring as per the approveddesign all complete as per drawing, specification and direction of engineer incharge. 38 Providing and fixing of Soap Dish as per the approveddesign all complete as per drawing, specification and direction of engineer incharge. Make-Jaquar/American Standard/Kerovit Eqivalent 39 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approvedquality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not lessthan 45 gms 40 Providing and fixing of Long Braided Hos Pipe as per the approveddesign all complete as per drawing, specification and direction of engineer incharge. 41 Dismantling cemcnt concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by Engineer-in-chargc with in a distance of 60 mt. (200 feet) 42 Cement concrete with 4 cm (1.5) qauqe approved stone ballast, approved corrse sand and cemcnt in the proporlion ol4: 2 : I including suppty olnttmarcriats, labour and I & P etc. requircd for propcr comptelion or rhc 43 Cement concrete with 4 cm (1.5) qauqe approved stone ballast, approved corrse sand and cemcnt in the proporlion ol4: 2 : I including suppty olnttmarcriats, labour and I & P etc. requircd for propcr comptelion or rhc work. 44 Providing and laying kota stonertooring over 20 mm thick basc of cement mortar 1:4 (1 cement : 4 coarse sand) laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbingand polishing complete. 45 As ilem 730 above but for 150 mm dia PVC pipe 46 Consisling man hole with R.C.C top slab i 1:2:4 mix foundalion concrete 1:4:8 mix inside plaster 15 mm thick with cement mortar l:3 (cement and fine sand) with a floating coat ofneat cement and making channels in cement concrcte 1:2:4 mix finished smooth including curing and testing. 47 Marble polish work including repairing etc all comple.
