Tender For Shifting Of 33 Kv And 11 Kv Electrical Utilities And The Construction Of Power Lines Along Nh-4 From Km155.00 To Km181.00 (From The End Of Jarawa To Rangat) In The Baratang And Rangat Feeder Areas Of Middle Andaman, In The Ut Of A And N Is, Puram-Andaman And Nicobar Islands

TDR : 48520710

Tender Notice
Corrigendum Details
BOQ

Expired

Puram , Andaman And Nicobar Islands

Tender Brief : Corrigendum : Tender For Shifting Of 33 Kv And 11 Kv Electrical Utilities And The Construction Of Power Lines Along Nh-4 From Km155.00 To Km181.00 (From The End Of Jarawa To Rangat) In The Baratang And Rangat Feeder Areas Of Middle Andaman, In The Ut Of A And N Is

Document Fees
₹ 11800 /-

EMD
₹ 1856268.0 /-

Tender Value
₹ 9.28 Crore /-

Submission Date
17-04-2025

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	15-04-2025	CORRIGENDUM-1	Date	17-04-2025

Name of Work: Shifting of 33 kV and 11 kV electrical utilities and construction of power lines from 155+000 km to 181+000 km of NH-4 in the Baratang and Rangat feeder areas of Middle Andaman., in the Union Territory of Andaman and Nicobar Islands on percentage rate basis in FY 2024-25.

Sl. No.	Item Description
1	33KV single core 300sqmm , aluminium,round wire armoured XLPE UG cable FRLS
2	Straight through joint for cables 2 nos for single core (compound)
3	Route indicator
4	Warning tape
5	Cable termintation kits (Indoor/outdoor)
6	Excavation of any type of soil including laterite soil
7	Back filling of available excavated earth
8	Sand for cushioning of HT under ground cables
9	Mechanical transport 30kms of sand
10	Head load 100mtrs of sand
11	GI pipe 150mm dia with required no of collars for road crossing including termination points
12	RCC protective cover of size (300mm width x 300m length x 60mm thickness) for under ground cable.
13	Brick masonary chamber 900x900x1050)mm with RCC TOP slab, cast iron cover in CI Frame (31kg) after 500mtrs
14	Earthing electrode with B.F.C for 01 no earthing
15	Reinstallments of roads (1mx0.7mx0.2m)=14cums
16	33 KV 1 core 300 sqmm A I conductor , XLPE , insulated armored cable (From the RMU to receiving substation) with 33 KV MU:Outdoor type RMU SF 6 insulated, Extensible type, at 33 KV system voltage and breaking capacity 25 KA for 1 sec With SF 6 circuit breaker/VCB self powered with O/C+E/F Relay system comprising ofa) 33 KV, 630 A Motorised isolators Including earthing swatches with making capacity 62.5 KA , having mechanical on/off b) 33 KV 200 AMotorised spring operated circuit Breakers with earthing switchesc) CU bus - Bar of 630 A Ratingd) 1 no Numerical aux, Self powered relay having non directional O/C And E/F Protection for each CB feeder. e) Incoming isolators should have FPI With electrical Reset facilityf) All necessary potential free contacts for indications relevant to RMU monitoring and control g) Capacitor voltage Divider serving line - line cable indicators in each breaker and isolator. 2) 33 KV single core in door terminating kits 3) 33 KV single core outdoor terminating kits 4) Rout marker 5) Warming tape6) Cable termination kits (Indoor/Outdoor) 7) Excavation of any type of soil including hard laterite soil8) Backfilling of available excavated earth9) Sand for cushioning of HT underground cables10) Mechanical transport of sand11) Head load 100 mtrs of sand12) GI pipe 150 mm dia With required no of collers For road crossing including termination points13) RCC protective cover off size 300 mm (Width) x 300 mm (Length) x 60 mm (Thickness) For underground cable14) Brick masonry chamber (900 X 900 X 1050) mm With RCC15) Top slab cast iron cover in CI frame (38 kg) 16) Earthing complete by GI pipe 40 mm , 3 mtr Long through GI strip (25x3) mm. 17) Reinstatement of roads (100 m x 0.7 m x 0.2 m) = 14 cums.
17	Support GI PIPE POLE OF 11 MTRS
18	Double GI Pipe Pole Structure at Disc Points on 10 meters pole.
19	support structures G1 Channelfor 11/3kVHT (l00x50x6mm)1. 7mtrs
20	GI channelfor LT single cross ams (75x40x6mm)1.5 mtrs
21	GI Channel for HT pole cross bracing ( 75x40x6mm)
22	Gl flat for Clamps (80/l00mmx8mm}
23	GI clamps (75x8mm)
24	GI Nul bolt16mm (5/8) 100mm
25	GI Nul bolt16mm (5/8) 800mm
26	GI Nul bolt16mm (5/8) 65mm
27	GIwasher 6mm (5/8)
28	Earthing set complete
29	GI stay set complete HT
30	Anti Climbing Devices
31	Foundation materials for muffins;
32	Conductors and condutors Accessories AAA Conductor80Sq.mm 7/3.81 mm
33	AA I conductors 7/2.5 mm
34	PG clamps
35	Danger plates
36	Insulators and insulating materials 33KVPinInsulator(PorcelainType) with pin as per ISS
37	33kv Disc insulator (porcelain type) with hard ware as per ISS
38	LT insulator(porcelain type) as per ISS
39	LT Shackle insulator with hardware
40	PVC Twice Core Service wire 8/10 mm
41	Out door11KV HT Metering ArrangementwithCT 150/5A andPT 11KV/10V along with pre - programmedMeter
42	G.I Pipe pole 11 meters
43	G.l. Channel (75x40x40x6mm)
44	G.1 Channel (l00x50x50x6mm)
45	GI angel to support transformer channeldistribution 8ox (50x50x6)
46	G.l. clamp
47	G.l. bolts & Nuts & Washer16 mm (5/8) 100
48	G.I. strip 25x3 mm
49	11kVdisc insulator (porcelaintype) withpin asperISS
50	11 KV strain clamps complete with ball sleeved andsocket eye
51	11KV lightning arrester
52	11KV, 200 amps Horn Gap DO fuse
53	1 IkV ABS set
54	LT distributionBox inclusive ofBusbar, cutouts,metering etc
55	DT installationon plinthmounted
56	Earthing electrode with black fillcompound
57	Foundationmaterials for MufFing
58	GI pipe pole 11meteres
59	GI Channel for double cross arm(100mmx50x6mm) 3 mtrs
60	GI clamp 75x8mm
61	GI Nut and bolt wiyh washer 16mm (5/8) 100mm
62	GI strip (25mmx3mm)
63	11kv ABS set
64	11KV LIGHTNING ARRESTOR
65	I I KV 200ampsHorn Gap DO fuse unit
66	33kv ABS set
67	33 KV LIGHTNING ARRESTOR
68	33KV, 200amps Horn Top Do fuse unit
69	Earthing electrode with back filling compund
70	LT distribution on plinth mounted with gaurding
71	DT installation on plinthmounted (pedestial) with gaurding
72	Foundation material for muffing
73	Support Double G.I. Pipe Pole (11 Mtrs.)
74	Support Fixtures G.I. Channel for 11/33KV HT Double Cross Arm(100x50x6 mm) 3 Mtrs.
75	G.I. Channel for LT SingleCross Arm(75x40x6 mm) 1.5 Mtrs.
76	G.I. Angle Channel for Cross Bracing (50x50x6mm) 3.5 Mtrs.
77	G.I. Clamp 80/100 x 8mm
78	G.I. Clamp 75 x 8 mm
79	Bolts & Nuts & washer(5/8)16 x100 mm, 16x80mm.16x65mm ,16x50mm, FulI Thread.
80	GI nuts and washers (5/8) 16 x100mm full thread
81	Earthing Set Complete
82	G.I. Stay Sets Complete HT
83	Anti-Climbing Device
84	Foundation Materials for Muffing
85	Conductor & ConductorAccessories AAA Conductor 7/3.18 mm
86	AAA Conductor 7/2.5 mm
87	P G.Clamps
88	Danger Plate
89	Insulator & Insulator Accessories 11 KV Disc Insulator (Porcelain Type) with pin as per ISS
90	11 KV Strain Clamps Complete with ball sleeved and socket eye
91	33 KV Disc Insulator (Porcelain Type)with pin as per ISS.
92	33 KV Strain Clamps Complete with ball sleeved and socl‹et eye.
93	LT Disc Insulator (Porcelain Type) with pin as per ISS
94	LT Shackle Insulator with Hardware
95	PVC Twin Core Service wire 8/10 Sqmm
96	Door 11KV HTMetering Arrangement (Rangat Feeder) with CT 15u/5A and PT 11kV/110V alone with Pre Programmed Meter at Water
97	G.I.Pipe Pole 8 mtrs.
98	G.I.Channel for Cross Arm (75x40x6mm)
99	G.I.Clamp 75x8 mm
100	G.I.Bolts & Nuts & Washer 16 mm (5/8)x100 mm
101	Earthing Set Complete
102	G.I.Stay Sets Complete
103	Danger Plate
104	AAA Conductor 7/2.5 mm
105	LT Disc Insulator (Porcelain Type) with pin as per ISS
106	Guy Insulator
107	Foundation Materials for Muffing
108	PVC Twin core Service Wire 8/10 sqmm
109	GI PIPE POLE OF 11 MTRS
110	GICHANNEL for channel for double cross arm (100x50x6mm) 3mtrs
111	GI clamp 75x8 mm
112	GI bolts and nuts and washers 16mm (5/8)x100mm
113	GIstrip 25x3mm
114	11kv ABS SET
115	11KV lightning arrestor
116	11KV, 200Amps , horn gap, D.O. Fuse unit
117	33kvabs set
118	33kv lightning arrestor
119	33KV, 200Amps , horn gap, D.O. Fuse unit
120	Earthing electrode with back fill compund
121	Foundation materials for muffing
122	G. I. Pipe Pole 11 Mtrs.
123	G. I. Channel ( 75x40x40x6mm)
124	G. I. Channel ( 100x50x50x6mm)
125	G.I Angle to support Transformer Channel &Distribution Box (50x50x6)
126	G. I. Clamp 75x8 mm
127	G. I. Bolts & Nuts & Washer 16mm (5/8)x100 mm
128	G.I. Strip 25x3 mm
129	11 KV Disc Insulator (Porcelain Type)with pin as per ISS
130	11 KV Strain Clamps Complete with ball sleeved and socket eye
131	11 KV Lightning Arrestor
132	11 KV, 200 Amps. Horn Gap D.O.Fuse unit
133	11KV ABS Set
134	LT Distribution Box Inclusive of Busbar, Cout Out,Metering etc.
135	DT Installation on Plinth Mounted (Pedestal) with Guarding.
136	Earthing Electrode with Back fill compound
137	Foundation materials for muffing

Also Visit

Tenders

Andaman And Nicobar Islands Tenders

Electrical Industry Tenders

Electrical Boxes Tenders

Feeder Pillar Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Shifting Of 33 Kv And 11 Kv Electrical Utilities And The Construction Of Power Lines Along Nh-4 From Km155.00 To Km181.00 (From The End Of Jarawa To Rangat) In The Baratang And Rangat Feeder Areas Of Middle Andaman, In The Ut Of A And N Is, Puram-Andaman And Nicobar Islands

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Shifting Of 33 Kv And 11 Kv Electrical Utilities And The Construction Of Power Lines Along Nh-4 From Km155.00 To Km181.00 (From The End Of Jarawa To Rangat) In The Baratang And Rangat Feeder Areas Of Middle Andaman, In The Ut Of A And N Is, Puram-Andaman And Nicobar Islands

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us