|
| 1 | Earthwork in excavation by mechanical means( Hydraulic excavator)/ manual means in foundation trenches or drains( not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus exacavated soil as directed, within a lead of 50m. 2.8.1 All Kinds of soil |
| 2 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. 16.78.1 with material conforming to Grade-I (size range 75mm to 0.075 mm) having CBR Value-30) |
| 3 | Providing and laying cement concrete in retaing walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, butteresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five levels, excluding the cost of centering, shuttering and finishing:4.2.2 1:1.5:3 ( 1 cement : 1.5 coarse sand ( zoneIII) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived fro natural sources ). |
| 4 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinthin:6.2.1 Cement Mortar 1:4 (1cement: 4 coarse sand). |
| 5 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 6 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed ofsand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.16.91.2 80 mm thick C.C. paver block ofM-35 grade with approved colour, design&pattern. |
| 7 | Reinforced Cement concrete work in arches, archribs, domes , vaults , shells , folded plate and roofs having slope more than 15 deg up to floor five level excluding the cost of centering , shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement1.5 coarse sand (zone III) derived from natural sources : 3 graded stone agregate 20 mm nominal size derived fro natural sources ). |
| 8 | Rein forced cement concrete worik in beams, suspended floors, roofshaving slopeup to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1cement:1.5coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20mm nominal size derived from natural sources). |
| 9 | Reinforced concrete work in walls (any thickness), including attached pilasters , buttresses, plinth and string courses , fillets, columns, pillars,piers,, abutments, posts and struts etc. above plinth level up to floor five level , excludig the cost of centering , shuttering , fininshing ,and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand ( zoneIII) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived fro natural sources ). |
| 10 | Centering and shuttering including strutting, propping etc.and removal of form for Foundations, footings, bases of columns, tec for mass concrete |
| 11 | Centering and shuttering including strutting, propping etc.and removal of form for suspended floors , roofs , landings, balconies and access platform |
| 12 | Centering and shuttering including strutting, propping etc.and removal of form for Columns , Pillars , piers , abutments ,posts and struts |
| 13 | Centering and shuttering including strutting, propping etc.and removal of form for Cornices and mouldings |
| 14 | Extra for additional in centering, shuttering where ever required with adequate bracing , propping etch including cost of de-shuttering and decentering at all levels , over a height of 3.5 m , for every additional height of 1 metre or part thereof ( Plan area to be measured) Suspended floors, roofs, landings, beams and balconies (Plan area to be measured) |
| 15 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel & medium tensile steel bars |
| 16 | 12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) |
| 17 | Providing and applying white cement based putty of average thickness 1 mm,of approved brand and manufacturer, over the plastered wall surface ofcement 78.35 to prepare the surface even and smooth complete. |
| 18 | Finishing walls with acrylic smooth exterior paint of required shades :13.46.1 New work (Two or more coat applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/4010sqm) |
| 19 | Providing and fixing M.S. Tubular frames fordoors, windows, ventilators andcupboardwithrectangular/L-Typesections,madeof1.60mmthick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying priming coat of approved steel primer. |
| 20 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished ,machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), Joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. 8.2.2 Granite stones lab of colour black, Cherry/Ruby red8.2.2.2 Area of slab over 0.50 sqm |
