|
| 1 | Supplying, Installation, Testing, and Commisioning of 45 Watt LED street light (IP 66, IK07) having corrosion free High pressure die cast aluminum housing, High effieciency secondary optics / lenses with toughened glass front cover. Operating Voltage b/w 160 to 270 V, Power Factor ≥ 0.95, THD ≤ 10 %, CCT3500 K to 5700 K, Luminaire efficacy ≥ 120 lumens / watt, LED driver efficiency > 85 %, CRI ≥70. Surge protection - 4 KV integralwith over - voltage protection. (Fittings required LM - 80 certificates) *Minimum 3 year Warranty period |
| 2 | Supplying, Installation, Testing, and Commisiong of45 Watt Post Top Lantern LED (IP66, IK07), Having corrosion free High pressure die cast aluminum housing, Operating voltage b/w 160 to 270 V, Power Factor ≥ 0.9, THD ≤ 10 %, CCT3500 K to 5700 K, Luminaire efficacy ≥ 100 lumens / watt, LED driver efficiency > 85 %, CRI ≥70. Surge protection - 4KV integral with over - voltage protection. (Fittings required LM - 80 certificates) *Minimum 3 year Warranty period. |
| 3 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 4 | (a) Up to 35 sq. mm |
| 5 | Painting of Light Pole in installed position with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint.Including scraping and cleaning of surface as required. |
| 6 | Supplying and erecting of 4 core 10 Sq. mm XLPEarmoured cable multistrand / Solid Aluminium conductor for1.1 KV. to be laidon wall with necessary clamps or in existing trench/ pipe. |
| 7 | Providing and erecting street light pole bracket comprising main B Class MS pipe of require outside dia. complete with suitable B Class M.S. sleeve tubing suitable for required size pole top having sufficient fasteners for fixing the brackets and having spread of sufficient length with suitable rise as per site condition & suitable welded stiffener reducer and nipple with check nut complete painted with one coat of Red oxide / PU base primer and two coats of Aluminium/PU paint. paint with following nos of arms. Sample should be approved by the Engineer In-charge. |
| 8 | [A] Single Arm Bracket 1 Mtr |
| 9 | [B] Double Arm Bracket 1 Mtr |
| 10 | Providing & erecting approved make street light junction box compression moulded from SMC (thermoset plastic) vertical sliding cover having locking with square head stud loop in / loop out in built terminal suitable for four core cable, waterproof of I.P. 54 protected with clamp or bolt nut & earth bolt of following size. |
| 11 | (A) 200mm x 127mm x 83 mm |
| 12 | (B) 250mm x 194mm x 99 mm |
| 13 | Providing, erecting, fabricating the M.S. structure as per requirement on site incorporating proper size of M.S. angles square/round/flats complete with cutting, welding, grinding & finishing duly painted with one coat of red oxidewith erection on site as per direction of engineer in charge. |
| 14 | Supplying and erecting of 3 core 1.5 Sq. mm XLPEunarmoured copper cable multistrand / Solid Aluminium conductor for1.1 KV. to be laidon wall with necessary clamps or in existing trench/ pipe. |
