|
| 1 | Construction of Tube-well upto 100 Meter depth and above in alltype of rocks by DTH system and over burden to accommodatecasing pipe of following sizes in all types of soils and over burden including lowering of casing pipes but excluding cost of casing pipesas per IS : 2800 (Part I & II) 1979 specifications. The work would becompleted after obtaining sand free water. The tube well shouldhave a throughout bore as per nominal dia of casing pipe20.1.4 200 mm dia Nominal bore metre 1,407.00 |
| 2 | Construction of tube-well from ground levels to accommodatehousing and assembly pipe of following sizes in all types of alluvium strata by percussion/ rotary drilling method and with gravel as per IS:4097-1967 and packing as per IS:2800 (Part I -& II) 1979 as amended upto date (the work includes the cost of gravel & its primary packing and packing during development, lowering of housing & strainer assembly pipes, with supply and wrapping of coirrope, wherever necessary for arresting fine sand particles. The workwill not include cost of housing pipe and strainer pipe assembly anddevelopment work, but work would be completed after obtainingsand free water).Upto 100 Meter depth20.2.1.2 Nominal bore 200 mm dia metre 1,767.00 |
| 3 | 20.3 Development of tube well as per IS specification using suitablecompressor to give sand free water for required yield of the gravelpacked tube well. hour 610.00 |
| 4 | Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/1992)of grade Fe410 of following nominal bore sizes at site of work20.4.4 200 mm dia metre 1,839.00 |
| 5 | 20.10 Providing & lowering of G.I. flange pipe B Class including rubberwasher and nuts of 8 mm dia complete in all respect. 20.10.1 50 mm dia metre 656.00 |
| 6 | 150 mm diameter Submersible pump shall have following HPRating, phase, Head range, Discharge range respectively12.5 HP, 3-Ø, (78 - 126)Mtr, (395-245) LPM |
| 7 | 20.9 Installation of submersible motor pump set in tube-well/open wellcomplete (labour charges only) including transportation of tripod,chain pulley block & any other material required for loweringpurpose. each 5,468.00 |
| 8 | P/Laying ISI marked P.V.C. insulated submersible cable confirmingto(IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire shouldbe made from 99.90 % purity copper, stranding in acc. toIS:8130/IEC 60228 for lower watt loss , oxygen free for lesschances of oxidization, insulation PVC type A/C/D , flame retardantas per IS 10810-53, better amperage rating as per IS:3961 part 5,existing pipe / open trench / Cable tray / on surface including makingconnection etc. as required. For additional technical parameters ofproduct / work refer Annexure \"A\" attached with this BSR53.7.5 10.0 Sq.mm 3 core flat / Round Mtr. 502.00 |
| 9 | Providing & Laying of Polypropylene rope Confirming to IS:5175 forsubmersible pump of following sizes. complete in all respect. All asper pre approved by Engineer in-charge. For additional technicalparameters of products/ work , refer Annexure \"A\" attached withthis BSR .70.3.2 16mm (suitable above 50mm & up to 75mm OD pipe) Mtr. 55.00 |
| 10 | Providing and fixing gun metal non- return valve of approved quality (screwed end) :34.19.1 25 mm nominal bore 34.19.1.1 Horizontal each 876.00 |
| 11 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P -I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouringof cables, Inner / outer sheath confirming to IS:5831 in existing RCC/ Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of followingsize. OEM must have it\"s own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additionaltechnical parameters of product / work refer Annexure \"A\" attached with this BSR25.0 Sq. mm60.2.5.2 3 core Mtr 250.00 |
| 12 | SITC of Contactor OEM Fabricated DOL/Star-Delta Starter panel with switchgear selection as per Type-2 Cordinatiom Chart andmade out from 1.6 mm thick powder coated CRCA sheet, enclosurecomprising of over load protection relay, short circuit & singlephasing protection, Illuminated ON / OFF push buttons, ammeter,voltmeter, indicating lamps etc. suitable for following rating motorscomplete in all respect. All as per pre approved by Engineer incharge. For additional technical parameters of products/ work ,refer Annexure \"A\" attached with this BSR12.5 HP to 15.0 HP ( Star / Delta starter ) Each 22,254.00 |
| 13 | Supply and fixing of tube well cover of M.S. sheet (6mm thick) withnuts and bolts complete for casing size 20.7.4 200 mm dia each 301.00 |
