|
| 1 | Excavation of foundation in hard soil with50 m initial lead and1.5m initial lift including rough dressingand spreading outside foundation. |
| 2 | Spreading sand in foundation and plinth including watering and ramming. |
| 3 | Cement Concrete 1:4:8 using 40mm size HG crusher broken metalin F&P . |
| 4 | 2.5 cm thick A.S Flooring in 1:2:4 floors using 12 mm chips all complete as per direction of EIC. |
| 5 | Cement Concrete M20 grade using 20 mm and down grade black crusher broken hard granite chips complete as per direction of Engg-in-Charge . |
| 6 | RCC M-20 grade using 20 mm and down grade black crusher broken hard granite chips including hoisting, laying , rigid and smoothcentering and shuttering including false work, dismantling after21 days of casting etc complete. |
| 7 | Footing & Pedestal |
| 8 | Columns |
| 9 | Plinth Beam : (0.25mt x 0.25mt) |
| 10 | Lintel beam |
| 11 | Chajja |
| 12 | Roof Slab Beam : (0.25mt x 0.25mt) |
| 13 | Roof Slab |
| 14 | Supplying HYSD Bar reinforcement incl. cutting, bending, binding, laying & placing grills for RCC work including binding wire, centering & shuttering etc all complete. |
| 15 | Supplying , spreding and consoliding moorum by proper watering and rolling including cost , conveyance and royalty of moorum copmplete as per direction of Engg-in-Charge . |
| 16 | Brick work with Fly Ash Bricks having crushing strength 75 kg/sq.cm in c.m. 1:6 in F & P including cost conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge . |
| 17 | F & P |
| 18 | Supper structure |
| 19 | Laying of pre-cast RCC Rings @ 1 mt.dia for safety tank & soak pit |
| 20 | Rings @ 1 mt dia |
| 21 | One Number cover |
| 22 | 12mm. thick cementplaster in c.m. 1:6 over R.C.C work or brick masonryincluding cost conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge . |
| 23 | 6mm. thick cement plaster (1:4) to R.C.C. surfaces finished smooth including closed deep chipping and slury treatment, cost , conveyance and royality of materials curingetc. complete as per direction of Engg-in-Charge . |
| 24 | 16 mm thick cement Plastering in 1:6 over new brick work inside area etc. complete as per direction of EIC. |
| 25 | Cement Punning |
| 26 | Cement washing one coat over plaster work |
| 27 | Finishing to walls with two coats weather coatover one coat primer after finishing wall surface of wall with cement based wall putty (water based) and weather coat paint of approved brand and approved colour including cleaning the surfacewith cost, conveyance, royalty taxes of all materials labour T&P and scaffolding as required for the work and as per specification and direction of Engineer-in-charge. |
| 28 | Painting 1 coat with approved primer to wall including cost of material & labour |
| 29 | Distempering two coats with any shade including cost of material & labour |
| 30 | Fixing of ceramicfloor tiles in floors , dado & skirting in 1:3 Cement mortar etc. complete in all respect as per direction of EIC. |
| 31 | Fixing of Glazed wall tiles in floors , dado & skirting in 1:3 Cement mortar etc. complete in all respect as per direction of EIC. |
| 32 | Cutting holes through existing brickwork incl. making good the same in C.M.1:4 taking G.I. Pipes & fittings P.V,C pipes and fittings all complete as per direction of Engineer In Charge |
| 33 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & |
| 34 | PVC Waste pipe including Waste including all materials and labourscompleteas per specificationetc. complete as per direction of Engg. in charge. |
| 35 | FixingWash Basinwith hole for pillar type with cast iron or M S bracket painted white including cutting holes in the walls and making good the damagesetc. complete as |
| 36 | Supplying fitting and fixing of plastic polished white Bib cock/ water tapcomplete |
| 37 | Supplying fitting and fixing of plastic polished white Bib cock/ water tapcomplete |
| 38 | Fixing of Brass angle stop cock polished bright of the following nominal size specification etc. complete as per direction of Engineer In Charge |
| 39 | Fixing of plasticfull way valve(20mm) of the following nominal size with wheel as specification etc. all completeas per direction of Engineer In Charge ( UPVC ballvalve sch -80) |
| 40 | Fixing of standard size Chromimum plated Towel Rall complete with Chromimum plated bracket fixed to wood/PVC plugs with Chromimum plated brass screw complete as per specification etc. all completeas per direction of Engineer In Charge |
| 41 | Fixing of standard size Chromimum plated brass soap disk complete with Chromimum plated bracket fixed to wood/PVC plugs with Chromimum plated brass screw complete as per specification etc. all completeas per direction of Engineer In Charge |
| 42 | Fixing of 600mmx450mm Bevelled Edge Mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with chromimum plated brass screw and washers as per specificationetc. complete as per direction of Engg. in charge. |
| 43 | Supplying fitting fixing of FRP door etc. complete in all respect as per direction of EIC. |
| 44 | Recessed wiring to Light point / Exhaust fan point for working shed , store Room & Toilet complete as per direction of EIC. |
| 45 | Supplying & Fixing of Ceiling Rosefor working shed & store Room complete as per direction of EIC. |
| 46 | 3 Layer white rotational moulded cylinderical vertical water storage tank (ISI marked). |
| 47 | M.S.Panneled Window double leaved shutter with M.S.frame & Grill overall size including frame:- 1200mm (H) x 1200mm (W) made out of the following materials conforming to relevant Indian Standard specifications. Frame :- 35x35x6mm M.S.angle, Shutter style :- Top & Bottom rail 25x25x3mm M.S.angle, Door panel :- 1.0mm C.R.Sheet. Panel stiffener covering width of each leaf :- 19x5mm M.S.Flat 2nos on each leaf. Hinges size :- 100mm 4nos (2nos each side) bought out as per ISS. Hold fast :- 35 x 35x 6mm M.S.Angle 100mm length bifurcated at the tip 2nos one each side. Handle :- 19x5mm M.S.Flat fabricated (inside) 2nos. Tower bolt :- 4nos bought out as per ISS. Horizontal Grills :- 12mm M.S.Round at 100mm spacing. Approximate weight :-39Kgs |
| 48 | M.S.Panneled Door single leaved shutter with M.S.frame overall size including frame:- 2100mm (H) x 1200mm (W) made out of the following materials conforming to relevant Indian Standard specifications. Frame :- 30x30x5mm M.S.angle, Shutter style :- Top & Bottom rail 25x25x3mm M.S.angle, Door panel :- 1.0mm C.R.Sheet. Panel stiffener covering width ofleaf :- 19x5mm M.S.Flat 3nos. Hinges size :- 100mm 3nos bought out as per ISS. Hold fast :- 30 x 30x 5mm M.S.Angle 150mm length bifurcated at the tip 3nos on each side. Handle :- 19x5mm M.S.Flat fabricated 2nos. Aldrop :- 2nos bought out as per ISS. Tower bolt :- 2nos bought out as per ISS. Approximate weight :- 36.50Kgs |
