|
| 1 | Sound System |
| 2 | Subwoofer 2000W or Higher Suspended Line Array Subwoofer Modular, portable line array subwooferDual 15-inch or higher woofer drivesFrequency range: 32 Hz–250 Hz or better136 dB SPL or better Material - Plywood |
| 3 | Array Speakers4x Array each side, each box should be 1000W Dual 8-inch LF drivers and 3-inch titanium compression driver or higherFrequency range: 80 Hz–20 kHz or better110° horizontal x 12° (variable) vertical dispersion or better136 dB SPL or betterVariable interbox angles |
| 4 | Delay SpeakesWall mountable Box Speaker each side, each box should be 375W Dual 8-inch LF drivers and 25 mm (1 in) exit compression driver, 38 mm (1.5 in) voice coil or higher.Frequency range: 80 Hz–20 kHz or better120 dB SPL or better |
| 5 | Stage Monitor Powered Monitor Speaker: 1,300W Peak / 650W RMS or better12-inch woofer, 1 compression driver or betterFrequency response: 50 Hz–20 kHz; 60 Hz–20 kHz or betterMax SPL: 127 dB or betterDispersion: 100° H x 60° V or betterAudio I/Os: 2 XLR Combo, 1 XLR passthroughAdvanced dbx DSP: Automatic Feedback Suppression, ducking, 100ms speaker delay, parametric EQBuilt-in 3-channel digital mixerBacklit color LCD screenTwo ergonomic handles simplify transportBuilt-in pole mount and optional Universal Yoke Mount expand system configuration options |
| 6 | Amplifiers Suitable 2Ch Power Amplifier for driving Sub and all other Speakers except Stage monitor. The total wattage of the Amplifiers not less than 7000W in each ChanelAmplifier should support DSP – On-board Digital Signal Processor in each amplifier allows for custom configuration and includes these integrated features: Input Router Input Delay – Up to 1000msInput Parametric EQ – 8 bandCrossoverOutput Parametric EQ – 8 bandOutput Delay – Up to 100msLevelMAX™ LimiterDigital Signal Processing - 96kHz, 32-bit floating pointTotal Harmonic Distortion (at full rated power, from 20Hz - 20kHz) - 0.35%Analog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz- >104dBIntermodulation Distortion (60Hz and 7kHz at 4:1, from - 30dB to full rated power) - ≤0.35%DC Output Offset (with inputs shorted) - ±10mVInput Impedance (Nominally balanced, nominally unbalanced) - 20 kΩ balanced, 10 kΩ unblancedMaximum Input Level (Low Amp Gain Mode) - +20dBUDamping Factor (20Hz to 100Hz - >1000Crosstalk (below rated power, 20Hz to 1kHz) - >80dBCommon Mode Rejection (20Hz to 1kHz, typical) - >70dBRequired AC Mains - 100V – 240V~ 50/60HCooling - Continuously variable speed forced air, front to back airflow |
| 7 | 24 Channel Mixer 24 simultaneous inputs (10 combo ¼” TRS/XLR, 10 XLR, 2 line level, 2 digital)4-band parametric EQ, high-pass filter, compressor, de-esser, and noise gate on input channels31-band graphic EQ, noise gate, compressor, and dbx® AFS2 Automatic Feedback Suppression on all outputsReal-time frequency analyzer (RTA) on inputs and outputsCompatible with Mac/PC DAWs and other music softwareBuilt-in dual-band Wi-Fi eliminates the need for a router to provides a reliable connection to up to 10 mobile devicesControl from iOS, Android, Windows, Mac OS and Linux browsers without installing additional appsRecord and mix with the warmth of 20 professional-quality Studer-designed preampsDbx compression and iconic Lexicon reverb and delay processing2 channels of DigiTech guitar amp modellingDual-path, redundant multi-track recording of all 24 inputs to USB drive and connected Mac/PCStandard 19” rackmount design |
| 8 | Gooseneck Mic Gooseneck Length – 18 inch (45.7cm) LengthInterchangeable cartridge Locking flange mount for permanently securing microphoneSnap-fit foam windscreenShock mount should provide minimum 20dB isolation from surface vibration noiseBalanced, transformerless output for increased immunity to noise over long cable runs |
| 9 | Wired Handheld MicrophoneTransducer Type – DynamicPolar Pattern - Super CardioidSensitivity (at 1kHz) - -52dB ±3dBNominal Impedance - 600 ΩConnector - 3-pin XLR male |
| 10 | TabletRam – 4Gb or HigherStorage – 64Gb or HigherOS – Android Original |
| 11 | Array Frame for Suspends Line Array Units and Subwoofer |
| 12 | Wall Mount U Type Bracket Delay Speaker |
| 13 | 17U Floor Standing Equipment Rack with 6/16A PDU with MCB 2nos, Full size shelf and Cooling Fans and all other accessories |
| 14 | Shielded Microphone Cable |
| 15 | 2.5 Sqmm 2 Core Speaker Cable |
| 16 | 4 Sqmm 3 Core Power Cable |
| 17 | 20A Industrial Plug and Sockets |
| 18 | 25mm PVC Conduit |
| 19 | Other items including Interconnecting Cables and Connectors for successful completion of Project |
| 20 | Installation, Testing and Commissioning Charges including Speaker Cabling |
