Tender For Annual Rate Contract For Cutting Threading, Turning And Repairing, Replacement Of Valves, Tees And Other Works Under Sub Div. Bajju, Kolayat-Rajasthan
TDR : 48501455
Tender Notice
BOQ
Expired
Kolayat
Rajasthan
Tender For Annual Rate Contract For Cutting Threading, Turning And Repairing, Replacement Of Valves, Tees And Other Works Under Sub Div. Bajju
Name of Work : - Annual rate contract for cutting threading, turning and repairing, replacement of valves, tees and other works Under Sub Div. Bajju
Sl. No.
Item Description
1
PART A :-
2
Turning of various sizes of CID Joints Class- 10/ 15 Complete set (Labour Charges), The Joints will be supplied by the Junior Engineer concern of Department and carting to workshop and after turning of these joints, firm is liable to transport upto Junior Engineer concern\"s store own his cost.
3
80 mm dia
4
100 mm dia
5
125 mm dia
6
150 mm dia
7
200 mm dia
8
250 mm dia
9
Providing, Fabrication of Mild SteelPlane Ended/ Flanged Specials like Tees, Bends, Reducers, Enlargers, Plugs, Tail Pieces and Blank Flange made from MS pipes, MS sheet strip and MS Sheet of required sizes by welding, cutting and treading as per site conditions and as directed by the Engineer- In- Charge complete in all respect.
10
Making of GI Assembly pipe for various sizes including threading, tightening, welding of flange and welding with MS Patti, holes and cable grove making as per required length of 3.00 M/ 6.00 M (Pipse and flangse shall be providedand carting these to workshop by the the department). Length of MS strip will be 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flange. Holes in the flanged will be standard size and above 12 mm dia. in size. After tightening the pipe and flanged, welding will be done at junction of flange and pipe complete in all respect. After preparing of Assembly Pipes, the firm is liable to transport these toconcern\"s divisional store own his cost.
11
65 mm
12
80 mm
13
Supplying ofMS Rods and Chuck Nut (Complete Set) for different sizes of sluice valveand should be supplied as according to size of Check Nut including material for the following sizes.
14
Sluice Valve Size 80mm
15
Sluice Valve Size 100mm
16
Sluice Valve Size 125mm
17
Sluice Valve Size 150mm
18
Sluice Valve Size 200mm
19
Sluice Valve Size 250mm
20
Making Direct Pump Piece with heavy duty pipes (Class- B) and flange (as per table- D)including cutting of pipe, threading welding and MS strip for length - 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flanged will be standard size and above 15 mm in size. After tightening the pipe and flanged, welding will be done at junctin of flange and pipe complete in all respect including cost of material. The Length of Direct Pump Piece will be 30 cm (300 mm).
21
2\" dia. Size (50 mm)
22
2 ½\" size (65 mm)
23
Making Reducer Pump Piece with heavy duty pipes (Class- B) and flange (as per table- D)including cutting of pipe, threading welding and MS strip for length - 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flange will be standard size and above 15 mm dia. in size. After tightening the pipe and flanged, welding will be done at junctin of flange and pipe complete in all respect including cost of material (Both the larger and smaller pipe will have equal length making reducer). The Total Length of Reducer Pump Piece will be 30 cm (300 mm).
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
