|
| 1 | Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50M, and lead upto 30M, and including filling watering and ramming of excavated earth into the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-in-charge upto a distance of 30M from the foundation trenches (S.I. No. 251(a)] |
| 2 | E/W in filling in ordinary soil all comp of work |
| 3 | P/L OF CC 1:6:12 WITH CEMENT,SAND,4CM SIZE B.BALLAST ALL COMP. OF WORK. |
| 4 | R.C.C. works with cement approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:2:4 in slab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I., binding wireand including ncecessary centering and shuttering etc. and supply of all materials labour, tools & plants etc. require for proper completion of the work, including cost of binding wire. The rate excludes making of drip course which shall be paid extra. (SIN No. 284) |
| 5 | M.S. (for steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks and authorized overlapping shall be measured and including cost of binding wire. (SIN No 504) |
| 6 | Cement Concrete with 2 cm gauge approved graded stoneee grit, coarse sand and cement in the proportion of 4:2:1, including supply of all materials, labour, tools & plants etc required for proper completion of the work As per direction of E/I.[S.I No. 279(a)] |
| 7 | M-150 brick work in 1:4 one cement and three course saind of 1.25 F.M. mortar in foundation and plinth incluing supply of all materials labour, T & P etc. required for proper complition of the work S.I. No. 307 (a) |
| 8 | 12 mm thick C/P 1:4 cament and course sand SIN.584(A) |
| 9 | Supply & Fixing of factory wired integral LED Flood Lights (warm white) luminaries with die cast aluminium housing built with driver set, Make of Lights: Philips, Crompton, Babaj or any other make equivalent, suitable for 100 Watt confirming to IP66protection complete in all respect. CAT-AA. |
| 10 | Supply and laying of 10 sq.mm 2 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 11 | Supply and wiring of submains with 2 nos. 2.5 sq mm & with 1 no earth wire of 1.5 sq mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete, including supply of all material, labour and T & P etc. required for proper completion of the work as directed by Engineer in charge. |
| 12 | Supply and Fixing of Automatic Algorithm based Street Light Switch of Load Capacity 5 KW for automatic working of the lights as per the directions of Engineer-in-charge. |
| 13 | Beautification work in raft design with stone work type. |
| 14 | S/F of 1 H.P. motor for lifting of water to tank all comp. of work. Cropmton make. |
| 15 | P/placing of 1000 Ltr. Storage pvc water tank |
| 16 | P/F water closed squatting pan (indian type W.C. pan) with 100mm sand cast iron P or S trap , 10 ltr low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS ; 7231 , with all fittings and Fitting Orissa pattern W.C. pan of size 580x440 mm Hindware or Equivalent with integral type foot rests. As 17.1.1 |
| 17 | P/F of 15 mm GI pipe with all accessorese |
| 18 | P/F of 20 mm GI pipe will all accessorese |
| 19 | P/F 15 mm nominal CP brass bib cock of approved quality conferming to IS 8931 |
| 20 | S/F C.P. stop cock concealed of standerd design and approved make conforming to IS : 8931 15 mm nominal bore. |
| 21 | Supply and fixing of 10 cm (4\") inernal dia P.V.C. down pipes Everest or Charminar make complete with bends with door at top and plain at bottom and grantings and including supply of necessary M.S. clamp 2.5 cm x 3 mm (1\"x1/8\") fixed to walls with and including supply of 15 cm (6\") long 6 mm (1/4\") dia nail all materials, labour and T&P etc. required for proper complection of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipes. (S.I. 730 a) |
| 22 | Supply and fixing of 7.5 cm (3\") internal dia P.V.C. down pipes Everest or Charminar make complete with bends with door at top and plain at bottom and grantings and including supply of necessary M.S. clamp 2.5 cm x 3 mm (1\"x1/8\") fixed to walls with and including supply of 15 cm (6\") long 6 mm (1/4\") dia nail all materials, labour and T&P etc. required for proper complection of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipes. (S.I. 730 b) |
| 23 | Wiring point for light with 1.5 sqm. m PVC insulated single core cable including PVC conduit pipe (S.I. No. 131B) |
| 24 | Wiring point for plug with 1.5 sqm. m PVC insulated single core cable including PVC conduit pipe (S.I. No. 131C) |
| 25 | P/F of white vitreous china wash basin including making all connections but excluding the cost of fittings size 550x400 mm |
| 26 | S/F of adjost fan all comp. of work. |
| 27 | S/F of ceiling fan of approved make khaitan,bajaj,crompton etc all comp. of work. |
| 28 | S/F of white vetreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standerd flush pipe and C.P. brass spreaders with brass union and one urinal basin with 5 ltr white P.V.C. automatic flushing cistern.all comp. of work. |
| 29 | S/F of 10 ltr (full flush) capacity white cistern. |
| 30 | P/F of 600x450 mm bevelled edge mirror of superior glass complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 31 | S/F 25 Watt CFL with approved quality as per direction of E/I (Market. Rate) |
| 32 | Screeding over leaky roofs with bitumen at 1 ltr per sqm. |
| 33 | 10 cm thick mud phuska damped mud mixed |
| 34 | S/fixing china white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour, to SIN. No. 628 |
| 35 | Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600X600 mm size in flooring and skirting with 1:3 approved cement and coarse sand mortar finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work as per direction of engineer-in- charge. [page 39 new item 05] |
| 36 | Painting roofs or other iron work in large areas with one coat priming and one coat of approved (above one sq. metre) paint (Britesh antesol or equivalent) including supply of all materials labour tools & plants etc required for proper completion of the work paint to be used ISI Marked. [page 41 new item 1(a)+2+3(3)] |
| 37 | Colours washing one coat using approved, colouring material buff blue, gray, or brown shade including supply of all materials, labour, tools & plants etc. required for proper completion of the work weather coat. |
| 38 | 110 m dia PVC pipe ISI mark 6kg/Pressure with couplers |
| 39 | 110 mm dia PVC Rib-stainer ISI mark 6 kg/ Pressure complete |
| 40 | dhaga gulla |
| 41 | Salvent cement |
| 42 | Supply of submersible PVC Roll |
| 43 | MS clip-110mm dia |
| 44 | Three core cable ISI mark |
| 45 | Supporting wire for holding |
| 46 | 1 H.P. submerisble motor pump set ISI mark 32 mm dia delivery |
| 47 | 1 H.P. ISI mark panel auto-cut |
| 48 | G.I. Redusig elbow- 32x25 mm dia |
| 49 | G.I. Long Nipple- 32 mm dia |
| 50 | G.I. Long Nipple- 25 mm dia |
| 51 | Boreing work for 160 mm dia casing pipeA- 0 to 48 mts |
| 52 | B-48 to 60 mts |
| 53 | Loring of 110mm dia PVC pipe in bore including all labour and T&P etc |
| 54 | Development of bore |
| 55 | Construction of T.W. chamber as per direction of Engineer in charge including |
| 56 | Add Cess 1% |
| 57 | Add [email protected]%= |