|
| 1 | Surface dressing of soft/loose soil n exc 15 CM deep at road side berm complete all as specified and directed |
| 2 | Removing of excavated surplus soil not exceeding 50m and depositing where as directed at a level not exceeding 1.5m above the staring point. |
| 3 | M&L for 75 mm spread thickness Moorum/ red bajri spread, rolled and consolidated to gradient and camber required |
| 4 | M&L Premix bituminous, macadam using paving bitumen grade VG-30 any penetration content @ 4% by weight of total mix laid /rolled and compacted to required gradient and camber with 8-10 tonne power roller and rolled to a uniform smooth surface (any consolidated thickness) complete all as specified and directed. |
| 5 | M&L for preparing existing black top surfaces of roadby brushing with wire brushes for removing cakedmud etc sweeping with brooms and finally fanning the cleaned surfaceswith gunny bags to remove all loose dirtetc complete all as specified anddirected. |
| 6 | M&L forapplying evenly a priming/tack coatwithwith RS I grade cationic emulsion @ 2.5 kg per 10 Sqm using mechanical sprayer on black top surface, complete all as specified anddirected. |
| 7 | M&L for Bituminous premix semi-dense asphaltic concrete (SDAC) 40 mmconsolidated thickness with 5.5% binder content of which (Paving bitument VG 30 @ 92 % and 8 % waste plastic) by wieght of total mix providing and layingwith mechanical paver and compactedwith 8 to 10 tonne capacity powerroller to required gradient and camber complete all as specifiedand directed. |
| 8 | M&L for Preparing bituminous surfaces of road and making 2.5mm thick centre lines, stops lines, dashes, arrows etc and the like n. exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with @ 5 Kg/Sqm and applying glass beads @ 300 gms/Sqm over painted surfacesspecial applicator machine aal as per manufacturers instruction complete all as specified and directed. |
| 9 | S & F in repairs of Road Studs two way reflective of100mm x 100mm x 26 mm ,plastic body Body weight 100 gmsReflective Panel of Amber, Red or Whiteprovided at site as permanufactuer\"s instructionscomplete all as directed. |
| 10 | S&F in repair of solar - powered environment friendly,LED based Road stud made of aluminium-aloy shell, 100% waterproof design according to IP 65, dimention of 125mmx 125mm x 25 mm (Shank 60mm), High efficiency Mono-crystallineSolar Panel 2.4V/0.3 watt, One Ni-Mh or NL-cd rechargeable battery (1.2V/1600 MA), Six super bright LEDs with 10,000 to 18,000mcd (Millicandela), View distance : upto 1000 Meters , Flash rate : 2Hz,Bearable Weight : 10 Tons approx, working time for 3 to 4 days provided at site as per manufacturer\"s instructions. |
| 11 | Material and labour forold size sub class B Bricks, straight or curved on plan exc 6m men radius built in cement mortar (1:6) havising comoressivestrenght notless than 75 kg/Sq cm all as specified and directed. |
| 12 | M & L, 15mm thick rendering in C.M. (1:6) on fair faces of brick work finished even and fair without using extra cement |
| 13 | Fixing only of Solar- old LED based Road stud/ Cat eye after safe removal from exixting road at site all as specified and directed. |
| 14 | Dismantling of stone slabs and tiles laid,bedded and pointed in any mortar of any description or thickness in floors, aprons etc all as directed by Engineer-in-charge. |
| 15 | Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks over compacted sand bedding layer, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. |
| 16 | M&L Plain Cement Concrete type B-1, (1:2:4) (20mm graded crushed stone aggregate) as in Coping bed plate,hold fast etc,block benching,channeling slightly rounded or chamfered angle and throating including form work and finishing all exposed faces of cement concrete complete all as specified and as directed. |
| 17 | M&L for PCC 1:3:6 type C2 (40 mm graded aggregate) in foundations, filling and mass concrete on top surface to receive topping layer/as levelling course including necessary formwork all as specified and as directed. |
| 18 | M&L for thermoplastic paint of white and black colour to old or new plastered surface including cleaning/ preparation of surfaces complete all as specified and directed. |
| 19 | M&L for factory made precastM-25 grade PCC curved stone of size 450X400X125 MM thick of any type of surface finished even and smooth jointed with Cement morter 1:3 incl necessary earth work complete all as specified and directed. |
| 20 | NOTES:1.The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum.2.The rates for RCC/PCC shall deemed to include the cost of formwork, shuttering etc., required for complete and proper execution of the item. Refer Schedule \"A\" notes for details. |
