|
| 1 | Field kit for J.E’s having the 3 m. steel tape, 30 m metallic tape plumb bob tri square, spirit level enamel tray 30 cmx30 cm, graduated cylinder with mixing rod, vasauli straight edge, string. |
| 2 | Briquette testing machine with moulds . It is used to measure the crushing strength ofbriquettes. Briquette Testing Machine is manufactured used optimum quality components and sophisticated technology in line with industry standards.Briquettes are fitted and after fixing the briquette in the jaws, the machine is switched on. The sliding weights slides over the calibrated lever thus applying tension to specimen. |
| 3 | Digital compression testing machine with computerized output.(2000 KN)(Make – HARRISS & TARISS or Equivalent)Standard- IS:14858(2000),IS:516,ASTMC39 2000KN Electrical , Digital computerized compression testing machine for testing of concrete Cube, Concrete Cylinder, Concrete Beam, Bricks, Interlocking Tiles and other metallic & non-metallic components.Compression Testing Machine is designed and manufactured as per IS:14858. It meets all the latest relevant nation & international standards for compression testing machine . The load frame is made up of high-quality steel. The Ram/Pistondiameter is 300mm.Load frame is connected to a Hydraulic Power supply that can be operated with electricity. In case of Power failure, machine can be operated with hand also.A Digital Display with Pressure Sensor and Pressure Guage with maximum load indication pointer is fitted on the top panel of the Load on the sample . This Digital Display and Pressure Guage is calibrated as per standards with the calibration device with accuracy of +1% . Digital Display works on electricity and Pressure Guage is required/useful at the time of power failure/hand operation of machine. Electric motor shall be Crompton, Bajaj, Havells, EEC or Siemens make.Complete system supplied with all required accessories and Brick Testing Platen as per standard. |
| 4 | Electrically operated combined(Diameter 45cm. & Diameter 20cm.)Sieve shaker(Make-HARRISS & TARISS or Equivalent)Electrically operated Sieve shaker with electric motor of Crompton, Bajaj, EEC, Siemens, Havells make. Sieving is used for gravel as well as sand size particles and sedimentation procedures are used for finer soils. For soils containing coarse and fine soil particles , it is usual to employ both sieving and sedimentation procedures. |
| 5 | Digital balance (30Kg. & L.C. 1gm.) (Make-GOLD FACE or Equivalent)Battery operated system supplied with charge. |
| 6 | Digital balance(15 kg. & L.C. 0.5 gm.)(Make-GOLD FACE or Equivalent)Battery operated system supplied with charge |
| 7 | Oven(Make-HARRISS & TARISS or Equivalent)(Size-45cm.x45cm.x45cm.) (Digital) 2500 COvens uses dry heat to sterilize and are used to perform effect of ageing on materials. HT ovens are manufactured with different interior material. The ovens are of double walled construction . Outer wall is of Mild Steel, internal chamber is available in Mild Steel or Aluminium or Stainless Steel. Ovens are well insulated with glass wool. The heating is from bottom heaters made of nichrome wire and temperature is accurately controlled within +2 C thermostatically. |
| 8 | Metallic cube moulds (Cast-Iron)Size-15cm.x15cm.x15cm. made as per ISISI marked Cube Mould 15x15x15cm made as per is 10086. Moulds are made of high-quality metal, and are strong enough to resist distortion and retain their shape and size under rugged conditions. These moulds are given internal surface finish of very high quality as per IS:10086. The design is such that during dismantling and reassembly, these moulds attain accuracy of alignment. |
| 9 | Metallic cube moulds (Cast-Iron)Size-5cm.x5cm.x5cm. made as per ISISI marked Cube Mould 5x5x5cm made as per is 10086. Moulds are made of high-quality metal, and are strong enough to resist distortion and retain their shape and size under rugged conditions. These moulds are given internal surface finish of very high quality as per IS:10086. The design is such that during dismantling and reassembly, these moulds attain accuracy of alignment. |
| 10 | G.I. Tray 100cm.x75cm.x30cm. |
| 11 | Enamel Tray 30cm.x30cm.x8cm. |
| 12 | Pan trowel, Vasauli, Stove, Aluminium Container of5ltr. Capacity |
| 13 | Moisture meter for timber .(Make-HARRISS & TARISS or Equivalent)Moisture meter for timber is used for on-site inspections of material. Designed to detect actual moisture content it measures moisture throughdirect contact with the material being tested. Using electrodes the meter determines moisture presence by measuring electrical resistance between its probes. |
| 14 | Load frame of 5 Tonne capacity(Make-HARRISS & TARISS or Equivalent)Load frame consists of a cabinet which houses the electrical motor, reduction gear and the turret gear box. The loading is done by the upward movement of the lower platen which is firmly fixed to the lead screw. When the lever is set in the neutral position, it isolates the lead screw from the rest of the drive mechanism, and the lead screw can be manually moved up or down by operating the handle. A relay is fitted inside the cabinet so that in case of a power failure the unit will not restart on its own on resumption of power, unless the switches are operated. The base is detachable and the whole upper portion above the level of the top plate of the cabinet can be fixed in its proper position with the help of the clamping screws. |
| 15 | Slump Cone test with tamping rod (complete apparatus) |
| 16 | Thermometer (Digital) For bituminous mix temp. measurement |
| 17 | Bitumen Penitrometer (Make-HARRISS & TARISS or Equivalent)Standard0IS:2720part VIt has a stainless-steel cone, fitted to a bearing rod moving against a graduated scale and a penetration cup made of brass.In Penetrometer the time of penetration of the cone is automatically controlled using a timing head and an Automatic Electronic Timer. The timer supplies 220V smoothed D.C. output to the timing head precisely for 30 seconds to allow the cone to freely penetrate the soil in the trough. At the end of 30 seconds , the timer automatically de-energizes the releasing electromagnet and relocks the cone. The reading is taken from the scale. Theis eliminates individual errors and gives reproducible results. |
| 18 | Metallic scale (30cm. L.C. 0.1 mm.) |
| 19 | Sieve set For Coarse aggregate (45cm. dia)- G.I.Lid/80mm./63mm./40mm./20mm./16mm./12.5mm./10mm./4.7mm/PanSieves are used for sieving of chemical powers, medical powders, aggregated , sand soil and cement standards like ISS, ASTM, DIN etc. It is a common practice to use sieves for gradation and particlesize determination . HT manufactures brass frame and G.I. Frame Sieves it comes with Pan & Cover as per IS:460 |
| 20 | For Fine aggregated (20cm Dia) – Brass Lid/4.75mm./2.36mm./1.18mm. /600µ/300 µ/150 µ/75 µ/PanSieves are used for sieving of chemical powers, medical powders, aggregated , sand soil and cement standards like ISS, ASTM, DIN etc. It is a common practice to use sieves for gradation and particlesize determination . HT manufactures brass frame and G.I. Frame Sieves it comes with Pan & Cover as per IS:460 |
