|
| 1 | Tower: Fabrication, galvanising and supply of various types of towers (including special towers), & its body / leg (equal & unequal) extensions (complete) including stubs and hangers, D-shackles, Bird Guard, U-Bolt, Pack washer etc. |
| 2 | High Tensile Steel |
| 3 | Mild Steel |
| 4 | Supply of Bolts & Nuts for towers and stubs (including step bolts & nuts and anti theft bolts & nuts, Spring Washers Etc. ) |
| 5 | Lattice Structure (400KV) |
| 6 | Tower (400KV)MKD TH/TC |
| 7 | Tower (400KV)MKD G1/G2 |
| 8 | Supply ofEarthing material of Towers |
| 9 | Counterpoise Type |
| 10 | Supply of following Tower Accessories |
| 11 | Danger Plate |
| 12 | Number Plate |
| 13 | Phase Plate (Set of three) |
| 14 | Circuit Plate |
| 15 | Anti Climbing Device (Fork Type) |
| 16 | Supply of following items for Aviation Requirements ** |
| 17 | Span Marker |
| 18 | Obstruction lights(To be proved as per IS:5613)-a) 1 Medium + 2 Low intensity |
| 19 | Design, manufacture and supply of following line material. ***11/kv 120KN |
| 20 | i) Disc Insulators |
| 21 | ii) Long Rod Insulators |
| 22 | iii) Composite Long Rod Insulators |
| 23 | Design, manufacture and supply of following line material. ***11/kv 160KN |
| 24 | i) Disc Insulators |
| 25 | ii) Long Rod Insulators |
| 26 | iii) Composite Long Rod Insulators |
| 27 | GSS Earthwire- size 7/3.66 mm |
| 28 | Hardware Fittings |
| 29 | Single suspension H/W fittings conventional envelop typecomplete set suitable for ACSR \"MOOSE\" conductor for pilot string (suitable for 1x23, 120 KN Disc Insulators or 1x3 Long Rod Insulators). |
| 30 | Single \"V\" suspension H/W fittings armour grip type complete set suitable for Twin ACSR\"MOOSE\" conductor(suitable for 1x23, 120 KN Disc Insulators or 1x3 Long Rod Insulators). |
| 31 | Single \"I\" suspension H/W fittings armour grip type complete set suitable for Twin ACSR\"MOOSE\" conductor(suitable for 1x23, 120 KN Disc Insulators or 1x3 Long Rod Insulators). |
| 32 | Doubletension H/W fittings compression type for Twin \"MOOSE\" conductorfor pilot string (suitable for 1x24, 160 KN Disc Insulators or 1x3 Long Rod Insulators). |
| 33 | ACSR Moose Conductor (54/3.53MM AL+73.53MM STEEL) |
| 34 | Accessories for ACSR Moose Conductor |
| 35 | Mid Span Compression Joint forACSR Moose conductor |
| 36 | Repair Sleeve forACSR Moose conductor |
| 37 | Vibration dampers for \"MOOSE\" conductor |
| 38 | Line spacers with retaining rod for Twin \"MOOSE\" conductor |
| 39 | Spacers for jumpers without retaining rod for twin \"MOOSE\" conductor |
| 40 | Accessories forEarthwire |
| 41 | Vibration Damper for 7/3.66 mm GS Earthwire |
| 42 | Mid Span Compression Joint for 7/3.66 mm GS Earthwire |
| 43 | Repair Sleeve for7/3.66 mm GS Earthwire |
| 44 | Suspension Clampwith flexible Copper Bond for 7/3.66 mm GS Earthwire. |
| 45 | Tension Clamp with flexible Copper Bond for 7/3.66 mm GS Earthwire |
| 46 | Counter Weight |
| 47 | OPGW Cable |
| 48 | 24 Fibre (DWSM) OPGW fibre optic cable |
| 49 | Installation Hardware set for 24 FibreOPGW Fibre Optic cablingincluding all cable fittings & accessories except joint box |
| 50 | Joint box (24 Fibre) |
| 51 | Any Other item required for successful completion of work |
| 52 | Note: *One set of installation hardware shall contain all installation hardware fittings as may be required for 1 km of OPGW. ** Quantity indiacted is for evaluation purpose. Actual quantity to be supplied after getting approval from owner.*** Bidder will quote either for Disc or Long Rod or Composit Long Rod insualtors. In case of bidder quote for more than one types of insulators, then in evaluation heighest cost of insulators will be considered. |
