|
| 1 | Spares for Excen Crusher (Clinker Grinder) as per DRG. No. 92-P-07-2B-582 of AHP Stage-III |
| 2 | CAM Group Structure, Material-Durite, 500 BHN (Part No. 1) 1 Set = 8 Nos. |
| 3 | Wear Plate Front (Part No. 3) 1 Set = 3 Nos. |
| 4 | Wear Plate Back (Part No. 4) 1 Set = 3 Nos. |
| 5 | Wear Plate Side (Part No. 5) 1 Set = 4 Nos. (2 RH & 2 LH) |
| 6 | Shaft (Shaft with shaft structure fitted with cam group structure, shaft sleeve, cam bolt etc.) Material EN24 Part No. 2 - 1 Set = 1 No. |
| 7 | Bearing Housing for above clinker grinder (Part No. 7) |
| 8 | Packing Gland Followers (Part No. 12) |
| 9 | Packing Gland (Part No. 9) 1 Set=2 Nos. |
| 10 | Slinger (Part No. 14) |
| 11 | Lantern RingMaterial AL. Bronze(Part No. 10) |
| 12 | Shaft Sleeve SS410 (Part No. 15) |
| 13 | Special Type Self Locking Square Head Bolt(SS410) with Nut & Lock Nut with Washer for segment plates |
| 14 | Jet Pulsion Pump as per DRG. No. 92-P-07-2B-591 |
| 15 | Jet Pulsion Pump Complete Assembly (1 No.) Assembly Consists of Body Combining Tube, Nozzle with Insert, Adapter, Aligning Ring Flange Clamp Etc. But Without Tail Pipe |
| 16 | Spares for Jet Pulsion Pump as per DRG. No. 92-P-07-2B-591 |
| 17 | Combining Tube, Material -Durite500 BHN (Throat Cum Tail Pipe) (Part No. 1) |
| 18 | Nozzle Tip (SS-410) with Nozzle Insert (Material Ceremic)(Part No. 2 & 13) |
| 19 | Nozzle Adapter (Part No. 3) |
| 20 | Flange Clamp Half , Material Ductile Iron (N-8)(Part No. 16) |
| 21 | 9” Flange Clamp Half (Part No. 18) |
| 22 | Aligning Ring (Part No. 10) |
| 23 | Spares for BA Hopper Feed Gate as per DRG. No. 92P07-1B-572 |
| 24 | Renewable Seat Strip (Part No. 2) |
| 25 | Side Liner (Part No. 3) |
| 26 | Bottom Liner (Part No. 4) |
| 27 | Roller (Part No. 17) |
| 28 | Bush for Roller (Part No. 25) |
| 29 | Adjustable Seating Wedge (Part No. 13) |
| 30 | Fly Ash Intake Valve Drg. No. 9207-2B-22 |
| 31 | Fly Ash Intake Valve Complete as per Drg. No. 9207-2B-22 |
| 32 | Fly Ash Intake Valve Spares Parts: - |
| 33 | Hopper Inlet Body spares for FAIV (Part No. 1) for Fly Ash Intake Valve |
| 34 | Body Intake Valve spares for for Fly Ash Intake Valve (Part No. 2) |
| 35 | Nuva alloy 8 inch Tee for Ash Intake Valve (part No. 3) |
| 36 | Valve Disc spares for for Fly Ash Intake Valve (Part No. 4) |
| 37 | Removable Seat spares for Fly Ash Intake Valve (Part No. 5) |
| 38 | Shaft spares for Fly Ash Intake Valve (Part No. 6) |
| 39 | Spring spares for Fly Ash Intake Valve (Part No. 7) |
| 40 | Roll Pin spares for Fly Ash Intake Valve (Part No. 8) |
| 41 | Air Cylinder 2.5\" Borex5\" Stroke spares for Fly Ash Intake Valve (Part No. 9) |
| 42 | Yoke spares for Fly Ash Intake Valve (Part No. 13) |
| 43 | Lever spares for Fly Ash Intake Valve (Part No. 14) |
| 44 | Lever spares for Fly Ash Intake Valve (Part No. 15) |
| 45 | Seal Kit for Air Cylinder 2.5” Bore X 5” Stroke of Fly Ash Intake Valve |
| 46 | Air Intake Valve Drg. No. 9207-2A-11 |
| 47 | Air Intake Valve Complete as per Drg. No. 9207-2A-11 |
| 48 | Air Intake Valve Spares Parts: - |
| 49 | Body spares for Air Intake Valve (Part No. 1) |
| 50 | Valve Disc, SS- 316spares for Air Intake Valve (Part No. 2) |
| 51 | Compression Spring,Steel-EN 42B spares for Air Intake Valve (Part No. 3) |
| 52 | Valve Stem, SS-410/416 spares for Air Intake Valve (Part No. 4) |
| 53 | Totally Enclosed Rotary Slide Gate Drg. No. 9207-2A-40 |
| 54 | Totally Enclosed Rotary Slide Gate Valve Complete as per Drg. No. 9207-2A-40 |
| 55 | Totally Enclosed Rotary Slide Gate (TERSG) Spares Parts: - |
| 56 | Bode spares for Totally Enclosed Rotary Slide Gate Valve (Part No. 1) |
| 57 | Slide spares for Totally Enclosed Rotary Slide Gate Valve (Part No. 2) |
| 58 | Shaft,EN-8 spares for Totally Enclosed Rotary Slide Gate Valve (Part No. 3) |
| 59 | Bush, Bronzespares for Totally Enclosed Rotary Slide Gate Valve (Part No. 4) |
| 60 | Seal Strip, Nitrile Rubber spares for Totally Enclosed Rotary Slide Gate Valve (Part No. 5) |
| 61 | Air Cylinder spares for Totally Enclosed Rotary Slide Gate Valve (Part No. 10) |
| 62 | Wetting Unit Head Assembly Spares Parts: |
| 63 | Body Inlet Piece, Alloy CI spares for Wetting Unit Head Assembly (Part No. 1) |
| 64 | Water Chamber, FG-220, IS-210 spares for Wetting Unit Head Assembly (Part No. 2) |
| 65 | Tail Piece, Alloy CI spares for Wetting Unit Head Assembly (Part No. 3) |
