|
| 1 | Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications 225 mm o/d UPVC pipe of 2.5 Kgf. / sqcm |
| 2 | Providing, lowering in trenches to correct gradient and alignment, jointing with tyton rubber joint and cutting of reinforced cement concrete spigot and socketed pipes and specials with rubber ring ISI marked as per IS code IS458-2003 into trenches for all depths and layingout the same to correct alignment, gradients, levels etc. cutting of concrete beds and joints holes, supporting the pipes and specials in correct position in a suitable rigidmanner while the same are being jointed and until the surrounding benchings, haunches and envelopes are completed. The pipes shall rest on the beds at all joints through their lengths and fixing of rubber ring, facing, testing the pipes for leakage and making good the same leakage and all defects to the entire satisfaction of the Engineer-in-charge including all cartage etc. (B) R.C.C. Pipe NP -2, (d) 250mm i/d pipe |
| 3 | Providing & fixing 225 mm Dia. Equal Tee (6 kg/cm2 pressure) conforming to IS codeswith latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. |
| 4 | Providing & fixing 225 mm Dia. Short OR long Bend (90 Degree)(6 kg/cm2 pressure) conforming to IS codeswith latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. |
| 5 | Providing & fixing 225 mm Dia. Socket (6 kg/cm2 pressure) conforming to IS codeswith latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. |
| 6 | Providing & fixing 225 mm Tail end point 6kg with M.S./C.I. flange(6 kg/cm2 pressure) conforming to IS codeswith latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. |
| 7 | Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge)(A) Class PN-1 as per ISI (g)250 mm i/d Sluice Valves flanged |
| 8 | Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing all carriages complete (d) C.I Single air valve Screwed(Size 50mm) |
| 9 | Providing and fixing M.S. taper / reducer made out of 6 mm thick M.S. sheet complete in all respect. © Reducer 250mm x 150 mm |
| 10 | Providing & fixing 225x50 mm Dia. MS Service saddle (6 kg/cm2 pressure) conforming to IS codeswith latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. |
| 11 | Providing, laying, fixing, testing and commissioningof Class heavy duty MS Pipe conforming to IndianStandardIS:1239/3589 including fittings like tees, bends, sockets,elbows, flanges, tapers, nutsbolts, gasketsetc. fixing the pipe on the wall /ceiling with suitable clamp sandpainting with two or more coats of synthetice paint of required shade complete in all respects. (d)50mm internal diameter |
| 12 | Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public healthdepartment.Size 0.6 m. x 0.6 m. |
| 13 | Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public healthdepartment.Size 0.9 m. x 0.9 m. |
| 14 | Any Other item |
