Tender For Redevelopment and promotion of Shri Malojiraje Bhosale Garhi and Hazrat Chandshahwali Baba Dargah at Mauje Indapur Taluka Indapur. Ta. Indapur, District Pune. Regarding getting the rates approved for external items as per the state list. (online)-MAIN ENTRANCE DOOR FOR SITE ENTRY- Providing and fixing of a three-dimensional artwork for the main entrance door at the site entry. The dimensions of the door will be 3.0 meters (width) x 4.5 meters (height) x 0.125 meters (thickness).The door will feature a two-leaf open able door. The frame for it will be constructed using MS rectangular hollow box section (RHS) measuring 100 mm x 50 mm x 5 mm thick. The main door shutter framework will be built using MS square hollow box section (SHS) of size 50 mm x 50 mm x 5 mm thick, including a cross member with heavy-duty pivot hinges welded to the main shutter frame. All hardware components will be made of wrought iron, selected according to the approved sizes specified by the design architect. The hinges used will be of the old style, measuring 12 inches or appropriate sizes, with two for each door as indicated in the drawings. The door shutters will be clad with Burma teakwood planks measuring 200 mm wide x 25 mm thick, arranged vertically from top to bottom and placed side by side on both sides of the shutter door. Additionally, a 25 mm thick teakwood plank will be added to all remaining edges of both shutters. Following civil construction details. With Right side shutter door in small size = 2.0 m x 1.35 m inside open able door in side MS Metal fabrication shutter frame work will be built using MS square hollow box section (SHS) of size 50 mm x 50 mm x 5 mm thick, including a cross member with heavy-duty pivot hinges 6 inches 2 no’s welded to the main shutter frame. Decorative iron door knobs and 50 mm x 5 mm (Thick) MS METAL (Patti) as per the design will be installed on the door frame elevation as well as the central top portion of the door shutters. Smaller size 35 MM X 35 MM X 6 MM knobs and spikes will be affixed to a horizontal MS steel plate, fixed on the front side of both door shutters. The fabrication of the main shutter frame will involve cutting RHS profiles and creating right-angle joint to be fabricated with 45° angle cutting and welding all members ensuring that no inner surfaces of the box members are exposed. This will be completed according to detailed drawings, with wrought iron holdfasts, brass fixtures and fastenings, and handles on both sides. The finishing will include two coats of primer and melamine polish on all necessary fittings fixed at the specified location, including all wooden surfaces. The door will be supported and opened on wrought iron hinge with a rustic finish, designed for long-term stability. The scope of work includes all materials, labor, transportation, scaffolding, erection, and all necessary tools, considering all leads and lifts. This will be completed in accordance with the main door design concept, which involves producing art drawings, cutting wood, carving per the design, grinding, finishing, polishing, and sample making until the architects approval is obtained, as directed by the architect or engineer in charge. 2 NAGARKHANA - Providing and installing a three-dimensional artwork of a NAGARKHANA with the following dimensions: 4.5m (L) x 2.5m (W) x 3.5m (H).A) Creating Life-Size Statues of: 1. NAGARA VADAK – Size: 6’ (H) 2. NAGARA – Dimensions: 3’ x 3’ x 2.5’,3. MAVLA STATUE HOLDING A BHALA – Size: 6’ (H) + 8’ (H) BHALA = 2 NOS, The NAGARKHANA will feature the Nagaravadak and two Maratha warriors. The production process includes creating clay artwork, making molds, casting with fire-resistant Gael coat FRP resins, grinding and finishing the fire-resistant Gael coat FRP resin casting, spray painting on FRP with deco primer, adding artistic effects, and detailed painting according to the design. The final assembly will involve fixing these elements onto a metal structure made of MS (Mild Steel).B) Fabrication:The entire item of NAGARKHANA to be done in fabrication. The entire fabrication of the NAGARKHANA will resemble wooden finish, including metal rafters and wooden ceiling strips, along with decorative Wada-type arches with wooden effect crafted from FRP fire-resistant Gael coat material as per the specifications. NAGARKHANA to be done on the slab area of main entrance of the Gadhi. The dimensions for the main entrance slab area of the Gadhi are 4.5m x 3.5m.The entire item to be done in (RSH) MS fabrication of the following sizes:- 100mm x 100mm x 5mm- 100mm x 50mm x 5mm- 50mm x 50mm x 3mm, These will be treated with rust-proof paint as the base support and wrapped in designed arches and wooden railing.Wada-style arches will be constructed for the entire perimeter in fabrication with dimensions of 0.75m (L) x 2.3m (H) and painted in a dark brown wooden texture. A wooden jali work will be created for the entire length with a height of 0.3m and a thickness of 50mm in a chequered pattern, as per the design provided by the architect. Sample to be approved by an architect.Metal rafters will be installed on the internal ceiling, spaced 0.9m apart, sized at 2 x 4 (3 nos.), and finished in a wooden texture as per the architect’s choice. The entire ceiling, excluding the rafters, will be finished with a wooden batten ceiling made of seasoned teak wood, secured with matching color screws as required. For the roof area, a parapet wooden jali with a height of 0.3m will be provided around the entire perimeter, following the architects design. All work, excluding civil work, will be completed according to the directions of the architect or engineer in charge. 3 TOFA : Providing and fixing of a three-dimensional art piece of a TOFA in FRP MATERIAL fire resistance Gael coat resine , with dimensions of 3.0m (L) x 5.0m (W) x 1.5m (H). The artwork will depict a handmade TOFA statue, constructed according to the specified measurements. The skeleton for the artwork will be made using mild steel (MS) square pipes measuring 50mm x 50mm x 3mm. The interior will be constructed with bending and fixing in accordance with the design concept. Additionally, real mild steel (MS) plates measuring 6mm (thickness) x 100mm (width) will be used in the TOFA’s wheels. As per the design concept, the following processes will be implemented: 1. Creation of TOFA clay artwork. 2. Mold making.3. Production using fire-resistant FRP (Fiber Reinforced Plastic) resins.4. Grinding and finishing of the fire-resistant FRP casting. 5. Application of spray paint on the FRP deco primmer for an artistic effect, followed by artistic painting as per the design. The entire assembly will be securely fixed to the concrete using expansion bolts and drilling techniques, including all associated costs for materials and labour. The fabrication will reflect either a wooden or bronze metal effect on the FRP material, in accordance with specifications. Civil work is not included in this project and will be completed as directed by the Architect or Engineer in charge. 4 TULSIVRANDAVAN :Providing and fixing of a three-dimensional artwork of a TULSIVRANDAVAN. The dimensions of the basalt stone artwork will be 1.0 m (L) x 1.0 m (W) x 1.2 m (H). The artwork will be created using BASALT stone, taking the form of a handmade sculpture with the following specifications: 1. Base Stone Block: - Four corner stone blocks: 350 mm x 350 mm x 250 mm (H) , - Four Middle side stone block: 300 mm x 300 mm x 250 mm (H) 2. Middle Stone Block: - Size: 500 mm x 500 mm (H) x 400 mm (W) , 3. Upper Side Stone Block: - Four corner stone blocks: 350 mm x 350 mm x 250 mm (H),- Four Middle side stone block: 300 mm x 300 mm x 250 mm (H) ,4. Tulsi Pot Stone Block: - Size: 600 mm x 600 mm (W) x 300 mm (H) , 5. Corner Triangular Stone Blocks: - Size: 100 mm x 100 mm x 100 mm (H) , The stone blocks will be firmly carved according to the ULSIVRANDAVAN design, featuring hand-carving and chiseling to ensure an artistic finish. Once the stone artwork is complete, all stone blocks will be fixed using Araldite chemical adhesive and 12 mm MS metal square rods, following the architect’s design specifications.Please note: Civil work is excluded from this scope. All tasks will be executed as directed by the architect or engineer in charge. 5 WELL RAHAT :Providing and fixing of a three-dimensional MS METAL artwork representing a WELL RAHAT, measuring 1.5 meters in width, 1.0 meter in height, and 1.0 meter in depth. The main structure will be fabricated from MS (Mild Steel) using round hollow sections (RHS) of dimensions 50 mm x 50 mm x 5 mm for the main framework, as detailed in the drawings. The cross members of the shutter frame will also utilize MS steel of the same dimensions, with top and bottom heavy-duty bearings welded to the main frame. The center section will consist of a round piece measuring 100 mm x 100 mm x 6 mm. All hardware will be made of wrought iron, sized appropriately as specified or approved by the design architect. The design will reflect an old-style WELL RAHAT. According to the drawings, teakwood planks measuring 200 mm x 25 mm thick will be placed around the circular design, attached to the top side of the main frame of the Rahat. The curvature of the members will match the elevation shown in the details, along with the decorative frame of the Rahat on both sides. A smaller center support structure made of MS steel pipe will be included to ensure strength. The installation will feature solid wrought iron bars and spikes fixed to the main WELL STONE WALL, which measures 100 mm (H) x 300 mm (W) x 12 mm thick, positioned horizontally on both sides. The fabrication of the main frame will involve cutting RHS profiles and assembling joints at a 45° angle, with welding employed to avoid exposing any inner surfaces. All components will be detailed with wrought iron holdfasts, fastenings, and handles on both sides, and the wooden surfaces will be finished with melamine polishing. The Rahat will be supported by wrought iron rustic-finished wheels designed for stability and durability. Additionally, a large rope of 20 meters will be incorporated, and a wrought iron bucket will be included. This item covers all materials, labor, transportation, scaffolding, erection, and necessary tools, accounting for all leads and lifts. As per the WELL RAHAT design concept, tasks will include creating art drawings, cutting wood, carving as per design specifications, grinding, finishing, polishing, and producing samples until the design architect gives approval. All work will be carried out as directed by the architect or the engineer in charge. 6 DIWANKHANA : Providing and fixing 3-dimensional artwork in the Diwankhana, created according to the specified drawings.A) LIFE-SIZE STATUE- Life Size: 3.5 feet (h) sitting position for 5 Maratha Sardar statues and 1 standing Mavla statue, totaling 6 statues.- Mavla statue holding a Bhala with dimensions: 6 feet (h) + 8 feet (h) Bhala.- Indian sitting mattress and bolsters:1. Indian Floor Mattress Type A: 4 units, size 1.5 m x 0.8 m each.2. Mattress Type B: 1 unit, size 3 m x 1 m.3. Bolsters with cover Type A: 8 units, size 0.6 m x 0.36 m each. 4. Bolsters Type B: 2 units, size 0.9 m x 0.48 m each.The 3-dimensional artwork will depict handmade statues according to the specified measurements. The skeleton for the artwork will be constructed using MS metal square pipes measuring 50 mm x 50 mm x 3 mm. Hay will be securely tied around this skeleton to form the shape of the statue as per the design. This will include creating Mavla clay artwork, making molds, and casting with fire-resistant FRP ISO resins. The process will involve grinding and finishing the fire-resistant FRP ISO Resin casting, spray painting with FRP decorative primer, and applying artistic painting as per the design. The assembly will be completed with artistic acrylic painting on the inside of the MS metal structure. After allowing it to dry for a day, a 2K clear coat will be applied to finalize the artwork.B) FABRICATION WITH WOODEN, STONE, AND METAL EFFECTS ON FRP MATERIAL ITEMS IN DIWANKHANA All items in the Diwankhana will be constructed according to the following specifications:1. 3 units of Chourang tables, each measuring 600 mm x 600 mm x 450 mm (h).2. 2 large vases, each measuring 450 mm x 900 mm. 3. 4 artistic paintings, each measuring 300 mm x 450 mm.4. 5 Gudgudi units, each measuring 150 mm x 600 mm (h).5. 15 decorative items, which include TAT (big size) plates, VATI, TAMBYA, PANPUDA, and ADKITTA.The entire assembly will be fixed onto a concrete platform using expansion bolts, with drilling included for installation. All costs of materials, labor, etc., will be covered as per the instructions of the Architect or Engineer in charge. 7 SWING : Providing and fixing of a three-dimensional art piece titled Swing. The specifications are as follows:A) LIFE SIZE STATUES OF: 1. Marathi Lady Statue - Size: 4.5 ft. (H) x 3 ft. (W) 2. Small Marathi Boy Statue - Size: 3 ft. (H) x 2 ft. (W),Both statues will be handcrafted to the specified dimensions. A skeleton for the artwork will be constructed using MS metal square pipes measuring 50 mm x 50 mm x 3 mm.The process includes:-The clay shall be firmly tied around the skeleton to form the shape of the statue, as per the design of the Marathi Lady or Small Marathi Boy statues. - Creating molds.- Casting using fire-resistant FRP ISO (Fiberglass Reinforced Polymer) resins.- Grinding and finishing the fire resistant FRP casting. Applying a spray paint on FRP deco primmer with artistic effect and doing artistic painting as per the design. After the assembly is complete, it will be allowed to dry for a day, after which a 2K clear coat will be applied to finish the artwork. The entire assembly will be affixed to a concrete platform using expansion bolts that are drilled into the concrete.B) REAL TEAK WOOD SWING- Size: 2.45 m (L) x 1.27 m (W) x 3.5 m (H)The design includes a Wada-style swing crafted from Burma teak wood. The outer frame will consist of 2-inch thick planks, with interlocking cuts made to the specified dimensions. The inner structure will utilize 1-inch thick Burma teak wooden planks, also cut according to the design and drawings. The assembly process includes:- Fitting two planks together using 6 mm x 30 mm screws and applying marine-grade adhesive (Fevicol) .- Securing all Burma teak wood components together.- Creating a sturdy base by combining the 2-inch outer planks with the 1-inch inner planks using marine adhesive and screws. The swing base will be smoothed with sandpaper, followed by the application of French polish. After polishing, a 2K clear matte coat (PU clear coat) will be applied to the completed Burma teak wood swing. The swing will be suspended using antique brass chains, according to the design, and securely mounted to the ceiling beam with MS metal hanging attachments, nuts, and bolts. The life-size Marathi lady and boy statues will be attached to the swing base as per the given design. All work will be conducted as directed by the Architect or Engineer in charge, excluding any civil work. 8 KITCHEN :Providing and fixing 3-Dimensional artwork for a KITCHEN, consisting of five life-size statues:A)- 2 life-size statues of a sitting Marathi ladies, each measuring 3 feet in height, holding an ancient stone floor mill jate.- 1 life-size statue of a standing Marathi lady, measuring 5 feet in height, designed with buttermilk -making pot.- 1 statue of a Marathi Achari man with a chulha (traditional stove) and fire.- 1 statue of a Marathi Achari helper man, featuring a stone pata warvanta (grinding stone) making vatan (pest).The 3-dimensional artwork will be created using a handmade statue design based on specific measurements. A skeleton for the artwork will be constructed using MS metal square pipes measuring 50mm x 50mm x 3mm. Clay will be securely tied around this skeleton to form the statue shape according to the design, which will then be coated with clay. After the clay work is completed, final adjustments will ensure the artwork conforms to the desired design.Once the clay artwork is ready, the process will include making a POP mold, casting fire-resistant FRP ISO (fiber-reinforced polymer) resin, grinding, and finishing the fire-resistant FRP casting within the MS metal structure. The assembly will be completed with spray paint, deco primer, and artistic effects as per the design. The entire assembly will be fixed using expansion bolts, which will require drilling. This includes the costs of materials, labor, etc.B) KITCHEN DECORATION MATERIALS AND ITEMS: - 1 Big Stone Jate(stone floor mill)- 1 Wooden Mandani(shelf)- 6 Large Copper Bowls (Vatis)- 6 Large Copper Plates (Tats)- 6 Large Copper Tumbler (Tambyas)- 2 Large Copper Containers (Dabas)- 2 Large Copper Serving Trays (Tapiles)- 2 Large Copper Bowls (Bhagules)- 1 Butter-Making Kit- 1 Large Kadhai (wok) All items will be provided as per the design given by the architect, with samples to be approved by the architect. Work will be completed as directed by the architect or engineer in charge. 9 DINING (DINING AREA TO BE SET AS PER INDIAN SEATING STYLE) : Providing and Fixing DINING A) 3-Dimensional Art Work for Dining :- Size: 0.6 m (L) x 0.6 m (W) x 0.3 m (H) for Chourang. - Size: 0.6 m x 0.9 m x 0.1 m (H) for PAT. Both items will be created using real teak wood. CHOURANG: - Constructed from a Burma teak wood block measuring 3” x 3” x 10” (H). This block will undergo turning, carving, and finishing as per design specifications. - The outer frame will feature interlock cutting, with internal dimensions of 1.5” x 3” x 20” .- Burma teak wooden Planks will be cut as per design, with all four side Planks fitted together in 15 mm x 45 mm hole Kusu, andsecured inside burma teak wood using marine-grade Fevicol and screws. - The top side consists of Burma teak wood planks measuring 1” x 6” x 24”, also fixed together. - Inside, a planked sheet measuring 1” x 24” x 24” will be attached with 20 mm grooves, using marine-grade Fevicol and screws for stability. - After completing the Chourang woodwork, it will be rubbed with fine sandpaper and finished with French polish. A PU Clear Matt Coat (2K) will be applied as the final coat.PAT: - Constructed from a Burma teak wood block measuring 0.6 m x 0.9 m x 0.1 m (H). - The base will be a block measuring 2” x 1.5” x 20” (H) with carving and finishing according to the design. - The top side will consist of all Burma teak wood flanks measuring 1” x 6” x 36”, secured together. - A flanked sheet measuring 1” x 24” x 36” will also be installed using 10 mm grooves and secured with marine-grade Fevicol and screws. - After carving and finishing, the PAT woodwork will be sanded, followed by the application of a French polish and a PU Clear Matt Coat (2K). The architect requires a finished product with dark melamine polish.DINING AREA DECORATION MATERIAL ITEMS :As directed by the architect or engineer in charge: - 5 NOS SET: Silver-plated cutlery, including 5 plates, 10 bowls, 5 lotas, and 5 glass vessels, designed according to the Maharashtrian thali system. - 2 NOS: Miniature paintings on the wall measuring 24” x 18”, following the architects theme.- [plate_number_3]: Mashal (torch) artifact measuring 3’.- 5 NOS: Dining tablecloth designed as per specifications. 10 BEDROOM (SHAYANKAKSHYA) :Providing and fixing three-dimensional art piece for a bedroom, including specifically designed furnishings. 1. Canopy Bed:- Construct a Burma Teak wood canopy bed measuring 7 x 7 with a height of 2. The standard height of the canopy will be 5.- The bed frame will consist of a solid Burma Teak wood block measuring 4 x 4 x 84 (height), with precision cutting, carving, and finishing. - The main frame will be constructed using Real Burma Teak wood planks sized 2 x 3 x 72, designed according to specifications.- The outer frame will feature interlocking cuts as per the design, with wooden planks cut to size and fitted together using a 15 mm x 45 mm hole technique with Kusu and Araldite adhesive.- Nails and screws will secure all connections, and additional components made from Real Burma Teak wood (sizes 1 x 9 x 72) will be cut, carved, and finished to fit into grooves of 8 mm x 20 mm, using the same adhesive and fastening methods. - After final assembly, the woodwork will be polished with rubbing paper and treated with French polish. A PU clear matte coat (2K) will be applied to finish.2. Bedroom Area Decoration: - Metal Vases: Two metal vases, each measuring 18 (height) x 3 x 3 or 18 (height) x 4 x 4, in accordance with the theme. - Miniature Paintings: To be placed on the wall, each measuring 24 x 18, created according to the architects theme. - Khunti -Wooden Decorative Items: A variety of decorative items made from wood. - Mattress and Pillow Set: A complete set including mattress and pillows. - Satin Bed Cover: A satin bed cover accompanied by two pillow covers. - Old Style Trunks: Two trunks in different sizes (big and small) to enhance the decor. - Center Table: A centrally placed table to complement the overall design.The installation and all related work will be completed as directed by the architect or engineer in charge. 11 AV ROOM CHAIR - Supply & Installation 50 Chair of one Set FIX Back rest & auto tip up seat with virgin PU backrest with (for complete comfort for body) on 15 mm molded compressed ply ,KQ design strong built mechanism with 3mm angle fitted with Side footfor long life & easy movement ,common PP armrest in between two chairs, normal fabric with 3mm under layer foam for better comfort & long life. A Tip-up seat having spring tip-up movement and making it stay in upright position when not in use enabling clear row passage. 12 MALOJIRAJE BRONZE METAL STATUE 12 FEET (H) :Providing and fixing of a three-dimensional artwork, the Malojiraje Bronze Metal Statue, which will measure 12 feet in height. The statue will be crafted with a handmade design that includes several steps:1. **Preparation of Skeleton**: A skeleton for the artwork will be structure using MS Metal Square pipes measuring 100mm x 100mm x 6mm. 2. Creation of Shape: Clay will be tightly bound around this skeleton to form the shape of the Malojiraje statue.3. Art Work Development: The process includes: - Creating clay artwork. - Making a mold. - Producing FRP (Fiber Reinforced Polymer) resins for casting. - Grinding and finishing the FRP casting. - Conducting metal casting in bronze. - Welding and breezing the bronze metal casting according to the design. - Constructing the internal MS metal structure. - Applying spray paint with a deco primer. - Adding artistic effects. - Artistic painting as per the design. - Final fixing of the statue in place.After the installation is complete, the artwork will be thoroughly cleaned. The joints where the molds are joined will be filled using a putty mixture made of Micro Talc and water. Sandpaper will be used to smooth these joints to ensure a seamless appearance, making them virtually invisible. Painting will commence on the finished fiber art. Once the FRP work is finalized, the bronze metal casting process will begin using either the press casting method or the lost wax process. The bronze casting will be 4 to 8 mm thick. Following the bronze metal casting, welding will take place as per the design specifications, followed by the grinding and finishing of the metal breezing.The final touches will include applying a PU (Polyurethane) paint finish to the bronze metal statue, incorporating oxidization effects. The painting process involves: - Applying a PU Primer and allowing it to dry.- Spraying Synthetic Metal Primer in Zinc Chrome Yellow.- Applying Aspa metallic paint.- Following this with a 2K Metallic Antique metallic Color Spray.- Allowing it to dry for a day before finishing with a 2K Clear Coat. After the bronze metal statue is finished and housed within the MS Metal structure (100 mm x 100 mm x 6 mm), solid MS metal rods (50 mm x 50 mm) will be welded vertically for additional support. The entire assembly will be affixed using expansion bolts, which will be secured through drilling. This includes all materials, labour, and any other costs necessary to complete the work Clay work passing Kala Sanchalak of Maharashatra and Putla Samiti of district level approval and / or of witch ever is applicable is to be submitted prior to execution of work is bound over the statue making agency, item should be executed as per the specifications directed by the Architect or Engineer in charge. 13 MARATHA EMPIRE MUSEUM ITEMS : Providing & fixing as per concept design 3 dimensional art works of a Maratha empire museum items to be created.A) 20 no’s Coin = (Akbar, Jahangir, Shahajahan, Aurangzeb, Shiva Maharaj, Adilshaha, Nijam, Tanjawar Maratha, Holkar many other Maratha state- Sansthan), B) 5 no’s maps = (Maratha empire Capyure Areya and other that time historical maps) C) Calligraphically Letters notes and items = 10 no’s = ( Mughals, Maratha empire, Maratha states, Shivaji Maharaj letters, sardar letters, and many historical letters and notes.)D) Lamandive = 5 no’s = 1) peacock design, 2) elephant design, 3) lotas design, 4) singal light, 5) five light.E) Musical instrument = 12 no’s (old time musical instruments = 1) vasudev gudgudi 2) nagara 3) shehanai 4) Traibel music intument sambhal 5) halgi 6) dimdi 7) pipani 8) tutari 9) daf 10) tal 11) mrudung 12) ektari and 12) chipli.F) stone items = 5 no’s = 1) pata 2) varvanta 3) kalbatta 4) ukal 5) stone design carving items G) Daily use items = 5 no’s = 1) gulabdani, 2) surma dani 3) vajari 4) hatpankha 5) metal fanni H) Different type of pagadi = 5 no’s = 1) mavla 2) mugal 3) shivaji maharaj top 4) panjabi 5) peshva pagdiI) gift and presents = 15 no’s = (jwellary – 1) chal, 2) payatil tode 3) hatatil tode, 4) vale, 5) mangate, 6) putlyachi mala, 7) caplahar, 8) chandrhar, 9) kambar patta, 10) kamrecha 11) chala, 12) jhumke, 13) bali, 14) kantha, 15) boxes,J) Miniature paintings & drawings = 5 no’s = war, portrait, durbar, K) Gods statue = 10 no’s = old Maratha style wooden, stone, metal gods statue.This type of 50+ rear Maratha historical & cultural items.As per concept design- Making clay art work. Making mold.Making casting fire resistance FRP resins. Grinding and finishing fire resistance FRP casting. Metal casting in bronze metal.Breezing and welding bronze metal casting as per design.In side MS metal structure.spray paint on deco primmer.Artistic effect. Artistic painting as per design. Fixing on side etc. completed, as directed by architect or engineer in charge. 14 MARATHA WARRIOR MUSEUM ITEMS :Providing & fixing 3- Dimensional art work of a MARATHA WARRIOR MUSEUM ITEMS be created. MANY REAR MARATHA HISTORICAL & CULTURAL WEPANS, 1) TALWAR = 25 NOS ,TALWAR – 3 NOS = 40’’- 1, 42’’– 1, 40’’-1.KHANDA TALWAR – 2 NOS = 42’’– 1, 38’’ – 1. DANPATTA TALWAR – 2 NOS = 48’’– 1, 40’’- 1, .SAMSHER TALWAR – 2 NOS = 42’’– 1, 36’’ – 1. FIRANGI TALWAR – 2 NOS = 42’’ – 1, 40’’- 1. GURJ TALWAR- 2 NOS = 42’’– 1, 40’’- 1.TOTAPURI TALWAR - 2 NOS = 40’’- 1, 38’’ – 1. RAJPUT TALWAR - 2 NOS = 42’’– 1, 40’’- 1.NAYAR TALWAR - 2 NOS = 40’’- 1, 38’’ – 1. URUMI TALWAR - 2 NOS = 42’’– 1, 40’’- 1. SOUTH TALWAR - 2 NOS = 40’’- 1, 38’’ – 1. KATTI TALWAR - 2 NOS = 42’’– 1, 40’’- 1.2) BHALA = 20 NOS = A) BOTHSIDE BHALA B) ONE SIDE BHALA C) PADAKRUT D) ASWAKRUT E) GAJKUNJ F) VITA. 5 NOS – 8’, 5 NOS – 6’, DIFFRANT TYPE BHALA – 10 NOS = 18’’ / 12’’ / 10’’/ 9’’ HEAD.5 + BOTAM OF BHALA = 5 = 18’’ / 12’’ / 10’’/ 9’’.3) DHAL = 10 NOS. LETHER = 2 NOS = 18’’/ 9’’, MS METAL = 4 NOS = 24’’ / 20’’ / 18’’ / 9’’, BRASS METAL = 4 NOS =24’’ / 20’’ / 18’’/ 9’’. 4) TALWAR MUTH = 20 NOS (ALL DIFRANT TYPEOF TALWAR MUTH KHANDA TALWAR MUTH - 2 NOS,SAMSHER TALWAR MUTH - 2 NOSFIRANGI TALWAR MUTH - 2 NOSGURJ TALWAR- 2 NOS ,TOTAPURI TALWAR - 2 NOS,RAJPUT TALWAR - 2 NOS , NAYAR TALWAR - 2 NOS , URUMI TALWAR - 2 NOS,SOUTH TALWAR - 2 NOS= KATTI TALWAR - 2 NOS.5) CHILKHAT SET = 2 NOS 6) KATYAR = 18 NOS (BACYA KATYAR= 3 NOS, MARATHA KATYAR= 3 NOS, MUGHAL KATYAR= 3 NOS, RAJPUT KATYAR = 3 NOS, SINDHI KATYAR = 3 NOS, SOUTH KATYAR= 3 NOS.7) WAGH NAKHE = 5 NOS (DIFTANT TYPE AND SIZE OF WAGH NAKHI)8) JIRE TOP = 2 NOS = 1) SHIVAJI MAHARAJ JIRE TOP 2) SAMBHAJI MAHARAJ JIRE TOP, 9) KURHAD = 10 NOS (INSIDE BEND KURHAD= 5 + OUTER BEND KURHAD = 5) 10) BICHWZ = 9 NOS (DIFTANT TYPE AND SIZE OF BICHWZ), 11) JAMBIYA = 3 NOS (DIFTANT TYPE AND SIZE OF JAMBIYA), 12) TEMBHA = 3 NOS (DIFTANT TYPE AND SIZE OF TEMBHA – 36’’, 30’’, 24’’), 13) JAGNOL = 3 NOS (DIFTANT TYPE AND SIZE OF JAGNOL) 14) TELACHYA BUDHALICHI TOTI – 3 NOS (DIFTANT TYPE AND SIZE OF TOTI), 15) MANDU = 2 NOS (DIFTANT TYPE AND SIZE OF MANDU), 16) GUPTI = 2 NOS (DIFTANT TYPE AND SIZE OF GUPTI), 17) ANKUSHI = 3 NOS (DIFTANT TYPE AND SIZE OF ANKUSHI), 18) KUKRI = 3 NOS (DIFTANT TYPE AND SIZE OF KUKRI), 19) DHANUSH 2 + BAN 8 = 10 NOS (DIFTANT TYPE AND SIZE OF DHANUSH), 20) TOF GOLE 9 + MINI TOF MODEL- 1 = 10 NOS , 21) DALY USE WARRIOR ITEMS = 10 NOS (2 = CLOTH, 2 = SANDAL, 2 = GHONGADI, 2 = KADE, 2 = NECK JWELARI., 22) REAL HUMAN SIZE SARDAR STATUE = 6’ (H) = 1 NOS ,23) REAL HUMAN SIZE MAVLA STATUE = 6’ (H) + BHALA 8’ (H) = 1 NOS MANY 150+ REAR ITEMS DIFFRENT SIZE,As per concept design - MANY REAR MARATHA HISTORICAL & CULTURAL WEPANS. 1) Making clay art work, 2) Making mold ,3) Making Casting FIRERESISTANCE FRP resins 4) Grinding and finishing FIRERESISTANCE FRP Casting 5) Metal casting in bronze metal OR MS METAL 6) Breezing and welding bronze metal casting as per design 7) In side MS metal structure 8) spray paint on deco primmer 9) Artistic effect 10) ARTISTIC PAINTING AS PER DESIGN etc. completed, As directed by Architect or Engineer In charge. 15 DEEPSTAMBH :Providing and fixing a three-dimensional artwork of a Deepstambh, created using real basalt stone. The sculpture will have the dimensions of 2.4 m (L) x 2.4 m (W) x 6 m (H) and will be crafted according to specific measurements.1) Base Work: - Basalt stone block dimensions: 225 mm (H) x 300 mm (W) x 200 mm (T). This includes four stone blocks for the base, with the top stone block measuring 300 mm (W) x 300 mm (L) x 200 mm (T). The base stone will be shaped through chiseling and carving or grinding, then fixed on-site using lime or cement mortar by a masonry worker.2) Middle Depastambh Block: - The middle section will feature a circular design with dimensions of 300 mm (H) x 300 mm (L) x 150 mm (T). We will require 250 pieces of circular stone blocks, which will be cut, chiseled, and ground. Additionally, we will need 100 pieces of basalt stone blocks measuring 300 mm (H) x 150 mm (W) x 450 mm (L) for the DIVA design. These stone blocks will be treated similarly through cutting, chiseling, carving, and grinding to meet the design specifications. All stone blocks will be clad and fixed in lime or cement mortar as per the design.3) Top Side Lotus Flower Stone Block:- The top section will resemble a lotus flower, with dimensions of 600 mm x 600 mm x 600 mm (H). This stone block will be shaped through cutting, chiseling, carving, and grinding to match the conceptual design. Cladding and fixing will also be done using lime or cement mortar in accordance with the design.The artistic stone design will be meticulously executed to ensure each carved stone block is attached to the overall structure of the Deepstambh. Once the stone artwork is completed, all stone pieces will be secured using Araldite glue and 12 mm MS metal square rods, following the architects specifications. Please note that civil work is not included and all tasks will be completed as directed by the architect or engineer in charge. 16 OUTSIDE KARANAJA : Providing & fixing a 3 Dimensional Art Work outside Karanaja real Marble stone effects Size - 8.5 m (L) x 5.0 m (w) x 2.5 m (H), shall be created depicting a handmade fountain sculptures as per measurement. 1) Skeleton for Art Work shall be prepared using MS Metal Square 50mm x 50mm x 3mm pipes. 2) Clay shall be firmly tied around this skeleton in the shape of the fountain DESIGN and then it shall be coated with clay. 3) After clay works the finishing touches it will be ensured that the art work is in the shape of a perfect fountain design. 4) making mold 5) making Casting fire resistance FRP CC resins 6) Grindingand finishingFIRE RESISTANCE FRP Casting7) spraypaint on FRP deco primmer 8) artistic effect 9) Artisticpainting as per design 10) fixing on site 11) Finishing fountain real marble stone effects Painting will be done on the completed fiber art. First a P.U. Primer will be applied. Once this dries up, Synthetic Metal Primer Zinc Chrome Yellow would be sprayed. Later Aspa white should be applied followed by 2K Metallic Antique Brown Color Spray. It will be allowed to dry for a day and then 2K Clear Coat will be applied to complete the art work. Inside fountain electrical 1 hp motor with plumbing and nosels water flow as per design and all waterproofing complete. fountain FRP artworkFinishing The entire assembly is fixed concrete by using expansion bolts by drilling concrete etc., complete including cost of materials, labor etc., complete as per specifications. As per Architects design. Excluding civil work. Etc. completed, as directed by Architect or Engineer In charge 17 COURTYARD KARANJA :Providing & fixing a 3 Dimensional Art Work Courtyard Karanja real Marble stone effects Size - 6.0 m (L) x 6.0 m (w) x 2.5 m (H) shall be created depicting a handmade fountain sculptures as per measurement. 1) Skeleton for Art Work shall be prepared using MS Metal Square 50mm x 50mm x 3mm pipes. 2) Clay shall be firmly tied around this skeleton in the shape of the fountain DESIGN and then it shall be coated with clay. 3) After clay works the finishing touches it will be ensured that the art work is in the shape of a perfect fountain design. 4) making mold 5) making Casting fire resistance FRP resins 6) Grindingand finishingFIRE RESISTANCE FRP Casting7) spraypaint on FRP deco primmer 8) artistic effect 9) Artisticpainting as per design 10) fixing on site 11) Finishing fountain real marble stone effects Painting will be done on the completed fiber art. First a P.U. Primer will be applied. Once this dries up, Synthetic Metal Primer Zinc Chrome Yellow would be sprayed. Later Aspa white should be applied followed by 2K Metallic Antique Brown Color Spray. It will be allowed to dry for a day and then 2K Clear Coat will be applied to complete the art work. Inside fountain electrical 1 hp motor with plumbing and nosels water flow as per design and all waterproofing complete. fountain FRP CC resin artworkFinishing The entire assembly is fixed concrete by using expansion bolts by drilling concrete etc., complete including cost of materials, labor etc., complete as per specifications. As per Architects design. Excluding civil work. Etc. completed, as directed by Architect or Engineer In charge 18 MS RAILING WITH WOODEN EFFECT = 68 RMT : Providing and fixing of a three-dimensional artwork consisting of a metal (MS) railing with a wooden effect, identified as 68 RMT. According to the design concept, the MS metal steel frame for the door will measure 68.0 m (Width) x 1.0 m (Height) x 0.1 m (Thickness).The railing will be fabricated from MS steel solid rod with a circular section measuring 25 mm x 25 mm. The main horizontal members will be spaced with a 100 mm gap, using both pipe and vertical square hollow sections (RHS) of size 50 mm x 50 mm x 3 mm for fitting and welding. A supporting vertical member, sized 100 mm x 100 mm x 1 m (Height), will hold the main railing assembly as per the provided drawings.The railing frame will consist of circular sections and square hollow sections (SHS) sized 50 mm x 50 mm x 5 mm thick. Heavy-duty pipes will be welded to the top and bottom of the main railing structure. All hardware will be made of wrought iron in sizes that meet the approval of the design architect.The railing will feature an old-style effect and will have a height of 1.0 m, with a total length of 68 m, or will consist of 10 sections for each running meter as detailed in the elevation drawing. The design will match the wooden arches of civil construction and will incorporate decorative MS steel pipes or wooden blocks measuring 100 mm x 100 mm x 5 mm (Thickness) according to the design on the elevation frame.The fabrication of the main railing involves cutting RHS profiles and creating right-angle joints with 45° angle cuts, ensuring all members are welded without exposing the inner surface of the box members. This will be in accordance with detailed drawings, using wrought iron fixtures and fastenings, including handles on both sides, and finished with two coats of primer and melamine polish. All wooden surfaces will also receive melamine polishing.The railing will be mounted on wrought iron rustic-finish wheels to meet stability requirements over the long term. The scope of this item includes all materials, labor, transportation, scaffolding, erection, and all necessary tools, considering all leads and lifts, and completion per the main railing design concept.Tasks involved in this work include creating artistic drawings, cutting wood, and metal solid rods, carving as per design, and processing including grinding and finishing, followed by polishing. Sample making will continue until the design receives approval from the architect.All work will be performed as directed by the architect or the engineer in charge. 19 WOODEN RAILING FOR PASSAGE : Providing and fixing three-dimensional art piece: a wooden railing for a passage. The dimensions of the railing are as follows: 99.35 m (length) x 0.6 m (height) x 50 mm (thickness). The design will depict a handcrafted wooden railing tailored to these measurements.1) Dimension for Piece 1:- Size: 50 mm (width) x 460 mm (height) x 50 mm (thickness)- Material: Burma teak wood block - Additional work: Turning, carving, design, and finishing as per the specified design.2) Dimension for Piece 2: - Size: 50 mm (width) x 1.03 m (length) x 50 mm (thickness)- Material: Burma teak wood block - Additional work: Turning, carving, design, and finishing as per the specified design.Specifications:The wooden railing for the passage will be crafted according to the specified dimensions using Burma teak wood blocks. The outer frame will feature interlocking cuts tailored to the sizes, and the interior will involve precise cuts to match the design. Two blocks will be fitted together using marine-grade adhesive and screws for added strength. The entire structure will undergo thorough sanding with polish paper, followed by the application of French polish to ensure a smooth finish. Once the polish is complete, a PU clear matt coat (2K) will be applied for durability.The wooden railing for the passage will also include a base made of wood as per the design specifications. This task excludes any civil work and will be done in accordance with the directions provided by the architect or engineer in charge. 20 DARGAH LASER CUT JALI : Providing and fixing Dargah Laser Cut Jali with the following specifications:- Measurement: 26SQM- Material: MS metal steel, 3mm sheet, laser-cut as per the provided drawings.- Fabrication: All hardware will be made of wrought iron, sized as per the design architects approval. The design will reflect the traditional style of Dargah Jali.The structure will consist of a sturdy MS steel fabrication frame. It will feature thick solid wrought iron ribbit and spikes fixed horizontally on both sides of the MS steel laser cutting. The main frame will be constructed using RHS profile cutting, with right-angle joints formed through 45° angle cuts and welding, ensuring no inner surfaces are exposed.The installation will also include wrought iron holdfasts, fastenings, and handles on both sides, with a finish that includes melamine polishing of all surfaces. The Jali will be designed to support and open on wrought iron rustic finish wheels to ensure stability for long-term use.This item encompasses all materials, labor, transportation, scaffolding, erection, and the necessary tools, including all leads and lifts.The project will involve creating design concepts, art drawing work, wood cutting, carving as per design, grinding, finishing, polishing, and sample making until the design is approved by the architect or the engineer in charge, as directed. 21 METAL RAILING FOR DARGAH : Providing and fixing 3-dimensional artwork metal railing for the Dargah, measuring 0.9 meters in height. The MS (Mild Steel) metal railing will have dimensions of 20 RMT (Length) x 0.9m (Height) x 20 to 30mm (Thickness). The railing will be made from wrought iron casting according to the specified design and finish.The fabrication process will include welding a 5mm (Thickness) x 50mm (Width) 20 RMT on the top and bottom sides, ensuring proper grinding and finishing as per the design specifications. The railing will feature a horizontal gap of 100mm and vertical sections (RHS) for secure fitting and welding together with solid pattis, reinforcing the main railing work according to the provided drawings.All hardware used will be constructed from wrought iron, with appropriate sizes approved by the design architect. The design will reflect an old-style effect both on the elevation frame and throughout the fabrication of the main railing. The RHS profiles will be cut and joined at right angles, with 45° angle cuts for welding, ensuring that all members do not expose the inner surfaces of the box member.The railing will be finished with two coats of protective material and will be designed for stability, supported by a wrought iron rustic finish. The project includes all materials, labor, transportation, scaffolding, erection, and necessary tools, along with all leads and lifts.This item includes the complete scope of work as per the concept of the main railing design, which consists of creating art drawings, cutting, grinding according to design samples, and obtaining the design architects approval. The work is to be completed as directed by the architect or engineer in charge. 22 WOODEN BALUSTER FOR DARGAH : Providing and fixing three-dimensional artwork of a wooden baluster for the dargah.Dimensions: - The main baluster will have a size of 10 RMT (L) x 0.6 m (H) x 50 mm (W). Details of the Baluster: 1. First Component:- Size: 50 mm (W) x 460 mm (H) x 50 mm (T) = 90 NOS. - Material: Burma teak wood block - Work required: Turning, carving, design, and finishing as per the specified design.2. Second Component:- Size: 50 mm (W) x 1.03 m (L) x 50 mm (T) = 18 NOS. - Material: Burma teak wood block - Work required: Turning, carving, design, and finishing as per the specified design.Specifications: - The wooden baluster will be created from Burma teak wood blocks. The outer frame will be constructed with interlock cutting according to the specified dimensions, and the inner blocks will be cut as per the design.- The two wooden blocks will be securely fitted together using marine-grade Fevicol and screw fixing.- After assembling the blocks, the surface will be smoothed using sandpaper, followed by the application of French polish on the entire base.- Finally, after the polish is complete, a two-component clear matte PU coat will be applied.Additionally, the wooden baluster will be attached to a wooden base as per the design. Note that this scope of work excludes any civil work and will be completed as directed by the architect or engineer in charge. 23 DARGAH CEILING MIRROR GLASS ART WORK : Providing & fixing = 2 Dimensional art work of a dargah calling mirror glass art work - Size – 1.8m radius shall be created. The artwork will be produced according to the concept design, depicting a handmade glass cutting as illustrated in the drawings. Various sizes of mirror glass will be created based on precise measurements.The mirror glass artwork will be prepared using authentic Modi glass mirror sheets. The creation process will involve basic shape sizing followed by detailed mirror glass cutting using skilled techniques.All shapes will be cut according to the design, and the mirror glass will be fixed using a combination of adhesive and white cement. The installation will be executed step by step, following the curved design of the dome based on the drawings and measurements provided. Once all the glass work is fixed, the entire installation will be polished and finished as per the architects design specifications.Please note that civil work is not included, and all tasks will be completed as directed by the architect or the engineer in charge. 24 WADA STYLE ARCHES & COLUMNS FOR WADA & TOILET SHALL BE CREATED : Providing and fixing the creation of Wada-style arches and columns for both the Wada and toilet areas. This includes providing and fixing three-dimensional artwork for these structures. As per concept design = COLUMNSSIZE = A) 3.0 M (H) X 0.25M (L) = 42 nos out door andSIZE = B) 4.0 M (H) X 0.25M (L) = 34 nos indoor columns. As per concept design = ARCHESSIZE = A) 2.5 M (L) X 1.15 M (H) = 32 nos , SIZE = B) 3.0 M (L) X 1.15 M (H) = 31 nos .The wooden artwork will be crafted to achieve an authentic Wada style effect. This includes wood cutting according to the specified dimensions, followed by grinding, finishing, and polishing, with a total of two sets of 3 m for the toilet.Materials and Techniques: COLUMNS: - Constructed from Burma teak wood, with a dimension of 100 mm × 100 mm × either 3 m or 4 m. This involves wood block cutting, carving, and finishing.- The base will be made from real basalt stone, measuring 0.25 m × 0.25 m (Thickness) × 0.3 m (Height). This includes stone cutting, carving, chiseling, and finishing to meet design specifications.ARCHES:- Planks will be cut to size and constructed with an inside thickness of 1 inch. Two planks will be fitted together using a 6 mm groove, with the interior lined with Burma teak wood lipping using marine Fevicol and Araldite adhesive.- The arches base will undergo cutting, carving, and finishing. After being polished with sandpaper and applying a French polish, the work will be completed with a clear PU matte coat (2K).Installation: The arches and columns will be fixed onto the GADI as per the design specifications. This project excludes any civil work and will be provided and fixed as directed by the Architect or Engineer in charge. 25 HERITAGE WALK FROM RAMVES TO GADHI :Providing and fixing 3-dimensional artwork for a Heritage Walk from Ramves to Gadhi. This includes: A) LIFE-SIZE STATUE (12 NOS):- Description: Maratha battle warrior sculptures.- Size: 6 feet (H).- Details: The statue will depict a Maratha warrior holding various weapons, including a bhala, talwar, dhal, danpatta, dhanush ban, gofan, kurhad, katyar, and others.- Construction:A framework for the artwork will be created using MS metal square pipes (50mm x 50mm x3mm).Hay will be firmly tied around this skeleton in the shape of the statues design, which will then be coated with clay.After the clay work, finishing touches will be applied to ensure the artwork aligns perfectly with the design. The process will include making a mold, casting with fire-resistant FRP resins, grinding and finishing the fire-resistant FRP casting, spray painting with FRP primer, adding artistic effects, and painting according to the design. - Installation: The entire assembly will be fixed to concrete using expansion bolts and appropriate drilling techniques, including the cost of materials and labor, as per specifications.B) REAL STONE BENCHES (16 NOS):- Description: Handmade stone benches according to design specifications.- Size: - Top: 24” x 18” x 3” (T).- Base: 16” x 18” x 4” (T).- Construction:The benches will be crafted from real stone blocks, shaped and carved to meet the design specifications. The finishing touches will ensure that the artwork matches the perfect design. Once the stone artwork is completed, all stone blocks will be fixed together using araldite chemical adhesive, adhering to the design and providing finishing for the entire periphery as per the architects specifications. - Note: This work excludes civil work and will be completed as directed by the Architect or Engineer in charge.C) SIGNAGE (10 NOS):- Description: Signage will be provided and fixed according to design specifications and sizes as per the architects design.- Note: This work excludes civil work and will be completed as directed by the Architect or Engineer in charge 26 SIGNAGES :Providing and fixing of three-dimensional artwork for signage’s, to be created according to the architects specifications.A) Main Entrance Signage:- Materials: Mixed media, including metal, stone, and FRP (Fiberglass Reinforced Plastic).- Dimensions: 5’ (H) x 15’ (W) x 1’ (T).- Description: The main entrance signage will feature a handmade design with a statue, crafted to precise measurements.Construction Process:1. Skeleton Preparation: The framework for the artwork will be constructed using MS (Mild Steel) metal square pipes measuring 50mm x 50mm x 3mm.2. Shaping: Clay will be securely tied around this skeleton to form the desired design.3. Clay Coating: The structure will then be coated with clay, and finishing touches will be applied to ensure the artwork meets the intended design specifications.4. Mold Making: Once the clay artwork is complete, a mold will be created.5. Casting: We will use fire-resistant FRP resins for casting.6. Finishing: The FRP casting will be ground and finished, and a spray paint primer will be applied to achieve an artistic effect.Installation: The entire assembly will be fixed to a concrete base using expansion bolts and drilling, ensuring completion includes all materials and labor as specified.B) Other Media Signage’s:1. Specifications: - Plate Number 1: Size 24” x 18” - Plate Number 2: Size 36” x 18” - Plate Number 3: Size 48” x 12” - Total 20 no’s: [Inclusion of the main signage] 2. Description: The additional signage’s can be in 2D or 3D formats, showcasing handmade or digital effects using various materials such as MS metal, ACP sheet, acrylic, FRP, vinyl printing, UV printing, canvas printing, foam sheet, aluminum, or auto base paint effects.Art Work Preparation: All signage artwork will be crafted to meet specific measurements, emphasizing realistic effects and artistic integrity. A final check will ensure that the artwork aligns perfectly with the design.Installation: Once all signage art is complete, installation will adhere to the architects design specifications, with finishing touches provided for the entire perimeter. Civil work is excluded from this scope, and final directions will come from the architect or engineer in charge. 27 MISCELLANEOUS ITEMS : Providing and fixing 3-dimensional artwork featuring miscellaneous items.1.CURTAINS:=:48 NOS Sizes: 1.5 M (L) x 3.0 M (H) - Kitchen: 4 NOS - Bedroom: 8 NOS - 1.0 M (L) x 3.0 M (H)- Divankhana: 16 NOS- Swing: 16 NOS- Dining: 4 NOSMaterials: Satin cloth as per design, cutting, stitching, and finishing in Marathi Wada style, with the installation of a designer nod on the pillar.2. Mashals:= 17 NOSSize: 0.6 M (H) x 0.15 M (T) (As per Maratha Empire style mashal) Process: 1. Create clay artwork. 2. Make a mold. 3. Cast using fire-resistant FRP resins. 4. Add an inside MS metal structure.5. Grind and finish the fire-resistant FRP casting. 6. Apply spray paint on FRP with a primer. 7. Add artistic effects.3. Chandeliers =: 20 NOS Size:18’’ x 9’’ x 9’’ (As per Maratha Empire style chandeliers)Process:1. Create clay artwork.2. Make a mold.3. Cast using glass structure.4. Grinding and finish. 5. Add artistic affects.6. Hang on MS structure.4. .Showcase Boxes.=26 NOS- Maratha Empire Museum- Size: 1.5 M (H) x 1.0 M (L) x 0.3 M (W) (Box with glass: 11 NOS) - Size: 0.9 M (H) x 1.2 M (L) x 0.6 M (W) (Display box: 3 NOS) - Maratha Warrior Museum - Size: 1.5 M (H) x 1.0 M (L) x 0.3 M (W) (Box with glass: 10 NOS) - Size: 0.9 M (H) x 1.2 M (L) x 0.6 M (W) (Display box: 2 NOS)Process: 1. Create as per designed showcases with glass shelf work 2. Cut 18mm plywood according to the drawing. 3. Stick 1mm sun mica with marine fevicol on plywood.4. Fix cut plywood pieces in the showcase box structure as per design. 5. Fit glass shelves in the showcase box structure. 6. Grind and finish. 7. Hang on the wall with screw fittings as per design concept. Note:Complete the work, including all materials, labor, and specifications.Providing and fixing miscellaneous items as directed by the architect or engineer in charge. 28 WEEP HOLE BASALT Stone - providing and Fixing making a Weep Hole Basalt Stone work as per drawing and designSize - 0.2mm ( h) x 0.4mm ( w) x 0.230mm (t) as per design Cutting machine basalt Stone block and chiseling and carvings basalt Stone block as per design and finishing with old style weep hole stone design. etc completed as directed by Architect and Engineer in charge.
