Construction Of Water Reservoir Tank At Ssk School At Chilouni Tg, Part No. 21/18 Under Matiali Hat G.P.
Tender Value
3.19 Lakhs
Estimated cost
Bid Submission
04 Apr 2025
0 days left
EMD
6400
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
matiali → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Water Reservoir Tank At Ssk School At Chilouni Tg, Part No. 21/18 Under Matiali Hat G.P.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete(a) Depth of excavation not exceeding 1500mm |
| 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150mm including watering and ramming etc. layer by layer complete (Payment to be made on the basis of measurement of finished quantity of work) |
| 3 | (II) Cement concrete with 30 mm down graded shingles excluding shuttering.N.B. VarietyIn Ground Floor(b) 1:3:6 Proportion |
| 4 | 125mm thick brick work with 1st class bricks in cement mortar (4:1)(a) In ground floor |
| 5 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes |
| 6 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (ifecessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection,omplete as per drawing and direction.(a) For works in foundation, basement and upto roof of ground floor/ upto 4 mI. SAIL/ TATA/ RINL |
| 7 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness withequired bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)Up foundation & Plintha) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge L S |
| 8 | Plaster (to wall, floor , ceiling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints including throating,nosing, and drip course, scaffolding/ stagging where necessary (Ground Floor). [Excluding cost of chipping over concrete surface]with 6:1 cement mortar20 mm thick plaster |
| 9 | Neat cement punning about 1.5mm thick in wall dedo, Window, silts, floor, drain etc. |
| 10 | Supplying,fitting and fixing brass ferrule including connection with G.I pipes of TATA make of following dia. and upto 450mm long with screw, jamnut, sockets etc. complete in all respect, including cutting trenches in all sorts of soil and filling up the trenches as per direction of the Engineer-in-Charge(i) 25 mm dia |
| 11 | Supplying, fitting and fixing PVC pipes for underground work of approved make (medium duty) conforming to ASTMD-1785 and threaded to match with GI pipes as per IS:1239(Part- I)with all necessary accessories, special viz. socket, bend, tee, union, cross, elbo, nipple, long screw, reducing socket, reducing tee, short piece etc. fitted including cost of all materials, jointing materials, cutting pipes, making threads cutting trenches upto 1.5mtr. below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials)25mm dia medium quality |
| 12 | Supplying, fitting and fixing PVC pipes of approved make of (medium duty) conforming to ASTMD-1785 and threaded to match with GI Pipes as per IS: 1239 (Part-I) with all necessary accessories, specials viz socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, msking threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, joining materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials, Payment for painting will be made seperately)25mm dia medium quality |
| 13 | 15mm dia medium quality |
| 14 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 Kg. per Sq. Cm.(for water lines only)25mm dia |
| 15 | Supplying, fitting and fixing bib cock/Stop cockPolythene Bib Cock/ Stop cock - 15mm |
| 16 | Supply Display Board at site |
| 17 | Add GST (18%) |
| 18 | Add CESS (1%) |
AI Tender Summary
Tender Timeline
Mar 28, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedApr 04, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 07, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender