|
| 1 | Resistivity survey |
| 2 | Movement of drilling Rig machine and other ancillary equuiment & meterals complete to the site of work |
| 3 | Drilling 200 mm dia bore by Rig machine & cashing machine drill an all kind of soil and bolder up to 150 mm dia expect rock including all consumable store and meterial |
| 4 | Suplling & Lowring of MS Pipe (Mediam Duty) 150 mm Dia |
| 5 | Suplling & Lowring of MSSlotted Stainer pipe, 150 mm Dia |
| 6 | Suplling & Fixing Joint Ring Socket 150 mm |
| 7 | Development of tube well by Air Compressor (High Pressure Compressor) |
| 8 | Shrouding of Tube well bore by Pea Gravel size 1.5 mm to 4.7 mm including supply of pea gravel at Site. |
| 9 | Supply and Installation of KSB/Varuna/Cromtion make 2HP Single phase submersible pump set |
| 10 | Supplying/Fixing of Submersible electric copper cable of 4Sqm of approved quality. |
| 11 | Supplying and fixing of BCH/L&T make 2HP single phase panel board of approved quality. |
| 12 | Providing and Fixing of MS Supporting Clamp of approvd Quality. |
| 13 | Providing and fixing of 150 mm dia well cap |
| 14 | Providing and fixing of tube well assembly supporter. |
| 15 | Providing and fixing of 150 mm dia bottom bail plug |
| 16 | Providing and fixing of GI bend of 50 mm dia (NB) of approved quality. |
| 17 | Providing and Fixing of Brass Gate valve of approved quality 50 mm nominal bore |
| 18 | Providing and Fixing PVC Column Pipes Complete with all fitting complete as directed by Engineer-in-Charge: 63 mm OD (2\")(Ashirbad/supreme) |
| 19 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 15 mm dia nominal bore |
| 20 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 25 mm dia nominal bore |
| 21 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm nominal bore |
| 22 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore |
| 23 | Providing and fixing brass stop cock of approved quality :15 mm nominal bore |
| 24 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore |
| 25 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): 15 mm nominal bore |
| 26 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): 25 mm nominal bore |
| 27 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 28 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 29 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 30 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. |
