Procurement of Material & requisite works for day to day Maintenance in Zonal Office Building, Shivaji Place, Raja Garden under West Zone.; 1 Approved Rates 2 Supply of 1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable 3 Supply of 2.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable 4 Supply of 4.0 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable 5 Supply of 6.0 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable 6 Supply of 10 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable 7 Supply of 5/6 amps, one way modular switch, ISI marked 8 Supply of 3 pin 5/6 amps modular socket outlet, ISI marked 9 Supply of 15/16 amps , one way modular switch, ISI marked 10 Supply of 6 pin 15/16 amps modular socket outlet, ISI marked 11 Supply of 3 pole MCCB, 100A, 16KA 12 Supply of 3 pole MCCB, 250A, 35KA 13 Supply of 6 amps. to 32 amps. ratings , SPN MCB, C curve, 10 KA breaking capacity 14 Supply of 6 amps. to 32 amps. ratings , DP MCB, C curve, 10 KA breaking capacity 15 Supply of 40 Amp 2 pole Isolator 16 Supply of 63 Amp 2 pole Isolator 17 Supply of Modular base and Cover Plate for 3 Module 18 Supply of Modular base and Cover Plate for 4 Module 19 Supply of Modular base and Cover Plate for 6 Module 20 Supply of Modular base and Cover Plate for 8 Module 21 Supply of Modular base and Cover Plate for 12 Module 22 Supply of LED Tube type luminaire 20 Watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient LEDs with the following:(a) Total system wattage 2o watt+/- 5%(b ) Luminous efficacy lumens/watt >=95 (c) Power Factor >=0.95 23 S/I/T/C of Recess mounting CRCA housing 36W LED luminaire with acrylic cover diffuser with following specifications including fixing on existing wall/surface with connections as reqd.(a)Total system wattage = 36 watt +/- 5% (b)Luminus efficacy >=95 lumens /watt. (c)Power factor >=0.95 24 Supply of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 25 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick includingaccessories, and providing masonry enclosure with cover plate having lockingarrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt asrequired. 26 Providing and laying earth connection from earth electrode with 4.00 mm dia copperwire in 15mm dia G.I. pipe from earth electrode including connection with copperthimble excavation and re-filling as required. 27 Providing and fixing 4.00 mm dia Copper wire on surface or in recess for loop earthing as required. 28 SITC of single phase monoblock pump set complete with all accessories workable on 240/515 volts, 50 Hz AC supply(a) 1 HP (0.75 KW) single phase pump set, head from 12-30 metre suction and delivery 25x25 mm. 29 S/I/T/C of water level sensor prod. as required 30 S/I/T/C of Automatic Water Overflow Control Panel to automatically sense and stop the motor in case of overflow of tank complete as required. 31 Supplying, lowering, testing and commissioning of vertical type, multistage, totallyenclosed water filled deep well submersible pumping set complete i/c connection etc.as reqd.Three Phase 5.0 HP having discharge of 300 LPM Approx. at 39 M Head. 32 Supply, lowering and fixing following size of G.I. Pipe (M-Class) i/c cutting threading on both sides etc. ISI marked etc as reqd. 50mm(Nominal Bore)
