Tender For Construction And Routine Maintenance Of Road From 1. Noagang To Indural (Length - 5.615 Km), Package No. Tr-03-186 , Link No. L-023 Under Panisagar Block.
Tender Value
7.45 Crore
Estimated cost
Bid Submission
17 Apr 2025
0 days left
EMD
14.91 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
panisagar → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction And Routine Maintenance Of Road From 1. Noagang To Indural (Length - 5.615 Km), Package No. Tr-03-186 , Link No. L-023 Under Panisagar Block. Pmgsy-I Work
BOQ
| Sl. No. | Item Description |
| 1 | 1.Noagang to Indural (Length - 5.615 Km), Package No.: TR-03-186 , Link No.: L-023, Block:Panisagar |
| 2 | Clearing and grubbing road Land |
| 3 | Clearing and grubbing road Land including uprotting wildvegetation,grass,bushes,shrubs,saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned,upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification clause 201 |
| 4 | (A) by Mechanically |
| 5 | (I)in area of non thorny jungle |
| 6 | Setting Out ( As per drawing enclosed ) using PCC with jhama brick aggregate. |
| 7 | For all classes of soil. |
| 8 | Dismantling of Flexible Pavements |
| 9 | Dismantling of flexible pavements and disposal of dismantled materials with all lifts and upto a lead of 100 m, stacking serviceable materials and unserviceable materials separately as per Technical Specification Clause 202 |
| 10 | ( I )By Manual Means |
| 11 | (B) GranularCourses |
| 12 | Compacting orginal ground supporting embankment. |
| 13 | Loosening, leveling and compacting original ground supporting embankmentto facilitate placement of first layer of embankment, scarified to a depth of 150mm, mixed with water at OMC and than compacted by rolling so as to achieve minimum dry density as given in tables 300.1 and 300.2 for embankment construction as per technical specification clause 301.4.1. |
| 14 | Construction of Embankment with material obtained from road way cutting |
| 15 | Construction of Embankment with approved materials deposited at site from Roadway cutting and excavation from drain and foundation of other structuresgraded and compacted to meet requirement of tables 300.1 and 300.2 as per technical specificationclause 301.5 |
| 16 | ( A ) For spreading beyond100m. |
| 17 | ( B ) For spreading within 100m. |
| 18 | Excavation in cutting in soil by manual means with lead upto 50.0m. |
| 19 | Excavation in road way cutting in soil by using manual means for carrying of cut earth to Embankment site with a lifts and lead upto 50.0m as per technical specification clause 302.3. |
| 20 | Excavation in soil with dozer with lead upto 100m. |
| 21 | Excavation for roadway in soil by mechanical means with dozer including cutting and pushing the earth to site of embankment upto a distance of 100m, including trimming bottom and side slope in accordance with requirements of lines, grades and cross sections as per technical specification clause 302.3. |
| 22 | Excavation in soil using hydraulic Excavator and Tippers with disposal upto 1000m. |
| 23 | Excavation for road work in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections and transporting to the embankment location with a lift and lead upto 1000m as per technical specification clause302.3. |
| 24 | Construction of Subgrade and earthen shoulder |
| 25 | Construction of subgrade and earthen shoulder with approved materials obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirementof table 300.2 with lead 1000 m as per Technical specification Clause303.1. |
| 26 | Surface drains |
| 27 | Construction of unlined surface drains of average cross sectional area 0.4 sqm in ordinary soil to specified lines, grades, levels and dimensions. Excavated material to be used in Embankment with a lift upto 3m and lead of 50m ( average lead 25m ) as per technical specification clause 307. |
| 28 | ( I ) Surface Drains in Ordinary soil. |
| 29 | ( A ) Manual means. |
| 30 | Road side Pucca Drain |
| 31 | Construction of Road side pucca drain with M10( 1: 3 : 6with jhama Brick aggregate ) to specified lines, grades, levels and dimensions as per approved design and technical specification Clause 307, 1606. Excavated material to be used in embankment at site. |
| 32 | ( B ) Trapezoidal drain ( top clear width 600mm, bottom clear width 300mm and clear depth of 400mm. |
| 33 | ( i ) In ordinary soil. |
| 34 | Toe wall |
| 35 | (i)Earth work in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50m, dressing of sides & and bottom and back filling in trenches with excavated suitable material. |
| 36 | ( I ) Ordinary soil |
| 37 | ( i ) Upto 3m depth |
| 38 | Brick masonary in cement mortar in foundation completed excluding pointing & plastering as per drawing & technical specifications clauses 600, 1202 & 1203 |
| 39 | ( ii ) Brick Masonary in 1 :4 cement morter |
| 40 | (iii). Plasteringwith cement mortar (1:4)15mm thick on brick work (In substructure ) as per technical specification clauses 613.4 & 1204 |
| 41 | (iv) Providing weep holes in brick masonary / stone masonary, plain / reinforcedconcrete abutment, wing wall, return wall with 100 mm dia AC Pipe or PVC pipe (110 mm OD of 6.0 kg/cm2pressure ) extending through the full width of the structures with slope of 1( V ) : 20 ( H ) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 |
| 42 | (V). Providing concrete for plain concrete M-15(using jhama brick aggregate) in open foundations complete as per drawings and technical specifications clauses 802,803,1202,and 1203. |
| 43 | (i). In foundation below GL. |
| 44 | (ii)in coping |
| 45 | Granular Sub-Base. |
| 46 | Construction of granular sub base by providing well gradated material spreading in uniform layers with motor grader onprepared surface mixing by mix in place methid with rotavator at OMC , watering and competing with smooth wheel/vibratory roller80-100 KN static weight to achieve the desired compaction, complete as per MORD technicalspecification clause 401BY Mechanical meansFor Grading - II Material ( Jhama brick aggregate ) |
| 47 | Charge for construction of Granular Sub-base |
| 48 | Charge for Construction of granular sub-base by providing well graded material ( 53 mm to 0.075 mm Jhama Brick Aggregate , Grading-I ), spreading in uniform layers with tractor with attachments on prepared surface, mixing by mix in place method at OMC, applying and brooming sand to fill up the interstices of coarse aggregate, watering and compacting with smooth wheel roller to achieve the desired density, complete as per MoRD Technical Specification Clause 401.( excluding the cost of jhama aggregate which are available at site only). |
| 49 | By Mix in Place Method |
| 50 | WBM Grading.-2- 75mm Compacted thickness . |
| 51 | Providing, laying spreading and compacting 53m.m to 12.5m.m jhama Brick aggregates to water Bound Macadam specification including spreading in uniform thickness, hand packing rolling with three wheel vibratory roller 80 - 100 K.N static weight in stages to proper grade and camber, applying and brooming, filler materials to fill up the interstices of course aggregate, watering and compacting fill up the interstices as per technical specification clause 405. |
| 52 | ( A ) By mechanical means |
| 53 | WBM Grading.-3- 75mm Compacted thickness . |
| 54 | Providing, laying spreading and compacting 53m.m to 12.5m.m jhama Brick aggregates to water Bound Macadam specification including spreading in uniform thickness, hand packing rolling with three wheel vibratory roller 80 - 100 K.N static weight in stages to proper grade and camber, applying and brooming, filler materials to fill up the interstices of course aggregate, watering and compacting fill up the interstices as per technical specification clause 405. |
| 55 | ( A ) By mechanical means |
| 56 | Prime coat. |
| 57 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means as per Technical Specifican Clause 502 |
| 58 | ( I ) Low Porosity. |
| 59 | Tack coat |
| 60 | Probiding and applying tack coat with Bitumen Emulsion ( RS - 1 ) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with hydraulic broom as per technical specification Clause 503. |
| 61 | 20mm thick open - graded premix carpet using Bituminous ( penetration grade / modified bitumen )Binder. |
| 62 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 KN Static rollar capacity, finished to required level and grades to be followed by seal coat of either TypeA or Type B or Type C or type D as per Technical Specification Clause 508. |
| 63 | By Mechanicall Means with Bitumen(S-65) |
| 64 | Seal CoatProviding and laying seal coat sealing the voids in a bituminious surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C asper Techinical Specification Clause 510( A ) By Manual Means. |
| 65 | Case - Iv : Type D |
| 66 | ( II ) Bitumen (S-65) |
| 67 | Providing and fixing of retro-reflectiorised cautionary, mandatory and informatory signasper IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle Iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 Grade cement concrete 450mm x 450mm x 600mm, 600m.m below ground level as per approved drawing and technical specification clause 801. |
| 68 | 600mm equilateral triangle aluminium sheating |
| 69 | 600mm Dia circular aluminium sheating. |
| 70 | 800×600 mm rectangular aluminium sheeting |
| 71 | Reinforced cement concrete M15 grade Kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Techinical Specification Clause 1703 |
| 72 | (i)5th Kilometre Stone(precast) |
| 73 | (ii) Ordinary Kilometer Stone (precast) |
| 74 | (iii)200 m stone (Precast) |
| 75 | Construction of RCC guide posts of 250mm dia and total 600mm long, ( 300mm below G.L) M15 grade ( with jhama brick aggregate) cast in situ with 20mm nominal size aggregate, true to line and grade, tolerence of vertical RCC Posts not to exceed 1 in 500 as per drawing and technical specification clause 1401.6.( A ) In ordinary soil. |
| 76 | Providing and fixing \"Logo\" of PMGSYProject |
| 77 | Providing and fixing of typical PMGSY informatory sign bord with Logo as per MORD specifications and drawing. Three MS plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25 mm x 5 m size on back on edges. The lower plate will be weldedwith MS Angle Iron frame of 25mm x25mm x 5mm.The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mmx75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450 mmx450x600 mm .600mm below ground level. the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All MS will be stove enameled on both sides. Lettering and printing arrows border etc. will be painted with ready mixed synthetic enamel paint of superior quality in require shade and color. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1(Drg at Annexure:-lll) |
| 78 | Providing and fixing \"Citizens\" Information board of PMGSY / Bharat Nirman Project |
| 79 | Providing and fixing of typical Citizens\" Information Board with Logo as per MORD specifications and drawing. Two MS Plates of 2.0 mm thick,dulywelded with MS flat iron 50 mm X 5 mm size on back on edges. The flat iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 76.1 mm OD (horizontal) and 2 nos. 76.1 mm OD (Vertical) steel tube posts ( as per IS : 1161- 1979, Medium class) duly embedded in cement concrete M-15 grade blocks of600 mm X 600 mm X 750 mm, 750 mm below ground level. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube and flats will be painted withprimer and two coats of epoxy paint as per drawing and specification Clause 1701 and Annexure 1700.1 |
| 80 | Providing and fixing \"Maintenance board of PMGSY |
| 81 | Providing and fixing PMGSY Maintenance board as per MORD specifications and drawing, consisting of 75 mm square or 75 mm steel tube frame welde4d with 25 mm MS flat iron strips, 4 Nos horizontally and 2 nos vertically, two nos. CR/GI plates 1.6 mm thick welded with the MS flats, all MS will be stove, enameled on all sides, painting the boards and lettering as pare drawing with ready mixed synthetic enamel paint of superior quality in required shade and colour , fixed in ground Works und with M.15 grade concrete (with jhama aggregate) 60x60x75 cm (depth) including cost of excavation, concrete, all materials, labour and carriage. |
| 82 | Earth work in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50m, dressing of sides & and bottom and back filling in trenches with excavated suitable material. |
| 83 | ( I ) Ordinary soil |
| 84 | ( i ) Upto 3m depth |
| 85 | Providing M-15 conc. With jhama agg. In open foundation below wing wall, return wall, etc aas per drawing and technical specification clause 802,803,1202 & 1203 |
| 86 | ii. Brick masonry work in 1:4 cement mortar in wing wall,Return wall e.t.c complete excepting pointing and plastering as per drawing and technical specification clauses 602,603,604,1202 and 1204 |
| 87 | iii. Plastering with cement mortar(1:4) 15mm thick on brickwork in wing wall,Return wall e.t.c in substructure as per technical specification clauses 802,804,805,806,807,1202 and 1204 |
| 88 | Plain / reinforced cement concrete in substructure completeincluding formwork as per drawings & technical specification Clauses 802, 804, 805,806, 807,900, 1202 & 1204. |
| 89 | i) P.C.C grade M-15 below base slab (using jhama) |
| 90 | (iii) RCC grade M25 |
| 91 | Supplying , fitting & placing HYSD bar. |
| 92 | Supplying fitting and placing HYSD bar reinforcement ( Fe 415 ) in substructure completed as per drawing and technical specification Clauses 1002,1005, 1010 and 1202. |
| 93 | Providing and laying reinforced cement concrete ( using fine sand ) in superstructure as per drawing and technical specifications clauses 800, 900, 1205.4 & 1205.5. |
| 94 | ( II ) RCC grade M25 |
| 95 | ( i ) For height upto 5.0m. |
| 96 | Supplying fitting & placing of HYSD bar. |
| 97 | Supplying fitting and placing HYSD bar reinforcement in superstructure complete as per drawing & technical specifications Clauses 1002, 1010 & 1202. |
| 98 | Providing and laying of cement concrete block |
| 99 | Providing and laying of apron with cement concrete blocks of size as per Table 1300.1 cast-in-situ and made with nominal mix of M-15 grade cementconcrete ( using jhama brick aggregate ) as per drawing and technical specification Clause 1301 ( rate includes preparation of bed, nominal surface re-inforcement and filling of granular material in recesses between blocks.) |
| 100 | Painting two coats on new concrete surface |
| 101 | Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new,plastered/concrete surfaces as per drawing and Technical Specification on Pillars for inscribing structure number |
| 102 | Printing new letters fand figures of any shade |
| 103 | Printing new letters fand figures of any shade with synthetic enamel paint black or any other approved colour to give and even shade as per drawings and Technical Specification Clause 1701 in English or Roman Hyphens, comas and the like not to be measured and paid for . Detail for 100 letters of 160 mm height, i.e, 106 m |
| 104 | Maintenance |
| 105 | Total for 1st year maintenance (including 18% GST) |
| 106 | Total for 2nd year maintenance (including 18% GST) |
| 107 | Total for 3rd year maintenance (including 18% GST) |
| 108 | Total for 4th year maintenance (including 18% GST) |
| 109 | Total for 5th year maintenance (including 18% GST) |
| 110 | ● The upgradtion cost is inclusive of GST @ 18% and ● Maintenance amount is pre-specified by the authority as mentioned above. |
AI Tender Summary
Tender Timeline
Mar 27, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedApr 17, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 17, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender