|
| 1 | CIVIL WORK: Earthwork in excavation of foundation in all kinds of soil within 50 mtrs initial lead and 1.5 mtrs initial lift including levelling and dressing the bed etc. complete |
| 2 | Filling F&P with sand well watered and rammed including cost, conveyance of all material and labour etc complete as per the direction of EIC. |
| 3 | P. C. C ( 1: 3:6)with using 40mm size hard granite metal including cost, conveyance of all material and labour etc complete as per the direction of EIC. |
| 4 | Fly ash bricks mesonery in C M ( 1:6 ) in F & P includingincluding cost, conveyance of all material and labour etc complete as per the direction of EIC |
| 5 | R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying etc complete. |
| 6 | Column Footing |
| 7 | Column upto plinth |
| 8 | Plinth beam |
| 9 | Lintel bend |
| 10 | Column upto RL |
| 11 | Roof beam |
| 12 | Roof slab |
| 13 | Chajja |
| 14 | Fly Ash Brick masonry C. M. (1:6 )in superstructureincluding cost, conveyance of all material and labour etc complete as per the direction of EIC. |
| 15 | CC (1:4:8) with using 4 cm CBHG metal including cst of materials etc comp. |
| 16 | Supplying ,fitting and placing uncoatd HYSD Bar reinforcement complete as per drawing and technical specification. |
| 17 | 12mm thick CP with CM (1:6) OVER Brick work,including cost,conveyance of all material and labour etc complete as per the direction of EIC. |
| 18 | 16mm thick CP with CM (1:6) OVER Brick work,including cost,conveyance of all material and labouras per instructions of EIC. |
| 19 | Supplying & Fixing Kota tiles of minimum 16 mm thick and above 0.10 sqm of approved make in floors over 25 mm thick bed of cement mortar 1:1 joined with cement slurry mixed with pigments tomatchthe shade of the tiles,including rubbing & polishing etc.complete including cost,conveyace,taxes & ryalities of all materials,labour with TP complete in all respect. |
| 20 | Supplying of Mild Steel doors and windows including cost, conveyance of all material etc complete as per the direction of EIC. |
| 21 | PaintingEnamel paint 2 coats over a coat of primer to doors & window including cost of paints,labour etc complete. |
| 22 | Wall paintings2 coats with Weather coat ofapproved shade on exterior face of new work to give an even shade. |
| 23 | Wall painting2 coats with Distemper of approved shade on new work to give an even shade including cost of paint. |
| 24 | Earthwork in excavation of foundation in hard soilwih inicial lead andlift including levelling and dressing the bed etc. complete |
| 25 | Fillingin foundation and plinthwith well watered and rammed,including cost of all. |
| 26 | CC (1:4:8) with using 4 cm CBHG metal including cst of materials etc comp. |
| 27 | Fly ash bricks mesonery in C M ( 1:6 ) in superstucture including cost,conveyance of all material and labour etc complete as per the direction of EIC |
| 28 | Provision for display board |
| 29 | provision for Blackboard (size 12\"0\"x4\"0\") |
| 30 | ELECTRICAL WORKS:Recessed wiring to light point in 18mm dia non metallic flexible polythene conduit conforming to IS-694/1973 WITH 1sq mm PVC insulated ,single core multistrand copper wire of ISI marked conforming to IS-694/1990 and earth continuity in 1.22mm dia HDBCwire with metallick switchboard &MS sheet including provision of earth screw ,painted with one coat of red oxide and two coat of DA grey animal paint ,conforming to IS1533 PART-I 1963 with 3mm baklite /phenolic laminated cover fixed with sheet steel screws including supply and fixing of 5A,250V,flush type switch of ISImarked conforming to IS-3854/1999mounted on C.I circular box having front baklite cover complete with all accessories and connections. |
| 31 | A.Group- A |
| 32 | BGroup-B |
| 33 | CGroup -C |
| 34 | Recessed wiring to 3pin plug point in 2.5sqmm 1.1 KV PVC insulated,seathed,single core multistrand copper wire of ISI marked conforming to IS-694/1990 and earth continuity in 1.22mm dia HDBCwire with metallick switchboard &MS sheet including provision of earth screw ,painted with one coat of red oxide and two coat of DA grey animal paint ,conforming to IS1533 PART-I 1963 with 3mm baklite /phenolic laminated cover fixed with sheet steel screws including supply and fixing of 5A,250V,flush type switch of ISImarked conforming to IS-3854/1999mounted on C.I circular box having front baklite cover complete with all accessories and connections. |
| 35 | Recessed wiring to sub main with V PVC insulated,seathed,single core multistrand copper wire of ISI marked conforming to IS-694/1990 in 20/25mm dia non metallic PVC condiut heavy duty conforming to IS-6946/1973 & earth continuity in 2.24mm dia HDBCwire from lighting distribution board to switch boardcomplete with all accessories and connections. |
| 36 | 2x1.5 Sq.mm +1x1.5 sq mm |
| 37 | 2x2.5 Sq.mm +1x1.5 sq mm |
| 38 | 2x4.00 Sq.mm +1x1.5 sq mm |
| 39 | S/F of BK angel holder |
| 40 | Supply, installing, Testing and commissioning of celling fan 1200 mm sweep 230/250 volts 50HZ complete with suitable,clamp,down rods blades canpoy,rubber,shaackel capacitor,regulator and connections with 1.5 sqmm PVc insulated copper conductor cable etc,as required and fan hooks made of 16mm M.S rods in RCC roof complete with all accessories.(Bajaj,orient,crompton) |
| 41 | Supplyng and fixing of 9\" size exhaust fan of approved make with holding down frame Etc. all complete as per drawing,specification and direction of EIC(Bajaj,orient,crompton) |
| 42 | Supplyng and fixing of 9Watt LED Bulbof approved make with holding down frame etc. all complete as per drawing, specification and direction of EIC(Bajaj,orient,crompton) |
| 43 | Supply,fixing and fitting of 1x20 watt 4\" long flouroscent tube light fitting (Patti Type) on wall surface complete with 1no of20watt tube of approved make complete with all necessary fixing materials including termination and labour etc as per the EIC (make,philips,bajaj/crompton or equivelent) |
| 44 | Supply&fixing of4 way phase distribution board conforming to IS-5133/part-I/1969 with 1 nos 40 amp DPMCB incoming &6 nos Minature 6/10/16 Amps circuit Breaker of ISI marked conforming to IS 13032/1991 in sheet steel enclosure along with busbar ,neutral link,earth bar,din rail and mettalick board complete withall acesseriesand connections. |
| 45 | Supply&fixing of B Series SP MCB(Havels,HPL,Anchor) |
| 46 | Supplyng and fixing of 32A DP Main switch (HPL/Anchor)etc. all complete as per drawing,specification and direction of EIC |
| 47 | S/F of standard earthing conforming to IS -3043/1987 including supply and fixing of 38mm /40mm dia heavy duty G.I pipe 3mtrs long conforming to IS 1239 part-I/1990 .The pipeshall have 12mm dia perforated hole sat 15cm interval centre to centre up to 2.5 mtrs height from bottom upper end threade and fited with 38mmto40mm dia GI flange with provision of holefor making connection of earth continuity wire ,complete with masonary works ,for earth pit chamber and S/F of CI hinged top cover 30cmx30cmx1cm size. Excavation of earth pit of size 0.75mtrsx0.75mtrs x3mtrs.The earth pit shall have an alternate layer of 105mm charcoal and 50mm salt at 150mm radious around earth electrode up to a depth of 465mm from bottom and the rest shall be filled with homogenious layer of salt,sand and charcoal to a further depth of 2035mm and balance portion by surplus earth No 8 SWG/4.06 mm dia HDBCwire .run inside the wall at a depth of 50mm by cutting the wall surface and plaster the cutting portion of the wall after laying the wires as earth conduit conductor main switchto earth electrod .both end of the earth wire should be provided with copper cable socket duly solderded and fixed G.I nut&bolts. |
| 48 | S/L of No8 SWG Copper wire |
