|
| 1 | Earth work excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification. (Narrow excavation) |
| 2 | Supplying and filling in foundation, basement, etc with Crushed Stone sand filling in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 3 | Cement Concrete 1:5:10 (One Cement, Five M-sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundationincluding dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification. |
| 4 | Plain Cement Concrete 1:2:4 (one cement, two M-sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers. |
| 5 | Cement Concrete 1:2:4 (One Cement, Two M-sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers |
| 6 | For Foundation and Basement |
| 7 | For Super structure in Ground floor |
| 8 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification.(Contractor has to make his own arrangements for the supply of steel and binding wire) |
| 9 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oakjoists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) |
| 10 | For Column footing, Plinth beam, Grade beam, etc.., without strutting. |
| 11 | For Roof slab, lintel beam, etc.., |
| 12 | For plane surfaces such asrectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.., |
| 13 | Brick work in Cement Mortar 1:5 using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9\" x 4-1/2\" x 3\" / Fly Ash Bricks of 230 x 110 x 75mm size for foundation and basement including curing, etc., complete complying with standard specification. |
| 14 | For Foundation and Basement |
| 15 | For Super structure in Ground floor |
| 16 | Brick work in Cement Mortar 1:3 using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9\" x 4-1/2\" x 3\" / Fly Ash Bricks of 230 x 110 x 75mm size for foundation and basement including curing, etc., complete complying with standard specification. |
| 17 | Supplying and filling in foundation, basement, etc with Stone Dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 18 | Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two M-sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panellingwherever necessary and as directed by the departmental officers) - 40mm thick |
| 19 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three P-Sand) 20mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers. |
| 20 | Plastering with Cement Mortar 1:5 (One cement and Five P-sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 21 | Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three P-Sand)base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 22 | Dadooing walls with following best approved quality, white / colour glazed tiles of size 300 x 200 x 6mm set in Cement Mortar 1:2 (One Cement and Two P-sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. |
| 23 | Painting the walls withPlastic emulsion paint two coats over one coat of primer as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work). |
| 24 | Manufacturing, Supplying and fixing of Steel entrance doors with the followig specification, M.S. Angle of size 40x40x6mm at 3.5 Kg/m are used for outer frames and M.S. Angle of size 35 x 35 x 5mm at 2.6 Kg/m for the shutter frames.Stiffeners with M.S. Flat 32x6mm at 1.50 Kg / m is provided for fixing the aldrop for the door and welded intact 18 gauge CR Sheet is laid as panel in the shutters and welded intact of 1/3 bottom portion of the shutters, 2/3 portion at top provided with M.S. Grill at 20 Kg / m2 as per design and laid as panel in the shutters.Necessary \"J\" section having M.S. Angle 46x25x3mm at 2.28 kg/m is provided in between M.S. Grill and CR Sheet for compact fixing of the grill and sheet in position.The design and style for the upper panel should be approved by the departmental officers.M.S. Flat 18 x 5mm at 0.7 Kg/m is welded as additional stiffiners at the rear side of the shutter in the bottom panel for strength and durablity.M.S. Flat 32 x 3mm at 1.10 Kg / m is provided over the edge of one shutter in case of double door, to conceal the gap between the shutters.2 Nos. of hinges in case of single lead doof and 4 Nos. of higes in case of double leaf doors are provided at an appropriate place in the outer frame.6 Nos. of hold fats of 200mm in length spliced at the ends are welded to the outer frame of the door, Tower bolts 2 Nos. one at top and the other at the bottom are provided.In case of double leaf door one number aldrop is provided at an appropriate place in the doors; two numbers aldrop in single leaf door.A tie bar is provided at the bottom of the outer frame to prevent twisting of frame during transportation of fixing.All members are given one coat of red oxide primer as directed by the departmental officers.The rate includes cost of all materials, labour charges, taxes, transportation to site of work, loadin unloading and all other incidental charges etc., complete. |
| 25 | Supplying and fixing in position of Solid PVC Door shutter using 19 guage 19mm MS sq. tubes for styles and outer frames, 15mm MS sq. tubes for top, lock and bottom rails.The steel tubes shll be covered with 5mm thick solid PVC sheets.Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm.The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm.The over all size of frames shall be 50mm x 45mm, with suitable suitable rabate for housing the shutter. |
| 26 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications.(The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level |
| 27 | 75mm dia PVC soil / waste pipe |
| 28 | 110mm dia PVC soil / waste pipe |
| 29 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). |
| 30 | PVC Elbow |
| 31 | 110 mm dia |
| 32 | 75 mm dia |
| 33 | PVC Elbow with door |
| 34 | 110 mm dia |
| 35 | 75 mm dia |
| 36 | Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. |
| 37 | Laying PVC Pipes of dia 32 mm |
| 38 | Laying PVC Pipes of dia 25 mm |
| 39 | Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements |
| 40 | Coupler |
| 41 | 32 mm Dia |
| 42 | 25 mm Dia |
| 43 | Elbow |
| 44 | 32 mm Dia |
| 45 | 25 mm Dia |
| 46 | Tee |
| 47 | 32 mm Dia |
| 48 | 25 mm Dia |
| 49 | Supplying and fixing in position GI unions (32 mm Dia ) of heavy duty of approved quality and good variety of various sizes inluding necessary cutting and threading of GI pipes for jointing the union and providing two coats of painting with good variety and approved quality of synthetic enamel paint over one coat of primer in case of pipe line above ground level / one coat of tar in case of below ground level for both internal and external water supply arrangements, etc., complete complying with standard specifications. |
| 50 | Supplying and fixing best quality and make of ready mixed plastic Syntex water tank having 1000 liters capacity including necessary provision for conveying jointing delivery line scour pipe over flow pipe etc., and lifting the tank to the top of building placing in position etc., completecomplying with standard specification as directed by departmental officers. |
| 51 | Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with \"P\" or \"S\" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. |
| 52 | Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm \"P\" or \"S\" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. |
| 53 | Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia \"B\" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. |
| 54 | Finishing the top of slopped roof, sun-shade with Decorative Pressed Tiles of approved quality laid in cement mortar 1:3 20mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same red oxide mixed mortar etc complete, complying with standard specifications. |
| 55 | Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve ( 32 mm Dia ) with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements).The valves to be used on work shall be got approved by the Engineer incharge before use on work. |
| 56 | Supplying and fixing in position 15mm dia short body CP / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 57 | Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. |
| 58 | Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. |
| 59 | Supplying and fixing best approved best quality brass CP soap tray of size 150 x 100mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. |
| 60 | Supplying and Roofing with TCT colour coated Galvalume sheet 0.47mm thick with 150 GSM will be anchored with self threaded GI screws of 3\" with rubber washers of suitable etc. The profile ridges having 1.20m over lap on each slope has to be fixed on line top with required screws including cost of all materials, labour transporting conveyance including laying the sheet over purlins of MS Square tubes 50 x 50 x 2.50 mm and cross members of MS Square tubes 25 x 25 x 2.50 mm jointed with cleat angle with proper bolt and nuts with cantilever action, etc., complete complying with standard specification. |
| 61 | Supplying and fixing of RCC 1:2:4 Jolly 5cm thick including Manufacturing moulding, curing, etc, complete as directed by the departmental officers. |
| 62 | Supplying and fixing of MS Grill of approved design including fixing in position the rates includes of one coat of priming with red oxide primer, etc,. Complete. |
| 63 | Supply and fixing of UPVC Windows as per standard specification. |
| 64 | Painting two coats over new iron work over existing Red oxide primer in all floors including thorough scrapping charges for Scaffolding, etc, complete complying with standard specification. |
| 65 | Sub total |
| 66 | GST @ 18% |
