|
| 1 | PART A :- |
| 2 | SITC of quick make and quick break 4 Pole current limiting MCCB having following current rating shourt circuit breaking capacity at 440/415 V.50 Hz. O/L & S/C settings and conforming to IS 13947-2 /IEC 60947-2 with front face and centralised adjustable line load interchangeability having positive isoloation capability privision for UVRshunt trip earth fault trip push test to trip including making connections with lugs/spreaders etc. as required up to 100 Amp.. 16/25 KA adustable O/L & Fixed S/C setting. Make Havell\"s, Standard, Siemens. |
| 3 | P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/C/D triping characteristic) ISI makred IS :8828 (1996)/ conforming to IEF 60898 in existing board/sheets including making connections with lugs, testing etc. as required Group-3 Four pole MC |
| 4 | 6 A to 32 A Rating |
| 5 | 40 A to 63 A Rating |
| 6 | P&F thermal over load relay with built up in single phase protection and having at least 1 No. & 1 NC contacts manual/ auto reset facility including making connection testing etc. as required |
| 7 | 15 to 20 Amp |
| 8 | 21 to 30 Amp |
| 9 | 31 to 40 Amp |
| 10 | P & F push button actuators and integral contact block of dia. 22.5 mm including making connection etc. as required. |
| 11 | Non luminous type |
| 12 | Luminous typeRed , Yellow, Green, Amber |
| 13 | SF of (0-500) V range Volt meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. |
| 14 | Analog type ( 96 mm x 96 mm ) |
| 15 | Digital type |
| 16 | SF of CT operated direct reading type ampere meter on existing panel, making connection by PVC insulated copper conductor with PVC sleeves/ channel etc. as required. Analog type 96mm x 96mm |
| 17 | Below 500 A |
| 18 | SF of selector switch for voltmeter (4 position) including making connection etc. as required |
| 19 | SF of CI linked selector switch of 10 A for ampere meter (4 position) including making connection etc. as required |
| 20 | SF of 240/220 V, LED (22.5mm dia) pilot lamp with integral circuit, terminal block including connection etc. as required Red/Yellow/Green colour |
| 21 | Supply & Fixing of ISI marked three core PVC flat submersible cableas per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc. |
| 22 | 3 core 6.0 Sq.mm |
| 23 | 3 core 10.0 Sq.mm |
| 24 | Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved makein ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. |
| 25 | 16.0 Sq.mm, 4 core |
| 26 | 25.0 Sq.mm, 3.5 core |
| 27 | P & F thermal over load relay with built in single phase protection and having at least 1NO & 1NC contacts, manual /auto reset facility including making connection testing etc. as required. |
| 28 | Up to 14 Amp |
| 29 | 15 to 20 Amp |
| 30 | 21 to 30 Amp |
| 31 | 31 to 40 Amp |
| 32 | Supplying and making one end termaination with heavy duty single compression brass gland SIBG type aluminium lugs duty crimped with crimping tool, PVC tape etc. for following size of armoured PVC insulated & PVC sheated/ XLPE alumiumum conductor cable of 1100 volt grade as required of size |
| 33 | 3 x 4.0 Sq.mm |
| 34 | 3 x 6.0 Sq.mm |
| 35 | 3 x 10.0 Sq.mm |
| 36 | 3 x 16.0 Sq.mm |
