Constructing 200 Mm Rcc Underground Gutter At Anjangaon (U) 02. Constructing Water Supply Scheme To Murum Khande Wasti, Anjangaon Umate Name Of Work: 03. Constructing 200 Mm Rcc Underground Gutter Repairing At Dalitwastianjangaon Umate 04 Constructing Wat
Tender Overview
Project Description
Constructing 200 mm RCC Underground Gutter At Anjangaon (U) 02. Constructing Water Supply Scheme to Murum Khande Wasti, Anjangaon Umate Name Of Work: 03. Constructing 200 mm RCC Underground Gutter repairing At DalitwastiAnjangaon Umate 04 Constructing Water Supply Scheme At ( Magaswargiy Wasti )Anjangaon Umate. 05 Plastic v kachra Sankalan At Anjangaon Umate 06.Providing Water Supply Scheme at Dalit Wasti Anjangaon U 07. 07.Constructing Water Supply Scheme to BhairavnathWasti, Anjangaon Umate. Tal. Madha Dist.Solapur.
BOQ
| Sl. No. | Item Description |
| 1 | Name Of Work: 01.Constructing 200 mm RCC Underground Gutter At Anjangaon (U) Tal. Madha Dist.Solapur. |
| 2 | ( Sandpani Ghankachra Vyavsthapan Karane ) |
| 3 | Item No. 1 :- Excavation for foundation / pipe trenches in earth soils of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 meters and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete (lift 0 to 1.5 M) For 200 mm RCC Pipe |
| 4 | Item No. 2 :- Excavation for foundation / pipe trenches in hard murum including removing the excavated material up to a distance of 50M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.(lift 0 to 1.5M) |
| 5 | Item No. 3 :- Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt roadincluding removing the excavated material up to a distance of 50 metersand lifts as below, stackingand spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete (lift upto0 to 1.5 M) |
| 6 | Item No. 5 :- Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. |
| 7 | Item No. 6 :-Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no.4985/1988 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores andincluding cost of jointing material i.e. solvent cement, etc. complete.90 mm Dia. PVC4 Kgcm2 |
| 8 | Item No. 7 :-Lowering, laying and jointing PVC pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, giving satisfactory hydraulic testing as per IS code, etc. complete. 90 mm Dia. PVC4 Kgcm2 |
| 9 | Item No. 6 :-Providing ISI standard RCC Pipes in standard lengths of following class & dia. Suitable for either coller joints or rubber ring joints, excluding GST levied by GOI & GOM in all respect including inspection charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988.NP 2 Type RCC Pipe. For 200 mm RCC Pipe |
| 10 | Item No. 7 :- Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost of conveyance from stores to site of work, cost of jointing material, labour, etc. complete as directed by Engineerin- charge (For all class of pipes.) as per IS- 783-1985.NP 2 Type RCC Pipe. |
| 11 | Item No. 8 :- Providing and constructing B/B masonary Valve Chamber with 15 cm thick 1:3:6 proportion PCC bedding additoinal excavaton B.B. masonary in CM 1:5 cm thick precast RCCFrames and Cover etc. complete as directed by engineer incharge.As above of 60 x 45 cm internal size and depth upto0.9Mwith precast R.C.C. slab cover. Size Of a Chamber 0.6x0.45x0.9 |
| 12 | Item No. 9 :- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging etc. complete. |
| 13 | GST 18 % |
| 14 | Name Of Work: 02.Constructing Water Supply Scheme to Murum Khande Wasti, Anjangaon Umate. |
| 15 | Item No.1 :- Providing and drilling 150 mm dia Borewell as per GSDA recomandation at certified site by geologist with all transportation charges of ridge including mechanical and labour charges etc.Rates As per GSDA Suggetions 2021-22. |
| 16 | Item No. 2 :- Providing and fixing P.V.C. 180 mm 6 kg/cm2 Casing pipe (With Thread) in borewell as per Is 1239 design and drawing including all transportation charges etc.Rates As per GSDA Suggetions 2021-22. |
| 17 | Item N0.3:- Providing Cap for Casing Pipe.Rates As per GSDA Suggetions 2021-22. |
| 18 | Item No.1 :-Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head anddischarge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. The pump set shall be table for direct coupling, with suitable suction strainer. Pump should havesuitable discharge out let as per manufacturer\"s design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10mm thick shall be provided with each pump. 1.50Hp Submersible Pump |
| 19 | Item No.2:- Providing & Supplying in standerd lengths Polyethelene pipes confirming to I S 4984 with Necessary jointing materials like mechanical connections I e thred/insert joints/quick relese coupler joint compression filling joint,including all taxes (central &local) transportation and frieght chrges,inspection charges loading/unloading charges,conveyance to the departmental stores/site & stacking the same in closed shade duly protecting from sunrays & rains,etc.complete.63 mm HDPE Pipe 6 Kg |
| 20 | Item No.3 :- Supplying and erecting flat flexible 3 core PVC sheathed submersible type copper cable. 4 Sq mm 3 Core |
| 21 | Item No.4 :- Supplying and erecting D.O.L. starter to operate squirrel cage induction motor on 400V 3ph H2 with no volt coil and cover Load element with necessary material and conducted to supply etc. complete. |
| 22 | Item No. 1 :- Excavation for foundation / pipe trenches in earth soils of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 meters and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete |
| 23 | Item No. 2 :- Excavation for foundation / pipe trenches in hard murum including removing the excavated material up to a distance of 50M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.(lift 0 to 1.5M) |
| 24 | Item No.3 :- Providing and laying in situ cement concrete M10 of trap/granite /quartzite/ gneiss metal for foundation and bedding including bailing outformwork, compacting,curing etc. complete.(Cement 5.90 Bags/Cum) |
| 25 | Item No.4 :- Providing uncoursed rubble masonry of trap/granite/quartzite/gneiss stones incement mortar 1:6 in foundation and plinth of inner walls / in plinth of external wall including bailing out water manually , striking joints on un exposed faces and watering etc.complete. |
| 26 | Item No.5 :- Refilling the trenches with available excavated Stuff with soft material first over pipeline and then hard material in 15 cm layer with all leads andlift including consolidation ,surcharging ,etc.complete |
| 27 | Item No.6 :-Providing andfixing screw down bib/stop tap of brass including necessary union nut, testing etc. complete. |
| 28 | Item No.7:- Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow of all tanks capacity above 1000 to 20,000 litres |
| 29 | GST 18 % |
| 30 | Name Of Work: 03. Constructing 200 mm RCC Underground Gutter repairing At Dalitwasti Anjangaon (U) Item No. 1 :- Excavation for foundation / pipe trenches in earth soils of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 meters and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete (lift 0 to 1.5 M) For 200 mm RCC Pipe |
| 31 | Item No. 2 :- Excavation for foundation / pipe trenches in hard murum including removing the excavated material up to a distance of 50M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.(lift 0 to 1.5M) |
| 32 | Item No. 3 :- Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt roadincluding removing the excavated material up to a distance of 50 metersand lifts as below, stackingand spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete (lift upto0 to 1.5 M) |
| 33 | Item No. 5 :- Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. |
| 34 | Item No. 6 :-Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no.4985/1988 including all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores andincluding cost of jointing material i.e. solvent cement, etc. complete.90 mm Dia. PVC4 Kgcm2 |
| 35 | Item No. 7 :-Lowering, laying and jointing PVC pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, giving satisfactory hydraulic testing as per IS code, etc. complete. 90 mm Dia. PVC4 Kgcm2 |
| 36 | Item No. 6 :-Providing ISI standard RCC Pipes in standard lengths of following class & dia. Suitable for either coller joints or rubber ring joints, excluding GST levied by GOI & GOM in all respect including inspection charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988.NP 2 Type RCC Pipe.For 200 mm RCC Pipe |
| 37 | Item No. 7 :- Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost of conveyance from stores to site of work, cost of jointing material, labour, etc. complete as directed by Engineerin- charge (For all class of pipes.) as per IS- 783-1985.NP 2 Type RCC Pipe. |
| 38 | Item No. 8 :- Providing and constructing B/B masonary Valve Chamber with 15 cm thick 1:3:6 proportion PCC bedding additoinal excavaton B.B. masonary in CM 1:5 cm thick precast RCCFrames and Cover etc. complete as directed by engineer incharge.As above of 60 x 45 cm internal size and depth upto0.9Mwith precast R.C.C. slab cover. Size Of a Chamber 0.6x0.45x0.9 |
| 39 | Item No. 9 :- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging etc. complete. |
| 40 | GST 18 % |
| 41 | Name Of Work:04 Constructing Water Supply Scheme At ( Magaswargiy Wasti )Anjangaon Umate.Item No.1 :- Providing and drilling 150 mm dia Borewell as per GSDA recomandation at certified site by geologist with all transportation charges of ridge including mechanical and labour charges etc.Rates As per GSDA Suggetions 2021-22. |
| 42 | Item No. 2 :- Providing and fixing P.V.C. 180 mm 6 kg/cm2 Casing pipe (With Thread) in borewell as per Is 1239 design and drawing including all transportation charges etc.Rates As per GSDA Suggetions 2021-22. |
| 43 | Item N0.3:- Providing Cap for Casing Pipe.Rates As per GSDA Suggetions 2021-22. |
| 44 | Item No.4:- Yield testing charges on successfully borewell measure by 90 degree V Notchetc.complete.Rates As per GSDA Suggetions 2021-22. |
| 45 | Providing, erecting and giving test of submersible monoblockpump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer\"s design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump.Submersible monoblock pumpset 3.00 BHP 150 mm Dia |
| 46 | Supplying and erecting flat flexible submersible with copper conductor PVC Insulated flexible cable and pvc sheeted as per I.S 694/1990 of following grade up to 1100 volts3 core 4sqmm |
| 47 | Supplying and erecting D.O.L.Starter to operate squirrel cage induction Motor Workig on 380-400 V.3 Phase 50 Htz with no volts coil and overload element andPush Button with necessary material and connected to supply etc. complete .Starter with orignal sheet encloser. |
| 48 | Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V having accuracy class of 0.5 ,AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer |
| 49 | Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A having accuracy class of 0.5, AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer. |
| 50 | Panel Fabrication -Supplying and erecting selector switch suitable for voltmeter/ammeter for 3phase AC supply 500V, 50Hz, on provided box / panel and duly connecting withnecessary PVC wire leads and lugs.MSsheet of thickness given below to be used for fabrication of boxes. Panel board etc. including cutting, bending, drilling, welding, cleaning, degusting and painting with one coats of red lead paint andtwo coats of enamel paint |
| 51 | Supplying and erecting set of three pilot Lamp indicating camp with lead colors red/yellow /Blue 230/250 Volt on provided Box /Panel with necessary wiring material connection etc. |
| 52 | Supplying and erecting bank of all polyproulen condenser with the standard capacities of 2,3,5,7,12.50,15,20 and 25 KVAR units of P.F connection for operation on 3 Phase 50 Hz 400 Volts (+/- 10%)J with externally discharging resistance earthling terminals |
| 53 | Providing, Lowering, laying and Jointing HDPE.pipes of following Dia and Class in proper position grade, alignment as conveyance to site of work, cost of jointing material, labour, giving satisfactory hydraulic test etc. ( 90MM 244+67=311110MM 354+70=424 140MM 610+107=717160MM 790+116=906180MM 994+116+1110.)Complete.[DSR2021-22 P.No. 82/I.No |
| 54 | Supplying and erecting \"B\" class G.I Bend pipe in Position necessary material.75 mm dia G.I BendSupplying 415+lowering 40=455 |
| 55 | Supplying & erecting fuse bridges with base HC type fuse links 240V, 63A erected on polished wooden block. |
| 56 | GST 18 % |
| 57 | Name Of Work:-05 Plastic v kachra Sankalan At Anjangaon Umate Tal.Madha Dist Solapur COMMUNITY COMPOST PIT (SMALL) 4 Nos. Excavation in foundation /pipe trenches in earth soils of all types sand,gravel and soft murum including removing the excavated material up to a distance of 50 Mt. and lift as below ,stacking and spreading as directed,normal dewatering prepairing the bed for foundation excluding backfilling etc.complete. |
| 58 | Providing and laying in situ c.c. 1:2:4 (M150) of trap/granite/quartz/geneis metal for foundation and bedding including dewatering formwork,competing and curing etc.complete. |
| 59 | providing ii class BB Mesonry with conventional bricks, in 1:6 CM insuper structure including stricking out joints watering and scafolding etc.complete. |
| 60 | Providing cement plaster in CM 1:3 OF 12 MM TH. Without neeru finish for concrete,brick and stone faces in all positions includind scafolding and curing etc. complete. |
| 61 | Providing cement pointing in C:M 1:5 for external face including racking and scafolding etc. cmplete. |
| 62 | providing external washable powder distemper paint to all type of plastered/pointing sufaces including curing etc. complete |
| 63 | providing supplying MS sheet and angal fabricated board with size .45 Mt.X .600 Mt. with 2.0Mt. angal legs including fixing in concrete and painting as per instructions.(lumsum Amt. with local rates) |
| 64 | COMMUNITY COMPOST PIT (SMALL) 1 Nos. Excavation in foundation /pipe trenches in earth soils of all types sand,gravel and soft murum including removing the excavated material up to a distance of 50 Mt. and lift as below ,stacking and spreading as directed,normal dewatering prepairing the bed for foundation excluding backfilling etc.complete. |
| 65 | Providing and laying in situ c.c. 1:2:4 (M150) of trap/granite/quartz/geneis metal for foundation and bedding including dewatering formwork,competing and curing etc.complete. |
| 66 | providing ii class BB Mesonry with conventional bricks, in 1:6 CM insuper structure including stricking out joints watering and scafolding etc.complete. |
| 67 | Providing cement plaster in CM 1:4 OF 12 MM TH. Without neeru finish for concrete,brick and stone faces in all positions includind scafolding and curing etc. complete. |
| 68 | Providing cement pointing in C:M 1:5 for external face including racking and scafolding etc. cmplete. |
| 69 | providing external washable powder distemper paint to all type of plastered/pointing sufaces including curing etc. complete |
| 70 | GST 18 % |
| 71 | 06.Providing Water Supply Scheme at Dalit Wasti Anjangaon U Item No. 1 :-Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head anddischarge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. The pump set shall be table for direct coupling, with suitable suction strainer. Pump should havesuitable discharge out let as per manufacturer\"s design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10mm thick shall be provided with each pump. (Electric/Mech. DSR 2021-22 Pg No.01 PM 1-1-2 1.5 Hp Submersible Pump |
| 72 | Item No.2:- Providing & Supplying in standerd lengths Polyethelene pipes confirming to I S 4984 with Necessary jointing materials like mechanical connections I e thred/insert joints/quick relese coupler joint compression filling joint,including all taxes (central &local) transportation and frieght chrges,inspection charges loading/unloading charges,conveyance to the departmental stores/site & stacking the same in closed shade duly protecting from sunrays & rains,etc.complete.63 mm HDPE Pipe 6 Kg HDPE 32 mm 6 kg |
| 73 | Item No. 3 :- Supplying and erecting B class G.I. bend in position with necessary materials. |
| 74 | Item No. 4 :- M.S. sheet of thickness given below to be used for fabrication of boxes panel boards etc. including cutting bending drilling welding cleaning derusting and painting with one coat of red lead paint and two coats of enamel paint. 16 SWG |
| 75 | Item No. 5 :- Supplying and erecting flat flexible 3 core PVC sheathed submersible type copper cable. 4 Sq mm 3 Core |
| 76 | Item No. 6:- Supplying and erecting D.O.L. starter to operate squirrel cage induction motor on 400V 3ph H2 with no volt coil and cover Load element with necessary material and conducted to supply etc. complete. |
| 77 | Item No.7:-Providing and Supplying Sandry Material as Directed...etc completed |
| 78 | GST 18 % |
| 79 | Name Of Work: 07.Constructing Water Supply Scheme to BhairavnathWasti, Anjangaon Umate. |
| 80 | Item No.1 :- Providing and drilling 150 mm dia Borewell as per GSDA recomandation at certified site by geologist with all transportation charges of ridge including mechanical and labour charges etc.Rates As per GSDA Suggetions 2021-22. |
| 81 | Item No. 2 :- Providing and fixing P.V.C. 180 mm 6 kg/cm2 Casing pipe (With Thread) in borewell as per Is 1239 design and drawing including all transportation charges etc.Rates As per GSDA Suggetions 2021-22. |
| 82 | Item N0.3:- Providing Cap for Casing Pipe.Rates As per GSDA Suggetions 2021-22. |
| 83 | Item No.1 :-Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head anddischarge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. The pump set shall be table for direct coupling, with suitable suction strainer. Pump should havesuitable discharge out let as per manufacturer\"s design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10mm thick shall be provided with each pump. 1.50Hp Submersible Pump |
| 84 | Item No.2:- Providing & Supplying in standerd lengths Polyethelene pipes confirming to I S 4984 with Necessary jointing materials like mechanical connections I e thred/insert joints/quick relese coupler joint compression filling joint,including all taxes (central &local) transportation and frieght chrges,inspection charges loading/unloading charges,conveyance to the departmental stores/site & stacking the same in closed shade duly protecting from sunrays & rains,etc.complete.63 mm HDPE Pipe 6 Kg |
| 85 | Item No.3 :- Supplying and erecting flat flexible 3 core PVC sheathed submersible type copper cable. 4 Sq mm 3 Core |
| 86 | Item No.4 :- Supplying and erecting D.O.L. starter to operate squirrel cage induction motor on 400V 3ph H2 with no volt coil and cover Load element with necessary material and conducted to supply etc. complete. |
| 87 | Item No. 1 :- Excavation for foundation / pipe trenches in earth soils of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 meters and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete |
| 88 | Item No. 2 :- Excavation for foundation / pipe trenches in hard murum including removing the excavated material up to a distance of 50M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.(lift 0 to 1.5M) |
| 89 | Item No.3 :- Providing and laying in situ cement concrete M10 of trap/granite /quartzite/ gneiss metal for foundation and bedding including bailing outformwork, compacting,curing etc. complete.(Cement 5.90 Bags/Cum) |
| 90 | Item No.4 :- Providing uncoursed rubble masonry of trap/granite/quartzite/gneiss stones incement mortar 1:6 in foundation and plinth of inner walls / in plinth of external wall including bailing out water manually , striking joints on un exposed faces and watering etc.complete. |
| 91 | Item No.5 :- Refilling the trenches with available excavated Stuff with soft material first over pipeline and then hard material in 15 cm layer with all leads andlift including consolidation ,surcharging ,etc.complete |
| 92 | Item No.6 :-Providing andfixing screw down bib/stop tap of brass including necessary union nut, testing etc. complete. |
| 93 | Item No.7:- Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler andbuilt corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow of all tanks capacity above 1000 to 20,000 litres |
| 94 | GST 18 % |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender