Tender For Construction Work Of Asphalt Road And Bt Recarpeting At Mansha Chowk And Various Places In Bkt Area.
Tender Value
1.97 Crore
Estimated cost
Bid Submission
04 Apr 2025
0 days left
EMD
3.95 Lakhs
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhiwadi → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Work Of Asphalt Road And Bt Recarpeting At Mansha Chowk And Various Places In Bkt Area.
BOQ
| Sl. No. | Item Description |
| 1 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 Tonne to meet requirement of Table 300-2 including cost of compensation for earth taken from private land with ALL lead As per MoRTH specification Clause No. 305. |
| 2 | Providing and laying granular sub-base material having P.I.not more than 6, including spreading in layers not exceeding 150 mm compacted thicknessand consolidation by 8-10 tonne power rollerto required camber and grade including cost of water and hire charges of machinery, including T&P with all lead (Compacted thickness to be measured).as per MORTH specification table 400-1, 400-2 : For grading-I with CBR value not less than 30. to attain 100% proctor density. |
| 3 | Providing, laying, spreadingand compactingstone aggregate of as per table 400-10 and 400-11Wet Mix Macadam specification including premixing the material with water to OMC inwet mix plant as per approved design mix, carriage of mixed material by Tipper to site laying in uniform layers with motor grader/F.E.Loader/paver finisher, in sub base/ base course on a well prepared under base and compacting with vibrotry roller to achieve the desired density including lighting, guarding, barricading and maintance of diversion etc. (MoRTH specification : Clause 406) by mechanical mean with all lead . |
| 4 | Providing and laying Dense Bituminous Macadam on prepared surface with specified graded crushed aggregates as per table 510 and design mix for base/binder course including loading o fmaterial with F.E loader heating of binder aggregate and filler in approved hot mix plant as per clause 6.5 of manual transporting the mixed material by tippers and laying with sansor paver finisher as per clause 507.3.5 to the required level and grade rolling by selfpropelled power rollers and vibratory rollers or pneumatic tyred roller 150-250KN.TP=0.7 MPa to achieve the desired density (approved by the department) but excluding costofprimer /tackcoat. [MoRTH Specification :Clause507, 112] including anti stripping agent with all lead. GradingII (19mm nominalsize)- Bitumen@ minimum4.5% of mix (VG-30 grade) & thickness 50 - 75 mm |
| 5 | Providing and laying bituminous concrete as per design mix on preparedsurface with specified graded stone as per table 500-18 for wearing course including loading of aggregate with F.E loader and hot mixing of binderand 2% cement filler with aggregates in approved hot mix plant as per clause 6.5 of manual Transporting the mix material with tipper to paver and laying with sensor paver finisher (as per clouse 507.3.5) to the required level , grades and rolling with vibratory compactor and pneumatic tyred roller 150-250 KN,TP=0.7 Mpa, to achieve the desired density (approved by the department) excluding cost of primer/tack coat (MORTH Specification : Clause -509,112) including Antistripping Agent. Grade-I Bitumen @ minimum 5.5 % of mix VG 30 |
| 6 | Providing and applying primer coat over prepared surface or granular base with bitumen emulsion(SS-1)as per IS: 8887 & manufacturer’s specifications @ 7 kg /10 sqm with a self propelled of towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MORTH specification CI 502,112 ( Including cleaning of road surface ) |
| 7 | Providing and applying tack coat on the prepared surface ,withbitumen emulsion (RS-1) as per IS : 8887 & manufacturer’s specifications @ 2.25 kg /10sqm. With a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MORTH specification CI.503,112 ( Including cleaning of Road Surface ) |
| 8 | Providing and laying of hot applied thermoplastic compound inclusive type I reflectrosing glass beads as per table 800-3, 800-4 applied in uniform thickness of at least 2.5 mm and spread uniformly with reflectorising glass beads type II in addition @ 250 gms per Sqm with a road marking machine as per IRC: 35 complete with traffic diversion arrangement as per MORTH specification clause 803.4. |
| 9 | Providing & fixing Two way reflective metal body raised road studs with anchor with shank 100x100x19.8 and 2x43 pieces special reflective elements 19 degree tilted etc. complete made by swareflex at 9 m. centre to centre on edge lenes, lane lines and 1 m. centre to centre on pedestrai crossing including fixing, cost of conveyance of all materials to site including labour and hire charges for machineries involved etc. complete as per standard specifications and directions of the Engineer-in-charge.. |
| 10 | Removal of existing sealant and re-sealing of contraction, longitudinal or expansion joints in concrete pavement with fresh sealant material hot poured rubberised bitumen or cold polysulphide type as per Clause 602.2.8 with appropriate type of primer complete as per MORTH specification Clause 3005.2.. |
| 11 | Filling pot-holes and patch repairs with bituminous concrete, 40 mm with removal of all failed material, trimmingof completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per Clause 503 back filling the pot holes with hot bituminous material using 60/70 grade bitumen 5% of total mix & mixed in hot mix plant 40-60 TPH capacity and carriage with all leads as per clause 509, compacting with smooth wheel roller 8-10 tonne, trimming & finishing the surface to form a smooth continous surface, all as per MORTH specification Clause 3004.2.- do- VG-30 -do- |
AI Tender Summary
Tender Timeline
Mar 26, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedApr 04, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 04, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender