|
| 1 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 2 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 3 | Extra for providing requiredLeather finish to flooring / skirting / Dado / Treads / Riser etc., as per architectural drawing anddirection of Engineer in charge. |
| 4 | Providing & laying, Acid and alkaline proof semi-polished machine cut Red Mandana stone of approved size and 25 mm thick for flooring over 20 to 25 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) to the pattern as per architectural drawings or as directed by Engineer-in-charge). 25 mm thick |
| 5 | Providing & fixing machine-cut & machined polished Stone in sill,copings,parapet top, window sill, planter top and such other locations, laid on 20 mm (average) thick cement mortar 1:4 (1cement:4coarse sand) including a base coat of neat cement slurry @ 4.4 kg/sqm and jointed with grey cement slurry mixed with pigment to match the shades of the slabs, including rubbing and polishing complete.The Stone used should be in one single long piece up to 1500 mm as per drawing,or as directed by Engineer-in-charge.The exposed projected edges shall be of uniform thickness and of uniform projection. Kota Stone 25 mm thick |
| 6 | Providing & fixing machine-cut & machined polished Stone in in treads of steps, sill,copings,parapet top, window sill, planter top and such other locations, laid on 20 mm (average) thick cement mortar 1:4 (1cement:4coarse sand) including a base coat of neat cement slurry @ 4.4 kg/sqm and jointed with grey cement slurry mixed with pigment to match the shades of the slabs, including rubbing and polishing complete.The Stone used should be in one single long piece up to 1500 mm as per drawing,or as directed by Engineer-in-charge.The exposed projected edges shall be of uniform thickness and of uniform projection. Mandana Stone 25 mm thick |
| 7 | Extra for providing edge moulding to Kota stone/ dholpur stone / Red sand stone/ Mandana stone (up to 30 mm thick)counters, vanities, coping, window sill, parapet tops and such other locations including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.Kota Stone / Mandana stone ( in uniform thickness ) |
| 8 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of sizeSize of Tile 600 x 600 mm |
| 9 | Extra over & above item of vitrified tile flooring, for fixing tile, using admixtureLaticrete 3642 of Laticrete or admixture E 135 of Ardex Endura or equivalent admixture in proportion (50 kg cement+200 kg sand+3 litreadmixture ) with cement mortar 1:4 (1 cement: 4 coarse sand) complete as per manufacturer specification and as per direction of Engineer-in-Charge. ( only Cost of admixture is paid under this item ) |
| 10 | Providing and laying Ist quality full body glazed vitrified tiles of size 300mm x 600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.Make: -Kajaria - The Trend Eternity series , Johnson- Porcelano series, Somany : Duragress |
| 11 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 12 | Providing & fixing machine-cut & machined polished Stonein treads of steps, sill,copings,parapet top, window sill, planter top and such other locations, laid on 20 mm (average) thick cement mortar 1:4 (1cement:4coarse sand) including a base coat of neat cement slurry @ 4.4 kg/sqm and jointed with white cement slurry mixed with pigment to match the shades of the slabs, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all level .The Stone used should be in one single long piece up to 1500 mm as per drawing,or as directed by Engineer-in-charge.The exposed projected edges shall be of uniform thickness and of uniform projection.( Basic rate of granite is 2000/- per sqm )Granite stone 18 mm thick ( Desert Gold, Amba white, Nosera Green ) |
| 13 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent |
| 14 | Providing and laying18 mm thickmirror polished machine cut approvedquality Granite stone of required size & shape (length and width of the stone slab), approved shade, colour and texture in approved pattern inskirting , dado, risers of steps and such other locationof uniform colour, texture and pattern over 12 mm thick cement mortar 1:3 ( 1 part cement : 3 part coarsesand ) withcement paste @ 4.4 Kg/SqMfilling of joints with white cement mixed with matching colour pigments ,necessary curing, polishing, protection of finished surface, cleaning the same finallyetc. complete as directed.The riser of steps used should be in one single long piece up to 1800mm length as per the drawing. (Only finished granite work shall be measured & considered for payment.( Basic rate of granite is 2000/- per sqm )Granite stone 18 mm thick ( Desert Gold, Amba white, Nosera Green ) |
| 15 | Extra for making antiskid grooves on steps by making band of 2 nos. chisel dressed grooves, 20 mm wide & 2mm deep along the length of steps withstone cutting machine including grinding and polishing etc. completeas required ( length of grooveto measured for payment in running meter).Granite Stone |
| 16 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black, Cherry/Ruby redArea of slab over 0.50 sqm |
| 17 | Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. |
| 18 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 19 | Mirror polishing on marble work / Granite work / stone work where ever required to give high gloss finish complete. |
| 20 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering up to 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part ISaint Gobain , Lafarge or approved equivalent |
| 21 | Providing & fixing Techzone ceiling system by using 0.7 mm Aluminium lay-in plain ceiling tiles(Armstrong or approved equivalent) as per specification given below:The Techzone ceiling system has a ceiling module with technical spacing as per drawing. The Techzone orientation is such that the main runners run perpendicular to the technical zone. Metal Aluminium field panel is of size 600X1200/600 mm. The 1200 x150 mm technical zone formed is where the technical elements like lighting fixtures & air diffusers would be installed. Armstrong ALUMINUM Layin Plain metal ceiling Lay in tiles in 0.7 mm thick Aluminum pre coated to Global white color to be laid on Armstrong grid systems with 15mm wide T - section flanges color white having rotary stitching onthe Main Runner, 1200 mm & 600 mm Cross Tees.The tiles would have Fire Performance of Class A2-s1.d0 as per EN13501 standard in module size of 600 X 600/1200mm as per drawing, suitable for Green Building application, with Recycled content of 50%.The grid should be of “Armstrong” make with 15mm wide T - section flanges color white having rotary stitching on all T sections i.e. the Main Runner with C3 coupling, 1200 mm & 600 mm Cross Tees with Hardened XL2 Clip having a web height of 38 mm and a load carrying capacity of 14 Kgs/M. The T Sections have a Galvanizing of 90 grams per M2 having pull out strength of 100 Kgs. Suspension system for Armstrong grid to be of Armstrong make.Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Installation to be carried out by Armstrong Trained Installation team & Installation should be carried out as per Armstrong recommended procedure.Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centers.\"ARMSTRONG SUSPENSION SYSTEM accessories manufactured and supplied by Armstrong World Industries consisting of M6 Anchor Fasteners with Vertical Hangers made of Galvanized steel of size 26x 26 x 25 x 1.2mm with a Galvanized Thickness of 80gsm, A pre Straightened Hanger wire of dia – 2.65mm of 1.8 m length., thickness of 80gsm and a tensile strength of 344-413 MPa, along with Adjustable hook clips of 0.8mm thick, galvanized spring steel for 2.68 mm. The adjustable clip also consists of a3.5 mm aquiline wire to be used with the main runner.\"Make : 0.7 mm Aluminium lay-in plain ceiling tiles with Techzone ceiling system of Armstrong World Industries |
| 22 | Providing and fixing 6 mm thickbeveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per drawing |
| 23 | Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. |
| 24 | 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) |
| 25 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) |
| 26 | 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) |
| 27 | Cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement.20 mm cement plaster |
| 28 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers |
| 29 | Providing and fixing approved galvanized chicken wire mesh (24 gauge 12 mm size) to junction of concrete and masonry work and other locations where called for at all the heights with necessary scaffolding etc.including cutting to required sizes, side laps of minimum 75 mm and fixing in position with galvanized wire nails as approved complete. |
| 30 | Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2(1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately). |
| 31 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 32 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.Two Coats |
| 33 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 34 | For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) |
| 35 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 36 | For LouveredAnodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 37 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 38 | Providing and fixing Single point locking handles without Key of approvedmake &approved powder coated to required colour or shadeincluding the cost of screw and other incidental charges complete as per manufacturers specification. Make : PL 205H of PULSE ( LGF Sysmac ( I ) Pvt Ltd / HD 03 of PEGO |
| 39 | Providing and installing in position frameless glass partition with 12 mm thick clear toughened float glass of Saint gobain or equivalent with appropriate stainless steel grade 304 patch fittings as per manufacturer\"s specification ( Dorma or approved equivalent ) or using Dorma make SS finish Wall Connecting Profile base rail with fixing holes incl. clamping parts with screws and gasket for 12mm glass with cover profile on both sides, as per design & approved shop drawingsincluding filling the joints with Silicon sealant structural grade and weathering grade of Dow corning - USA or \"GE Silicon - USA\" or \"WACKER - Germany\"., complete as per detailed drawings & approved shop drawings. (Installed glass area shall be measured). |
| 40 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately).For the purpose of measurement the entire treated surface will be measured. |
| 41 | Providing & fixingwhite vitreous china wall hung type European type water closetwith C.P. bolts, nuts, C.I. chair or other hanging arrangement, with white solid plastic seat and cover with lid, C.P. brass hinge rubber buffers, with accessories,C.I/M.S. brackets painted with two coats of enamel paint of approved shade over a coat of primer. C.P. brass screws and wooden cleats, including cutting and making good the wall and floors wherever required Make: Hindware (WC ELEMENT Model no.92081), CERA (Model No: CATO Cat No:\"S1043118\", JAQUAR Model No: WC_ARS-WHT-39951 |
| 42 | Providing and Fixing Concealed in wall Flushing Cistern with dual flush Actuator Plate (plastic body in approved finish), flush-stop function, noise less float valve and fast filling action with all component parts of high quality including fixing frame and set complete in all respects as per direction of the engineer-in-charge.Make: (Hindware \"CONCEALO\" ), (Cera \"CHEVRON\" B1110101 ), (JAQUAR JCS-WHT-2400S & JCP-CHR-152415 ) |
| 43 | Providing and Fixing White vitreous china Under counter wash basin with C.I. brackets painted white, 32mm dia. C.P. waste, C.P chain and rubber plug, C.P. cast brass bottle trap with C.P. connecting pipe to wall and C.P wall flange and rubber adapter for waste connection complete includingcutting and making goodthe wallswherever requiredMake: (Hindware \"GARNET\" 10080), (Jaquar FNS-WHT-40701), (CERA CAMRY S20301014) |
| 44 | Providing and Fixing vitreous china urinal with in built Bottle Trap, C.I.hangers, 15mm dia inlet to built in spreaders with inbuilt waste with C.P flange, completeincluding cutting and making good the walls and floors wherever required Make: (HINDWARE \"DYNA\" 60010), (CERA \"CARAVAN\" S4020105), (JAQUAR- URS-WHT-132530) |
| 45 | Providing and Fixing electrical operated concealed automatic flushing system forurinals,including front S.S plate 125 x 125mm chrome sensor with CP brass body, ball valve etc,complete in all respectincluding cutting and making good the walls wherever required .Make: (EURONICS EU 04 BE), (HINDWARE 500963), (JAQUAR SNR-STL-51083) |
| 46 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.Granite Stone of approved shade |
| 47 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :510x1040mm bowl depth 200 mm (Kichen sink with drain board) |
| 48 | Providing and Fixing central hole C.P. brass Sink Cock including cutting and making good the walls wherever required complete in all respects as per direction of the Engineer-in-charge. Make: (Jaquar 5357 N), (CERA F1014311), (BATHLINE 2849) |
| 49 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. Make: (Jaquar ALD 769L), (CERA F80604001), (BATHLINE 5001) |
| 50 | Providing and fixing Chrome plated Health Faucet with 8 mm dia, 1 Meter long Flexible tube & wall hook including cutting and making good the walls wherever required complete as per instructions of the engineer-in-charge Make: (HINDWARE F160023CP), (BATHLINE HF-1812), (CERA F8030103) |
| 51 | Providing and Fixing C.P.brass towel ring \"Round\" fixedtoPVC cleats with C.P.brass screws includingcutting and making good the walls wherever required Make: (JAQUAR ACN 1121BN), (BATHLINEPR-05), (HINDWARE F880007) |
| 52 | Providing & fixing CP brass self closing pillar cock for Wash Basin including cutting & making good the walls wherever required complete in all respects as per Engineer-in-chargeMake: (JAQUAR PRS CHR 031), (BATHLINE 4916). (CERA F9020101) |
| 53 | Providing & fixing CP brasselbow action pillar cockfor lab sink including cutting & making good the walls wherever required complete in all respects as per Engineer-in-charge.Make:(JAQUAR CHR 5031 N), (VIJAY CAT NO: 1057) |
| 54 | Providing and fixing SS liquid soap dispenser with push lever assembly with soap refill fixed in wall with Screws complete in all respect as per direction of the engineer-in-charge Make:(UTEC UT-3100), (EURONICS ES-05), (TOSHI A-500) |
| 55 | Providing and Fixing 15mm C.P. brass angle valve with wall flange and C.P copper connecting pipe 450 mm long nut and rubber, washer with C.P. brass flange complete, including cutting and making good the walls, wherever required Make:(JAQUAR FLR-CHR-5053 N), CERA F2002201), (BAHTLINE 3011A) |
| 56 | Providing and Fixing 15mm C.P brass bib cockcomplete, including cutting and making good the walls wherever required.Short bodyMake:(JAQUAR CON-037 KN), (CERA F2006151), (BATHLINE 2001) |
| 57 | Providing and fixing toilet paper holder :C.P. brass |
| 58 | Providing and fixing UPVC SWR soil, waste and vent pipes of approved make of6kg./cm2 conforming to IS: 13592 Type \"B\" including all fittings i.e bends, junctions, cowls,offsets,etc., and jointing with solvent cement including cutting holes inwalls and floors, wherever required and making good the same, complete as directed by the Engineer-in-Charge.110mmouter dia. |
| 59 | Providing and Fixing SS Grating with frame and SS Screws casted heavy duty 125-150 mm dia including cutting and making good the walls and floors wherever required complete in all respects . |
| 60 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. |
| 61 | 15 mm nominal outer dia Pipes |
| 62 | 20 mm nominal outer dia Pipes |
| 63 | 25 mm nominal outer dia Pipes |
| 64 | Providing and fixing UPVC pipes as per ASTM D-1785, Schedule 40,including all fittings with or without offsets, PVC pipe clips/ holders, specials etc. and jointing with ruber rings and cement solvent as per ASTM D 2564, and all complete provisions including testing and commissioining,as directed by the Engineers-In-charge and as per approved specifications. (For Water Supply Pipes). EXPOSED AREA |
| 65 | 20mm dia Nominal Bore |
| 66 | 25mm dia Nominal Bore |
| 67 | 32mm dia Nominal Bore |
| 68 | 40mm dia Nominal Bore |
| 69 | 50mm dia Nominal Bore |
| 70 | 65mm dia Nominal Bore |
| 71 | 80mm dia Nominal Bore |
| 72 | Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete : |
| 73 | 15 mm nominal bore |
| 74 | 20 mm nominal bore |
| 75 | 25 mm nominal bore |
| 76 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : |
| 77 | 65 mmnominal bore |
| 78 | 80 mm nominal bore |
| 79 | Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS standard 3448 complete with press type fitting (fitting shall be paid for separately) i/c fixing of the pipe with clamps at 1.00 m spacing including cutting and making good the walls including testing of joints complete as per direction of Engineer-in-charge.(The pipe length inserted in the fitting shall not be measured for payment) |
| 80 | 15.88 mm outer dia pipe |
| 81 | 22.22 mm outer dia Pipe |
| 82 | 28.58 mm outer dia Pipe |
| 83 | 34.00 mm outer dia Pipe |
| 84 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished witha floating coat of neat cement complete as per standard design : |
| 85 | Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions,total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 86 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.0 mm thick. |
| 87 | Providing and fixing bright finished brass butt hinges with necessaryscrews etc. complete :125x85x5.5 mm (heavy type) |
| 88 | Providing and fixing Surface mounted door closer of approved quality with necessary accessories and screws all complete as per detailed Architectural Drawings and as directed by Engineer-in-charge : Manufacturer\"s warranty/guarantee card needs to be submitted, installation has to be certified by the Manufacturer in writing.Make: Dorma TS 68 Door Closer with Std Arm, Hafle:- 499.30.002, GEZE 1010001 : |
| 89 | Providing and fixing satin stainless steel grade 304 pull handle 19mm dia x 200mm length of approved qualityincluding the cost of necessary stainless steel screws and other incidental charges complete as per detailed Architectural Drawings and as directed by Engineer-in-charge : Manufacturer\"s warranty/guarantee card needs to be submitted.Make: Dorma : TGDI-D 200, Hafle:- 903.01.602, GEZE 98163078 |
| 90 | Providing & fixing 55 mm Backset dead lock with Euro Profile Cylinder with both side Key operation including strike plate & escutcheons, of approved quality with necessary accessories and screws etc. all complete as per detailed Architectural Drawings and as directed by Engineer-in-charge : Manufacturer\"s warranty/guarantee card needs to be submitted, installation has to be certified by the Manufacturer in writing.Make:- Dorma : 706 Dead lock type 2 package (60mm EPC), (Hafle 911.22.551 and 916.96.006 + 903.99.664 ) |
| 91 | Providing & fixing satin stainless steel lever handle with rose , mortice bathroom lock with 55 mm backset & strike plate, bathroom escutcheons with indicator & spindle8mm x 100 mm, of approved quality with necessary accessories and screws etc. all complete as per detailed Architectural Drawings and as directed by Engineer-in-charge : Manufacturer\"s warranty / guarantee card needs to be submitted, installation has to be certified by the Manufacturer in writing.Make:- ( Dorma : Pure 8100 Series type 3, Hafle 911.02.149 + 902.53.922 + 909.00.721 + 903.92.586, GEZE : 98484003+98482004+98482003) |
| 92 | Providing and fixing Satin stainless steel wall mounted Door Stopper with rubber bufferof approved quality with necessary SS screws etc. all complete as per detailed Architectural Drawings and as directed by Engineer-in-charge : Manufacturer\"s warranty/guarantee card needs to be submitted.Make: Dorma : 4012 Hafle:- 937.13.530, GEZE : 98307002 |
| 93 | Providing and fixingstainless steel brush/satin finishtower bolts including the necessary Stainless steel screws and other incidental charges complete as per detailed Architectural Drawings and as directed by Engineer-in-charge : , Manufacturer\"s warranty/guarantee card needs to be submitted.300 mm long(Dorma : 3200, Hafle 911.81.083 , GEZE 98347006 ) |
| 94 | Providing and fixingstainless steel brush/satin finishtower bolts including the necessary Stainless steel screws and other incidental charges complete as per detailed Architectural Drawings and as directed by Engineer-in-charge : , Manufacturer\"s warranty/guarantee card needs to be submitted.150 mm long (Dorma :3200-2, Hafle 911.81.080 , GEZE : 98347009) |
| 95 | Providing and fixing minimum 25 mm dia & 600 mm length Grab Bars Satin stainless steel finish grade 304 of approved qualitywith necessary stainless steel screws and other incidental charges complete as per detailed Architectural Drawings and as directed by Engineer-in-charge : Manufacturer\"s warranty/guarantee card needs to be submitted. ( Dorma : GBDI-D 600, Gaze or approved equivalent ) |
| 96 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete asper the direction of Engineer-in-chargeWith stainless steel cover plate minimum 1.25 mm thickness |
| 97 | Providing and fixing Satin stainless steel Foot operated Door Stopper with rubber bufferof approved quality with necessary SS screws etc. all complete as per detailed Architectural Drawings and as directed by Engineer-in-charge : Manufacturer\"s warranty/guarantee card needs to be submitted. ( Dorma : 4016 / Hafele 938.04.101 ) |
| 98 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tankbody with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning anyGI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 99 | Cleaning and desilting of gully trap chamber, including removal ofrubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
| 100 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of2200 PSI for sewer line from 150mm dia upto 300mm. |
| 101 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. |
| 102 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 103 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 104 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-chargeIn cement mortar |
| 105 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm |
| 106 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 107 | Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. |
| 108 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 109 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in charge. |
| 110 | Providing One Multi Tasking Staff ( expert in Plumbing, Masonry and Carpentry Work) as per directions of Engineer-in-Charge). |
| 111 | Cleaning of roof terrace and rainwater spoutby broom and necerary required tools including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
| 112 | Supply and Fixing of roller blinds for different window sizes along with all necessary fabrics and mechanism / operating system including rod, chain and brackets etc. complete all as directed by engineer in charge.(The blind fabric shall be of NOVA/SHADE or equivalent make and Operating system / Mechanism shall be of ORION/UNISOL or equivalent make.) |
| 113 | Providing and Fixing Frosted Film ISI marked as per approved direction of Engineer-in-charge. |
