|
| 1 | Material & Labour for Supply and Laying or Passing through Pipe; Armoured HT Cable, Stranded Compacted Circular Aluminum Conductor, Conductor Screen with Extruded Semi Conducting Compound, XLPE Insulated, Insulation Screening with Exrtuded Semi Conducting Compound in combimation with Copper Tape, Core Laid Up, Innersheath of PVC, Galvanised Steel Flat Strip Armoured & Overall PVC Sheathed Cable Confirming to IS 7098 (Part-2) 2011 with upto Date amendments, Size: 3 Core x 240 sqmm., Voltage Grade 11000 Volts (UE). Make: Finolex/ Polycab/ Havells/ Universal/ KEI/ RPG. (Note: (a) Required 500 Mtr. in single length cable without any joint between the span and another 900 Mtr. span Cable only one straight through joint is permissible between the span. (b) Routine Test Shall be carriedout at OEM Factory in presence of FGK representative during Pre-dispatch Inspection (PDI)). |
| 2 | Material & Labour for Supply and Laying or Passing through Pipe and end termination: LT Armoured Control Cable having Solid/Stranded Copper Conductor,XLPE insulated, Core Laid Up, PVC Innersheathed, Galvanised Wire/Strip Armoured, Extruded PVC Type ST2 Outer Sheathed Confirming to IS 7098 (Part-1) 1988 with upto Date amendments, Size: 12 Core x 2.5 Sqmm., Voltage Grade 1100 Volt. Make: Finolex/ Polycab/ Havells/ Universal/ KEI/ RPG. (Note: Required 500 Mtr. in single length and another 900 Mtr. in single length, Joint between the span is not-acceptable ) |
| 3 | Material & Labour for Cable jointing kit for 11 KV (Un-Earthed) grade cable for indoor end termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 240 sqmm. Make: Raychem/3M |
| 4 | Material & Labour for Cable jointing kit for 11 KV (Un-Earthed) grade cable for outdoor straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size240 sqmm. Make: Raychem/3M |
| 5 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; in soft/loose soil for laying of pipe/cable complete all as specified. (Note:The work will be executed inside the factory premises, so that the excavation work will be done manually. Any damage during excavation work will be brone and rectified by the contractor.) |
| 6 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; in hard/dense soil for laying of pipe/cable complete all as specified. (Note: The work will be executed inside the colony area, so that the excavation work will be done manually. Any damage during excavation work will be brone and rectified by the contractor.) |
| 7 | M&L for trenchless boring under the soft/loose or hard/dense soil, building/wall/road/culvert/drain etc. and lay the pipe/cable along with the trenchless bore to pass the underground cable of size 3C x 240 sq.mm & 12C x 2.5 sqmm or as specified. (Note: Any damage during excavation/ boring work will be brone and rectified by the contractor.) |
| 8 | M&L for supply and laying of GI Pipe medium grade of 150 mm bore dia (Make: Jindal/Tata/SAIL) for passing of powercable as directed. |
| 9 | M&L for supply and laying of GI Pipe medium grade of 100 mm bore dia (Make: Jindal/Tata/SAIL) for passing of control cable as directed. |
| 10 | M&L for supply and spreading of ganga sand in trenches for cushoning of cable in layer 30 cm. thick. |
| 11 | Material and Labour for brick work i.elaid dry old size brick with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius for protection of underground cable. |
| 12 | Material and Labour for supply and laying of reinforced precast concrete cable cover, class class HV, Type 1, flat, size 300mmx l80mm x 40mm with required engraving as directed. |
| 13 | Returning, filling in soft/loose soil and hard/dense soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed. |
| 14 | Demolition and dismantlingof Unreinforced Cement Concrete of any description and in any position not otherwise specifically provided for as directed. |
| 15 | M&L for Cement concrete (type C2 1:3:6, 40mm graded aggregate) in foundations, filling and mass concretefor making good of excavated cable route. |
| 16 | M&L for supply/making and fixing cable route marker with cement concrete 1:2:4: (1 Cement, 1 Coarse Sand and 4 graded stone aggregate 20mm nominal size with chicken net reinforcement) of 60cm x 60cm at the top and 30cm x 100 cm at the bottom with a thickness of 10 cm including inscription duly engraved text/letter/number and buried in ground as directed. |
| 17 | M&L for supply/fixing of Cable tag, Size: 50mm x 15mm x 1 mm. including fixing arrangement made up of stainless steel or aluminum with required embossing as directed. |
