Tender For Repair And Maintenance Works To Existing Anganwadi Building Centre Code 33626040314 At M K Nagar Ward No 10 In Rameswaram Municipality
Tender Value
3 Lakhs
Estimated cost
Bid Submission
09 Apr 2025
0 days left
EMD
3000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
rameswaram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Maintenance Works To Existing Anganwadi Building Centre Code 33626040314 At M K Nagar Ward No 10 In Rameswaram Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 2 | Removing the existing Pressed Tiles & Weathering Course at roof top of the building as directed by the departmental officers etc. |
| 3 | Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being \"32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum |
| 4 | Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete |
| 5 | Supply and delivery and fixing of 1000 Litres HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., TWAD Pg.No.85 |
| 6 | Internal Water Supply - P.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessaryscaffolding charges. |
| 7 | 20mm PVC Pipe |
| 8 | 20mm PVC Elbow |
| 9 | 20mm PVC Tee |
| 10 | Supplying and fixing in position first quality and approved variety of Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements. |
| 11 | Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another within Tamilnadu in alluvial soil sedimentary strata of clay and sandstone shale pebbles boulders etc . By first taking a pilot bore of 140mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel ,labour and drilling bentonite and waterrequired for drilling at site (site will be shown by the concerned officers) including construction of mud pit |
| 12 | Reaming 140/150mm dia pilot bore to 200mm dia as directed by the concerned departmental officers |
| 13 | Supplying and deliveryofSpecial Plain Blue Pipes for Bore Wells. The rate including cost and conveyance of materials. Complete |
| 14 | Supplying and deliveryofSpecial Slotted Blue Pipes for Bore Wells. The rate including cost and conveyance of materials and charge of slotting of pipe etc., Complete |
| 15 | Supply of 140mm dia OD PVC End cap as per special specification. |
| 16 | Labour charges for inserting140mm dia of PVC casing pipes- assembly in the drilled hole including jointing the pipes with PVC coupler with cement paste etc complete ,supply and packing the annular space with pebbles of size and quality as approved by the concerned departmental officers |
| 17 | Charges for developing Borewell with air compressor of 300CFM (100/150 PSI) capacity (minimum 8.00 hours ) including transportation , labour and fuel charges for compressor as directed by the concerned departmental officersetc complete and also conducting by V notch method |
| 18 | Supply and delivery of clear water vertical wet type submersible pump conforming to IS 8034/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase 230 V+/- 10 %,50 HZ +/-5 % |
| 19 | 1.5HP Motor |
| 20 | Supplying and fixing of panel board suitable forsubmersible motor consist of Amm meter ,Volt meter and dry run preventor etc complete as per std spn |
| 21 | 1.5 HP Motor Panel Board |
| 22 | Supplying and laying od 4 sqmm copper submersible flat cable including transporting the same to site etc complete as per std spn |
| 23 | Labour charges for the erection of1.5 Hp submersible pump set in bore well/open well including fixing and jointing submersible cable with proper clamps up to the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges up to the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventer, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pump set and trail run for 10 days. |
| 24 | Supply and Delivery of Water Supply Items specials arrangements etc complete |
| 25 | 200 mm dia MS clamp set |
| 26 | 32 mm UPVC Pipe |
| 27 | 32 mm GI Pipe |
| 28 | 32 mm dia GI union |
| 29 | 32 mm dia Non return valve |
| 30 | 32 mm dia GI H nipple |
| 31 | 32 mm dia GI elbow |
| 32 | 32 mm dia GI coupling |
| 33 | 32 mm dia GI bend |
| 34 | 20 mm dia GI Tap |
| 35 | GI Pipe 25mm |
| 36 | Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated unsheathed single core copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW Switch box with 5A FT switch inflush with wall covered with hylem sheet of 3mm thick with painting of suitable colour for Concelled PVC light point / fan point (for electronic regulator) SD 24 |
| 37 | Supply and fixing of 450mm (18\") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall SD 118 |
| 38 | Add GST18% |
AI Tender Summary
Tender Timeline
Mar 26, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedApr 09, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 09, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender