Tender For Misc/Other Maintenance Work(P/F Warning Board For Encroachment Affected Area And Direction Board In Village Salarpur) Noida - Excavating Holes More Than 0.10 Cum & Up To 0.5 Cum Including Getting Out The Excavated Soil, Then Returning The Soil, noida-Uttar Pradesh

Tender For Misc/Other Maintenance Work(P/F Warning Board For Encroachment Affected Area And Direction Board In Village Salarpur) Noida - Excavating holes more than 0.10 cum & up to 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto1.5 m. All kinds of soil. 2 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 3 Painting with synthetic enamel paint of approved brand and manufacture togive an even shade :Two or more coats on new work over an under coat of suitableshadewithordinarypaint of approved brand and manufacture. 4 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube. 5 Lettering with black Japan paint of approved brand and manufacture (DSR-16/13.71) 6 Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-chargeMandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm 7 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

INR 2832 /-

INR 110000.0 /-

INR 54.85 Lakhs /-