|
| 1 | ALUMINIUM DOOR\"SPowder coated aluminum (minimum thickness of powder coating 50 micron) |
| 2 | with float glass panes of 4.0mm thickness |
| 3 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone work work by providing weather silicon sealent over backer rod of approved quality as per achitectural drawings and direction of Engineer-in-charge complete. |
| 4 | Providing and fixing aluminium tower bolts tower isi marked anodised (anodic coating not less than AC 10 as per IS 1868) transparent of dyed to required colour shade with necssary screw etc complete. |
| 5 | Providing and fixing aluminum handle ISI marked anodised (anodic coating not less than grade AC 10 IS 1868) Transparent or dyed to required colour or shade with necessary screws etc complete |
| 6 | Providing & fixing of Aluminium Door floor stopper , ISI marked anodised ( anodic coating not less than grade AC 10as per IS:1868) transparent or dryed to required colour and shade,with necessary screws etc.complete |
| 7 | Providing & fixing of double action hydraulic floor spring of approved brand and manufacture conforming to IS :6315, havingbrand logo embossed on the body/plate with double spring mechanism and door weight up to 125kg for doors including cost of cutting floors, embending in floors are required and making good.complete as per the architectural drawings and the directions of engineer-in-charge |
| 8 | Providing and Fixing bright finished brass 100 mm mortica latch and lock ,ISI marked ,with six levers and a pair of anodised (anodic coating not less than grade AC 10as per IS:1868) |
| 9 | REPAIR AND RENOVATION WORKDismentling of old and damaged Plaster of Boundarywalland including stacking of materials as directed by Engineer-in-charge within a distance of 60 meters (200 feet). |
| 10 | Racking out joints of brick work in cement or lime mortar to depth of 1cm (3/8\") including disposal of refuse as directed by the distance of 60 meters (200 feet) |
| 11 | Remove Colour washapproved brand and manufacture and of required shade on undercoated Trush shadesurface to give an even shade over & including a priming coat with enamel paintof approved brand and manufacture such as Berger, J&N, Shalimar, Asian paints after throughly brushing the surface free from mortar droppings and other foreign matter and also includingprepairing the surface even with plaster of approved synthetic material and sand prepared smooth including cost of all materials. |
| 12 | 12mm cement plaster with cement mortar in proportion of 1:4 cement and coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm. In girth and finished even and smooth. |
| 13 | Paninting with synthetic enamel paint of approved brand andtwo coat on new surface, including cleaning of all dirt,including cost of all materials. |
| 14 | Finishing Walls with putty i/c all material labour T&P etc. |
| 15 | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undacorated wall surface to give even shade over @ 1.25 Ltr/10 sqm including one coat of primer applied @ 0.75 Ltr/10 Sqm coat curing and cost of all material, labour, T&P etc. required for proper completion of work. for two coat. |
| 16 | P/Layingbrick koba treatment with water proofing chemical with B/bat & 20mm thick plaster in 1:3 cement c/sand mortar. |
| 17 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 18 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 19 | Providing and laying Ceramic non skid floor tiles of size 300x300 mm (thicknessto be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White. Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with while cement and matching pigment etc., complete. |
| 20 | Providing and fixing PVC waste pipe for wash besin 32 mm dia . And urinal pot. |
| 21 | Providing & fixing Cp brass bib cock of approved quality conforming to IS 8931 |
| 22 | Providing and fixing gun metal gate valve with wheel of approved quality. |
| 23 | Providing and fixing PVC pipes working pressure 6 kg/sqm including testing, labour, T&P and all complete fittings |
| 24 | 15mm nominal outer dia dia |
| 25 | 25mm nominal outer dia dia |
