Tender For Construction Of Gayghat Baidari Ahatmali Via Badari Musthakam Road Km-4(800) Me 3X2.00 Meter Span Rcc Minor Bridge Ka Nirman - Dismantling Workdismantling Brick Work Or Stone Work In Lime Or Cement Mortar And Including Stacking Of Materials As , basti-Uttar Pradesh

Construction Of Gayghat Baidari Ahatmali Via Badari Musthakam Road Km-4(800) Me 3X2.00 Meter Span Rcc Minor Bridge Ka Nirman - Dismantling WorkDismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge with in a distance of 60 mt. (200 feet). As per.SI no 692 2 CULVERT WORKExcavation in foundation in ordinary soil (Loam clay or Sand) including lift up to 1.5m and lead up to 30m (100 ft) and including filling. Watering and ramming of excavated earth in to the trenches or in to the space between the structure and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer– in–charge up to distance of30.00 m (100 ft) from the foundation trenches.(Sch-251) 3 GSB Filling in foundation trenches as per drawing & Technical Specification Clause 305.3.9 4 Plain Cement concrete 1:3:6 nominal mix in foundation with crushed aggregate 40 mm nominal size mechanically mixed placed in foundation and compected by vibration including curing for 14 days. As per MORD specification 800 5 Providing and laying reinforced cement concrete M 30 gradein superstructure as per drawing and technical specifications clauses 800, 1205.4 and 1205.5 6 Supplying fitting and placing HYSD bar reinforcement in superstructure complete as per drawing and technical specification clauses 1002, 1010, 1202 7 Providing Weep holes in brick masonary / Plain / reinforced concrete abutment wing wall/ return wall with 100 mm dia AC pipe extending through the full width of the structure with slope of IV:20H towards drawing foce complete as per drawing and technical specification As per MORT&H specification 2706 & 2200 8 Drainage spouts as per drawing & technical specification as per MORT&H specification 2705 9 Filling of boulders in between Cut off wall and Raft 600 mm thick comprising of loose boulders weighing not less than 40 kg beyond curtain wall. 10 Dewatering with pumping set including etc all completion. 11 DIVERSIONConstruction of embankment with approved material obtained from available land as permitted and approved byEngineer-in-Charge and as per Technical Specitaion Clause 301.3.4.1,with all liftsand leads,spreading, grading to required slope and compacting to meet requirement of Tables 300.1and 300.2 as per Technical Specification clause 301.5 12 APPROACH Construction of embankment with approved material obtained from availble land as permitted and approved byEngineer-in-Charge and as per Technical Specitaion Clause 301.3.4.1,with all liftsand leads,spreading, grading to required slope and compacting to meet requirement of Tables 300.1and 300.2 as per Technical Specification clause 301.5 13 Construction of granular sub-base by providing well graded material spreding in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller to achive the desired density complete as per technical specification clause 401 14 Providing ,Laying ,spreading and compacting stone aggregates of 63-45 mm size to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber ,applying and brooming ,Stonescreening,binding materials to fill up theinterstices of coarse aggregate ,watering and compacting to the required density 15 Providing ,Laying ,spreading and compacting stone aggregates of 53-22.4 mm size to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber ,applying and brooming ,Stonescreening to fill up the nterstices of coarse aggregate ,watering and compacting to the required density 16 Brick edging on both sides of the road of first class bricks 8 cm (3) wide and 12 cm. ( 4.5) deep laid with mud mortar including labour & supply of bricks finish to the required template and in proper alignment and also including dressing ramming the excavated earth as directed by Engineer-in-charge. 17 Providing and applying Primer coat with bitumen emulsion on prepared (SS-1) on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.70 kg / sqm using mechanical means. As per technical specification clause 502 18 Providing and applying tack coat with VG_10 using bitumen distributor at the rate of 0.30 kg per sqm on the preparedsurface cleaned with hydraulic broom . 19 Providinglaying & rolling of open graded premix carpet of 20 mm thickness composed of 13.2mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line ,grade and level to serve as wearing course on a previously prepared base including mixing in a suitable plant,laying and rolling with a three wheel 80-100 KN static roller capacity finished to required level and grades to be followed by seal coat . 20 Providing and laying seal coat C Type sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall . 21 PROTECTION WORK Providing and laying filter material underneath pitching in slopes complete as per drawing and technical specification Clause 1302 22 Providing and laying pitching on slopes laid over prepared filter media as per drawing and technical specification Clause 1302

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	29-03-2025	NFE	Date	31-03-2025

INR 2714 /-

INR 370000.0 /-

INR 37 Lakhs /-