|
| 1 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 6 Module (200mm X 75 mm) |
| 2 | 6 Module (200mm X 75 mm) |
| 3 | 8 Module (125mm X 125 mm) |
| 4 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed Heavy class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group B |
| 5 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 6 | 1x1.5 sqmm |
| 7 | 2x2.5 sqmm |
| 8 | 2x4 sqmm |
| 9 | 2x6 sqmm |
| 10 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 11 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel /PVC conduit including dismantling as required.Group B |
| 12 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 13 | 5/6 amps switch |
| 14 | 3 pin 5/6 amps socket outlet |
| 15 | 15/16 amps switch |
| 16 | 6 pin 15/16 amps socket outlet |
| 17 | Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 25A modular socket outlet and 25A modular SP MCB \"C\" curve including connections, painting etc. as required. |
| 18 | Supplying and fixing of modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 19 | S/F of suitable size G.I. box with modular plate and cover in front or surface in recess including providing and fixing 6 pin 5/6 & 15/16A modular socket outlet and 15/16A modular switch, connection etc. |
| 20 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 185 sq. mm |
| 21 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 22 | Supplying and fixing of following sizes of Heavy duty class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 23 | 25 mm |
| 24 | 20 mm |
| 25 | Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recess steel/ PVC conduit as required. 1run of cable. |
| 26 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 12 way (4 + 36), Double door |
| 27 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole |
| 28 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps |
| 29 | Supply, installation, testing and commissioning of1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Moter, Class of Insulation: B, 3 Nos. Blades, 30 cm long down rod, 2 nos.conopies, shackle kit, safety rope, copper winding, power Factor not less than 0.9, service Value (CMM/W) minimum 6.85, Air Delivery minimum 215 CMM, 350 RPM (Tolerance as per IS:374-2019),THD less than 10%,remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut ,bolts,washers temprature rise= 75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230V, 50 Hz, single phase AC supply, earthing etc. complete as required |
| 30 | S/F of single box type fitting complete with all accessories i/c making connection etc. as required. TMC 501 1XT- LED 22w P3242 i/c having 1 No. of 18watts MAS LED tube light in the existing fittingi etc. as required. |
| 31 | Supplying and fixing of 200 amps changeover 4 pole 415 volts 50 Hz including making connection etc. as required at site. (Model No. IHBFFE0200) (Make Havells) |
| 32 | S/F/Testing and commissioning of LED fitting double box type fitting (2x20watts) complete with all accessories and 2 Nos. 18 watts MAS LED tube etc. on directly on ceiling or wall i/c connection with 1.5 sq,mm FR PVC copper cond. cond. cale etc. as required. (Model No. TMC 501 2x T LED 22W P3242) (Philips) |
| 33 | Supplying and fixing of 18 watts LED MASS tube 2100 lumen for the existing fitting including making connection etc. as required at site. (Philips) |
| 34 | S/I/T/C of of 150 watts flood light fitting 5700K pressured dia cast housing with lumens 15000 and IP65 protection efficient high 220-240V output emitter LED for better distribution and dimensioin and all accessories etc. as required at 120 watts (Model No. BVP410 LED 150CW HE NB FG S4 XTFCL) (Philips make) |
| 35 | Supplying and fixing of angle frame of suitable size (18\"x18\") including excavation and repairing the same ec. as required at site. |
| 36 | Supplying and fixing of street light pole box of size 8\"x10\" complete with all accessories i/c suitable clamps,suitable bakelite sheet brass screws, washers and 1 Nos. SP MCB 10 amps capacity i/c making connection etc. as required at site. |
| 37 | Supplying, fixing of one number PVC insulated and PVC sheathed /XLPE aluminium armoured conductor power cable confirming to 1.1 KV grade of followinig size direct in ground including excavation , sand cushioning , protective covering and refilling the same etc. as required. |
| 38 | 4x16 sqmm |
| 39 | 3.5x185 sqmm |
| 40 | S/F 1 Nos. RJ-45 1 module box i/c mdoular plate covering in front on surface connectionetc.As required. |
| 41 | Supplying and fixing of following exhaust fan 900 RPM including making connection wooden work if required at site. |
| 42 | 18\" Exhaust fan |
| 43 | 15\" Exhaust Fan |
| 44 | S/F DLP UPVC trunking compartmentwith cover clip on separates partition left right topinternalangle, flat angle, raise function,flat function cover to body joints mosaic clip & support from mosaicisolation bracket 2 mm thick plastic. (Legrand) |
| 45 | 105mm x 50 mm with all accessories |
| 46 | 80 mm x 50 mm with all accessories |
| 47 | Servicing/ meggering /checking of load balancing /checking with ton tester of existing panel i/c removing the dust and carbonized and dress up the hanging wire along with thimble if necessary etc. as required at site. |
| 48 | P/F installation, testing and commissioningof following MCCB AC supply complete with connection in the suitable enclosure etc. as required at site (Model No. DN3-250N) (250 amps MCCB 3 Pole 50 KA) |
