|
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out as dir. |
| 2 | M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfacehardcore of broken stone nexc 63mm as dir. |
| 3 | M&L type D2 1:4:8 40mm graded agg. in Cement concrete in foundations, filling and mass concrete all as dir. |
| 4 | M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking endsand binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips mild steel 10mm dia over cut to bent shape as required size as dir. |
| 5 | M&L Mild steel bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking endsand binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipsmild steel 10mm dia over cut to bent shape as required size as dir. |
| 6 | M&L Formwork to sides of flat concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; all as dir. |
| 7 | M&L Formwork rough finished surfaces of concrete to sides of pillars,posts, struts, piers, columns and stanchion as dir. |
| 8 | M&L RCC Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under- reamed piles and mass Cement concrete type B1, 1:2:4 20mm graded aggregate as dir. |
| 9 | M&L for RCC type-B-1 1:2:4, 20mm gradded aggregate in Columns, pillars, piers, posts and struts as dir. |
| 10 | M&L Rendering 15 mm thick cement plaster 1:6 on fair/unfair faces of brick work or concrete surfacesrendering is to be finished even and smooth (without using extra lime or cement) all as directed |
| 11 | M&Ltype 1:2:4 20mm graded agg. in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string ourses,lacing courses, parapets as dir. |
| 12 | Synthetic Enamelc paint:- M&L for preparation of new surfaces of brick wall or concrete surfaceand over a coat of primer colour (Make : Asian , Berger & Nerolac as directed by EIC/WIC |
| 13 | M&L Forming letters, figures etc. by cutting \"V\" grooves in new lime,cement plaster (per cm of height) as dir. |
| 14 | Returning, filling of hard dense soil in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. as dir. |
| 15 | NOTE: (i) This work is to be carried out in scattered location in demarked land as per Map and Coordinates.(ii) GPS coordinates will be provided to the contractor for marking the location of pillars during execution of the work, hence the contractor has to bring the equipment for demarcating the coordinates on the ground during execution of the work at his own cost.(iii) Approach road may not be available to reach at all locations.(iv) The contractor must see site before quoting rates. |
