|
| 1 | Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc. complete all as specified and directed by Engineer-in-Charge. |
| 2 | Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge. |
| 3 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not balking) removing serviceable tiles to store / given as credit to contractor complete all as specified and directed by Engineer-in-Charge. |
| 4 | Demolition of brickor stone/boulders masonry, built in cement mortar complete all as specified and directed by Engineer-in-Charge. |
| 5 | Taking down chowkhat or frame with shutters (without taking shutter from the frame) exceeding 1.5sqm and not exceeding 4.00 sqm each complete all as specified and directed by Engineer-in-Charge. |
| 6 | Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n. exe 1.50 Sqm each complete all as specified and directed by Engineer-in-Charge. |
| 7 | Excavating in trenches n. exc. 1.5m wide and 1.5m in depth, for foundation n. exc. 10 sqm area on plan and n. exc. 1.5m in depth and getting out in hard/dense soil complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for cement concrete type C-2, (1:3:6) (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed by Engineer-in-Charge. |
| 9 | M&L forbrick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius in CM 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 10 | M&Lfor rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 11 | M&L for rendering 15 mm thick in cement mortar 1:6finishingon brick or concrete surfaces other than fair faces finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 12 | M&L 2ndclass soft wood, plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge. |
| 13 | Supply and fixing 2nd class hard wood 35 mm thick panelled shutters (any number of panels ) with panels of timber flat on both sides (feather edged) of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed by Engineer-in-Charge. |
| 14 | Supply and fixing 35mm thick 2ndclass hard woodglazed and skeleton shutters open rebated and prepared to receive glass, gauge etc. (internal sash bars) edges of framing plane, chamfered or rounded fitted and mitred beads for securing glass etc size of members as specified in SSR Part-I Section 8 clause8.24(a)(kail) complete all as specified and directed by Engineer-in-Charge. |
| 15 | S&F for30 mm thick 2nd class hard woodglazed and skeleton shutters open rebated and prepared to receive glass, gauge etc windows/ventilators, divided into square with plain chamfered or rounded, mitred and with edges of sash bars any numbers , provided with stiles and rails as specified in SSR part I section 8 clause 8.24 (b) complete all as specified and directed by Engineer-in-Charge. |
| 16 | S&F aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts ofsections or cast-aluminium extruded alloy and fixed complete all as specified and directed by Engineer-in-Charge. |
| 17 | S&F aluminium anodised barrel tower bolts extruded section of size 200 mm, complete all as specified and directed by Engineer-in-Charge. |
| 18 | S&F aluminium handle extruded fabricated type anodised of size 150 mm complete all as specified and directed by Engineer-in-Charge. |
| 19 | S&F forbutt hinges 100mm medium weight stainless steel complete all as specified and directed by Engineer-in-Charge. |
| 20 | S&F for butt hinges 75 mm medium weight cold rolled mild steel complete all as specified and directed by Engineer-in-Charge. |
| 21 | S&F MS helical door spring including roller & roller plate complete 300 mm size complete all as specified and directed by Engineer-in-Charge. |
| 22 | S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge. |
| 23 | S&F in repairs harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed by Engineer-in-Charge. |
| 24 | S&F in repairs Vitreous chinawash hand basin,Vitreous chinawhite, flat back, size 550 x 400 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. (Including 15mm bore fancy type CP pillar tap, waste coupling and 32mm dia PVC waste pipe) complete all as specified and directed by Engineer-in-Charge. |
| 25 | S&F in repairs vitreous chinabowl urinal flat back, size of 465 x 355 x 265 mm white (min), with grating and union for discharge pipeincluding flushing system, flush pipe & waste pipe) complete all as specified and directed by Engineer-in-Charge. |
| 26 | S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connections of flush pipe to squat pattern closet including lime concrete bedding and all joint making good to the floor complete all as specified and directed by Engineer-in-Charge. |
| 27 | S&F in repairs75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor complete all as specified and directed by Engineer-in-Charge. |
| 28 | S&F in repairs110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floor complete all as specified and directed by Engineer-in-Charge. |
| 29 | S&F PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge. |
| 30 | S&F 110mmPVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge. |
| 31 | S&F 75mm PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge. |
| 32 | S&F in repairs PVC valveless 10 litre capacity syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed by Engineer-in-Charge. |
| 33 | S&F in repairs 600 x 450mm bevelled edge mirror of selected quality glass mounted on 6mm thick PVC sheet and 3 mm thick PVC moulded frame around the glasswith CP brass screws and cup washers including provision of hanging hooks and sheet glass shelf assemble consisting of 5.5 mm thick sheet, 12 cm wide with CP brackets guard and railing of 60 cm long complete all as specified and directed by Engineer-in-Charge. |
| 34 | M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 Sqm in each pane including hacking out old glass panes complete all as specified and directed by Engineer-in-Charge. |
| 35 | S&F vitrified ceramic dark shade coloured tiles 10mm thick (square/rectangular) polished, area of each tiles n. exc 0.36 sqmin floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 36 | S&F Non skidtiles7 to 8mm thick (square/rectangular) area of each tilesexc 0.06 sqm but n exc 0.11sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 37 | M&L for glazed ceramic tiles in vertical surfaces 350 x250x7/450x350x7 mm thick on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including cement screed bed 10mm thick in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 38 | S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm single side pre-laminated PVC sheet reinforced with MS square tube manufactured as per SSR Part-I specifications and drawings complete all as specified and directed by Engineer-in-Charge. |
| 39 | S&F factory made solidPVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and gap insert for top rail and bottom rail panelling of plain colour PVC to sheet to be fitted in the MS frame welded / sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent/ cement complete all as specified and directed by Engineer-in-Charge. |
| 40 | S&F in repairs 15 mm bore fancy typeCP bib tapscast copper alloy with crutch or butterfly nuts with chromium plated handle, screwed down for iron pipe complete all as specified and directed by Engineer-in-Charge. |
| 41 | M&L cement concrete type C-2, 1:3:6 (using 40mm graded crushed stone aggregate), 75mm thick as in plinth protections complete all as specified and directed by Engineer-in-Charge. |
| 42 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge. |
| 43 | S&F anodised aluminium snap grid frame work for false ceiling size of grid 605x605mmI frame complete all as specified and directed by Engineer-in-Charge. |
| 44 | S&F for 10mm thick PVC insulation panels with EPS stuck to 1 mmplain PVC sheet suitably placed in false ceiling grid made of aluminium & GI/MS as per specification and drawing complete all as specified and directed by Engineer-in-Charge. |
| 45 | Dismantling water storage tanks of any description, exc 500 litres & n exc 1000 ltr capacity and removing from site complete all as specified complete all as specified and directed by Engineer-in-Charge. |
| 46 | S&F for Rotational moulded polyethylene 1000 litres capacity waterstorage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed by Engineer-in-Charge. |
| 47 | Taking upor down 15mm dia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge. |
| 48 | Taking upor down 20mm dia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge. |
| 49 | S&F 15mm bore GI tubing medium grade galvanised with all fittings concealed and fixed to walls & floors etc. complete all as specified and directed by Engineer-in-Charge. |
| 50 | S&F 20mm bore GI tubing medium grade galvanised with all fittings concealed and fixed to walls & floors etc. complete all as specified and directed by Engineer-in-Charge. |
| 51 | M&L in repairs for weather boarding in 2nd class softwood clean sawn, plain, 20 mm thick or feather edges, 15 mm to 20 mm thick and fixed with 30 mm laps joints complete all as specified and directed by Engineer-in-Charge. |
| 52 | S&F in repairs 20 mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe & fixed complete all as specified and directed by Engineer-in-Charge. |
| 53 | S&F in repairs brass chromium plated tubular towel rail with brackets, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed by Engineer-in-Charge. |
| 54 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engineer-in-Charge. |
| 55 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 56 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof ridge etc fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 57 | M&L for applying3 mm thickwall care putty on wallincluding preparation new surfaces plastered or unplasteredsurfaces complete all as specified and directed by Engineer-in-Charge. |
| 58 | M&L for preparation of new plastered surfaces of wall surfaces andapplying two coats of oil bound distemper over a coat of alkali resistant priming paintcomplete all as specified and directed by Engineer-in-Charge. |
| 59 | M&L for preparing plastered or unplastered old surfaces of walls andapplying two coats of oil bound distemper over a coat of alkali resistant priming paintcomplete all as specified and directed by Engineer-in-Charge. |
| 60 | M&L for preparing plastered or unplastered new surface of walls and applying two coats of Cement base paint on walls.(External) complete all as specified and directed by Engineer-in-Charge. |
| 61 | M&L for preparation of plastered or plastered oldsurface of walls and applying two coats of cement base paint on walls (externally) includingremoval ofexisting treatment complete all as specified and directed by Engineer-in-Charge. |
| 62 | M&Lfor two coats of synthetic enamel paint on new wooden surfaces over coat of pink primer tonew surfacesincluding preparation of surfaces,over 10cm width or girth complete all as specified and directed by Engineer-in-Charge. |
| 63 | M&Lfor two coats of synthetic enamel paint on old wooden surfacesincluding complete removal of existing treatment and preparation of surfaces over 10cm width or girth complete all as specified and directed by Engineer-in-Charge. |
| 64 | M&L for two coats of synthetic enamel paint on old steel surfacescomplete all as specified and directed by Engineer-in-Charge. |
| 65 | M&L for 75mm thick PCC type D2 1:4:8 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete, floor sub base etc. surface fair finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 66 | M&L for Machine pressed precast concrete interlocking paver blocks any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade - With Grey Cement andpigment complete all as specified and directed by Engineer-in-Charge. |
| 67 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge. |
| 68 | M&L for PCC 1:2:4 type B1 (20 mm graded crushed stone aggregate) as in coping etc. complete all as specified and directed by Engineer-in-Charge. |
| 69 | Demolition of reinforced cement concretecover slab for MH/Spetic tank (reinforcement cut to facilitate demolition) and removing the debris to a distance not exc 500 Mtr complete all as specified and directed by Engineer-in-Charge. |
| 70 | M&L for precast cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregatefor cover slab for Man holes/Septic tank set in CM 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 71 | M&L for 10 mm diaand over TMTbars, cut to length, bent to shape required including cranking bending & hooking ends & binding with MS wire annealedn. less 0.9mm dia complete all as specified and directed by Engineer-in-Charge. |
| 72 | Demolition and breaking up drain pipes, 150 mm dia (Salt glazed stone ware, AC or Reinforced concrete) set in cement mortar as in foul conditions complete all as specified and directed by Engineer-in-Charge. |
| 73 | M&L for concretebed to drainpipes150mm dia including packing under and haunching against the sides of pipe with PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate complete all as specified and directed by Engineer-in-Charge. |
| 74 | M&L for salt glazed stone ware drain pipes, grade \"A\"of 150mm dia laid in trenches and jointed including all accessories & fittings complete all as specified and directed by Engineer-in-Charge. |
| 75 | Returning filling in including spreading, levelling , watering and well ramming n exc. 25 cm in layers (Soil) complete all as specified and directed by Engineer-in-Charge. |
| 76 | Removal of excavated surplus (soils) at a distance n exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 77 | S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed by Engineer-in-Charge. |
| 78 | M&L forPCC1:2:4 type B-1, (using 20mm graded crushed stone aggregate) as in grouting of angle posts, pillars, coping, plinth courses, parapets and railings etc includingnecessary form work complete all as specified and directed by Engineer-in-Charge. |
| 79 | M&L for precast cement concrete, type B0 1:2:4(using 12.5 mm graded aggregate.) louvers and jallies, 40mm thick (measured solid) includingpre-cast pillars of size 125 mm x15 mm in sectionall moulding , complete set in cm (1:4)on wall etc. complete all as specified and directed by Engineer-in-Charge. |
| 80 | M&L for random rubble masonry walling, uncoursed, well bounded, beddedand solidly hearted, built in cement mortar (1:6) but except stones (retrieved from demolition of stone masonry) complete all as specified and directed by Engineer-in-Charge. |
| 81 | M&L for 2ndclass hard wood, plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge. |
| 82 | M&Lfor RCC (nominal mix )(1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columnsetc complete all as specified and directed by Engineer-in-Charge. |
| 83 | M&Lfor RCC (nominal mix) 1:2:4, type B1 (using 20 mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed by Engineer-in-Charge. |
| 84 | M&L for form work to soffits of suspended slab such as roof slabs, floor slab, landings and similar work not exc 200 mm thick (horizontal or sloping) platforms etc complete all as specified and directed by Engineer-in-Charge. |
| 85 | M&L for form work to edge of concrete, flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floors and roofs n. exc 20cm wide and sides of RCC/PCC bands in walls, slabs etc horizontal or sloping and similar works exc 10cm but n exc 20 cm wide complete all as specified and directed by Engineer-in-Charge. |
| 86 | M&L for mild steel TMT bars 5 mm diaand over upto and including 10 mmdia, cut to length bent to shape required as in stirrups , spacer and binders etc. complete all as specified and directed by Engineer-in-Charge. |
| 87 | Taking down of shutters and refixing the same in same opening n exc 1.0 sqm each complete all as specified and directed by Engineer-in-Charge. |
| 88 | Taking down of shutters and refixing the same in same opening exc 1.0 sqm but n exc 2.0 each complete all as specified and directed by Engineer-in-Charge. |
| 89 | S&F aluminium anodised barrel tower bolts extruded section of size 150mm long , complete all as specified and directed by Engineer-in-Charge. |
| 90 | S&F100mm mild steel pressed handles oval type stove enamelled black complete all as specified and directed by Engineer-in-Charge. |
| 91 | M&L for kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 92 | All as per item No 91 above herewith-in-before but on vertical surfaces of walls /skirting/dado etc complete all as specified and directed by Engineer-in-Charge. |
| 93 | M&L in repairs for 20mm thick pre-polished graniteslabs, machine cut, in vertical/horizontal surfaces with bolting and araldite laid over and including 15mm thick rendering in cement mortar 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of the granite stone including grinding and polishing complete all as specified and directed by Engineer-in-Charge. |
| 94 | M&L for cement concrete type C-1, 1:3:6 (using 20mm graded crushed stone aggregate), 50mm thick as in plinth protections complete. |
| 95 | M&L 2nd Class hard wood Eaves, wrought on both sides, plain, 20-25mm thick and fixed with 30mm laps, complete all as specified and directed by Engineer-in-Charge. |
| 96 | Dismantling timber scantling 40 sq cm and over in section, in any position complete all as specified and directed by Engineer-in-Charge. |
| 97 | S&F timber in framed work in second class hard wood clean sawn as in scantling etc fixed in repairs complete all as specified and directed by Engineer-in-Charge. |
| 98 | S&F fibre glass translucent corrugated sheeting with two corrugation side lap fixed with L type or J type cranked hook bolts complete all as specified and directed by Engineer-in-Charge. |
| 99 | M&L for preparing plastered new surfaces of walls and applying three coats of white wash on walls complete all as specified and directed by Engineer-in-Charge. |
| 100 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting outin soft loose soil complete all as specified and directed by Engineer-in-Charge. |
| 101 | M&L hardcore of gauge exc 63mm but n.exc 100 mm, broken bricks deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed by Engineer-in-Charge. |
| 102 | S&F in repairs stainless steel wire cloth 0.36 mmnominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed by Engineer-in-Charge. |
| 103 | Dismantling water storage tanks of any description, n. exc 500 litres capacity and removing from site complete all as specified and directed by Engineer-in-Charge. |
| 104 | S&F for Rotational moulded polyethylene 500 litres capacity waterstorage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ballcomplete all as specified and directed by Engineer-in-Charge. |
| 105 | S&F in repairs floor stainless steel gratings, 125mm dia complete all as specified and directed by Engineer-in-Charge. |
| 106 | S&F in repairs 15 mm size PVC connection with PTMT nuts of 600 mm long complete all as specified and directed by Engineer-in-Charge. |
| 107 | S&F in repairs swivel shower of PTMT any colour with arm, 195 mm long with bend of 45 degree with flange (both min wt 80 gms ) complete all as specified and directed by Engineer-in-Charge. |
| 108 | S&F 100mm cast iron sanitary connection for WC outlet complete all as specified and directed by Engineer-in-Charge. |
| 109 | S&F in repairs 75 mm dia CI floor trap, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1using 20mm graded crushed stone aggregate complete all as specified and directed by Engineer-in-Charge. |
| 110 | S&F castiron Nahani trap 75 mm dia including jointing to pipe complete all as specified and directed by Engineer-in-Charge. |
| 111 | S&F in repairs, 15 mm bore CP angle valve cast copper alloy screwed down, high pressure with crutch or butterfly handlefancy typecomplete all as specified and directed by Engineer-in-Charge. |
| 112 | S&F in repairs, 15 mm bore Stop valves, cast copper alloy with long shank and cup (concealed type) cast copper alloy screwed down , high pressurefancy typecomplete all as specified and directed by Engineer-in-Charge. |
| 113 | S&F glass dividing strips, 38x3mm thick as in floors complete all as specified and directed by Engineer-in-Charge. |
| 114 | M&L for rendering 10 mm thick in cement mortar 1:6finishingon brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 115 | Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc. complete all as specified and directed by Engineer-in-Charge. |
| 116 | M&Lforpoint wiring complete for light/ fan on independent /combined boardwith cable 1.5 sqmm (Nominal cross sectional area) FRLSPVC insulated multistranded unsheathed copper conductor,drawn in and including PVC casing & capping and includingpipe hooks, elbows, junction covers and junction boxes , afterfixing or cutting on wall chasing for conduits and sinking\"s for sunkencast iron/ pressed steelterminal boxes 60mm deep, suitable lengthand thickness for mounting, switches, sockets, fan regulatorwith 3 mm thick plastic laminated sheet cover fixedwith brass screwed and cup washers, dulyfixed on wall or grouting and painted with red oxide metal primer and making the gooddisturbed surfaces of wallin CM 1:3 with white wash or existing colour including provision ofcontinuousearth continuity conductoralong with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switchand connected to commonearth dolly complete all as specified and directed by Engineer-in-Charge. |
| 117 | Description all as per srl item No-116 here in above but for one 5A socket outlet on the same board controlled by one switch. |
| 118 | Description all as per srl item No-116 here in above but for one 3 pin 5A socket outlet independent controlled by one switch. |
| 119 | Description all as per item No 116 above but for 3 pin socket outlet 15 Amps independent board with 2.5 Sqmm copper conductor. |
| 120 | S & F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FR/FR/FRLS stranded copper conductor drawn in and including surfacePVC conduit /casing capping of size 20mm “medium quality” conduit including 4.00 Sq mm (Nominal Area) copper cableas earthcontinuity conductor after fixing or chasing in wall and making good the disturbed surfaces and white wash or existing colour, necessary junction box and coversincluding necessary connections, PVCflexible pipes are used in panel board while connecting the cableDescription(Note : PVC cable and PVC conduit shall be ISI marked) |
| 121 | S&F switch piano flush type 5/6 Amps single pole one way complete all as specified and directed by Engineer-in-Charge. |
| 122 | S&F for Switch Socket combination, 3 pin 16 amps multi purpose 2 in 1 flush type, 230 volts complete all as specified and directed by Engineer-in-Charge. |
| 123 | S & F for Switch Socket combination, 6 pin 5 and 15 amps multi purpose 2 in 01 flush type, 230 voltscomplete all as specified and directed by Engineer-in-Charge. |
| 124 | S&F for Switch Socket combination 2 in 1, 6 Amps flush type, 230 volts complete all as specified and directed by Engineer-in-Charge. |
| 125 | S&F socket outlet 3 pin, 5 Amp, flush type complete all as specified and directed by Engineer-in-Charge. |
| 126 | S&F fan regulator Electronic type complete all as specified and directed by Engineer-in-Charge. |
| 127 | S&F ceiling rose surface bakelitethree terminals complete all as specified and directed by Engineer-in-Charge. |
| 128 | S&F Lamp holder insulated body with back plate for batten fittings complete all as specified and directed by Engineer-in-Charge. |
| 129 | Supply and fixing of LED9 watt pin type bulb complete all as specified and directed by Engineer-in-Charge. |
| 130 | Taking down old Unserviceable Bldg Security light fitting and taken as credit including supply & Fix 25WNew generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaries with high power LED as light source along with suitable bracket including all accessories complete all as specified and directed by Engineer-in-Charge. |
| 131 | S&F LED lights fitting 1x20W, 230V, AC decorative box type with drive, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge. |
| 132 | S&F LED light fitting mirror type with high out put diffuser 1x5Watt, 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. |
| 133 | S&F LED lights fitting 1x10W, bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge. |
| 134 | Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt( White/ Warm White) , 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer-in-Charge. |
| 135 | S&F in replacement energy saving exhaust fan300 mm sweep sturdy engineering plastic complete with louvers shutters, voltage 230V, 50Hz, RPM 1200, copper winding making hole in wallas and where required and, connecting electrically to ceiling rose or connector block using PVC insulated and overall sheathed 3 core cable of size 0.75 Sqmm with flexible copper conductor all as required at site or complete all as specified and directed by Engineer-in-Charge. |
| 136 | S&F in replacement MCCB Distribution board, TP&N, vertical, double door, sheet steel, enclosure powder coated with 100 Amps rated bus bar with neutral link, 415 Volts 4 wayfixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 3 Pole V-Tec MCCB of 100 A rating & 16kA breaking capacity, MCCB pre-fitted at factory complete all as specified and directed by Engineer-in-Charge. |
| 137 | S&F in replacement sheet metal enclosure MCB distribution board, double door with IP -43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including making chases in wall for fixing DB and making good disturbed wall surfaces to match with existing specification complete all as specified and directed by Engineer-in-Charge. |
| 138 | Supply and fix in replacement MCB SPN, 240 volts any rating from 40-63 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed by Engineer-in-Charge. |
| 139 | M&L for in replacement MCB single pole 240 volts 5 to 32 amps as per site requirement , with rupturing capacity 10 KA as per IS-8828-1996 (IEC-60898), disconnect upper and lower terminals , integrated label holder to ensure circuit identification complete all as specified and directed by Engineer-in-Charge. |
| 140 | Supply, laying and fixing in replacement and testing cable XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volt grade of size 35 Sqmm 4 core complete all as specified by the Engineer in charge. |
| 141 | Supply , laying and fixingin replacement and testing cable XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volt grade of size 25 Sqmm 4 core complete all as specified and directed by Engineer-in-Charge. |
| 142 | S&F layingin replacement in trenches,pole, and along wall etc complete, XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor,1100 volt grade, cross sectional area 10 sq mm 2 core complete all as specified and directed by Engineer-in-Charge. |
| 143 | Excavation in trenches in n. exc 1.5 mtr vide and 1.5 mtr in depth and getting out in soft/loose soil for laying of U/G cable complete all as specified and directed by Engineer-in-Charge. |
| 144 | Supply & laying of bricks common burnt clay locally availablebest quality laying in trenches across the cable for protection complete all as specified and directed by Engineer-in-Charge. |
| 145 | M&L for sand cushioning in trenches for cable protectioncomplete all as specified and directed. Note: Punned thickness shall be measured and paid. |
| 146 | S&F GI water tubing medium grade (ISI marked)laid in trenches including fittings as required as site and including jointing internal as specified of size :- (a) GI tubing 40 mm dia bore |
| 147 | Material & labour for in replacement earthing complete with galvanised cast iron earth plate electrode of size 600x600x6.0mm thick busied directly in ground less than 2.25mtr deep below normal ground level as earth electrode with top edge of the earth plate not less than 1.5mtr below normal ground level, continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit coverwith handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shora all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 or directed by Engineer-in-charge and incl testing on completion. (i) Main earthing lead from earth plate electrode to test point up to length of 7.5 meters length shallbe deemed to be included in the unit rate quoted against this item .(ii) GI protection pipe & earthing lead beyond 7.5 meter shall be measured and paid for separately under appropriate item of Sch A.(iii) On testing after completion if the desired resistance is not obtained the contractor shall redo the earthing without any extra cost to the department . |
