Tender For Chidambaram Municipality Repair And Maintenace Of Sambanthakara Street Anganwadi In Chidambaram Municipality
Tender Value
7 Lakhs
Estimated cost
Bid Submission
09 Apr 2025
0 days left
EMD
7000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chidambaram → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Chidambaram Municipality Repair And Maintenace Of Sambanthakara Street Anganwadi In Chidambaram Municipality Repair And Maintenace Of Sambanthakara Street Anganwadi In Chidambaram Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Plain Cement Concrete etc., complete as per standard specification. |
| 2 | Earth work excavation in Sand silt or other Loose soil wet sand or silt not under water light black cotton soil sandy loam ordinary soilexcept hard rock requiring blasting including shering and shuttering and bailingout water wherever necessary refilling the sides of foundation with excavated earth in layer of 15 Cm thick well rammed consolidated and depositing the surp less earth within compound in places shown by the departmental officers with all leads and lifts etc., complete. |
| 3 | Supplying and filling in foundation andbasement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 4 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 5 | Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification |
| 6 | Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9\" X 43/8\"X 2 3/4\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 7 | Supply and Fixing of Cuddapah Slab 38 / 40mm Thickincluding the cost all materials etc.,complete, in all floors. |
| 8 | Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306) |
| 9 | Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 10mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 10 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with \"P\" trap or \"S\" trap confirming to IS:2556 -Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. |
| 11 | Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer.The colour & quality of tiles should be got approved by Municipal Engineer before use on work |
| 12 | Paving the Top of roof with Solar refelective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by the Executive Engineer before use on works) |
| 13 | FRP Door Sutter with FRP Door Frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP ShutterPanel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified byEngineers |
| 14 | Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification |
| 15 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. |
| 16 | Supply and fixing of18W 4 Feet LED Fitting with LED including cost of all materials labour charges. |
| 17 | Supplyandfixingof1200mm(48\")ACceilingfancompletewithsteppedelectronic300Wregulatorwith1meterdownrod on the existing clamp |
| 18 | Wiring with 2x1.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5AFT switch with continuous earth wire connection of 1.5sq.mm copper wire for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator) SD23. |
| 19 | Drilling of borewells of size 6\"\" to 8\"\" dia in sedimentary formation using hand boresets including insertion of casing pipes and removal of casing pipes etc.,including collection of samples as directed by the TWAD Board officers. |
| 20 | Reaming from 140/150mm dia pilot bore to 300mm dia above as directed by the departmental officers up to 60m depth ending below GL. |
| 21 | Supply and delivery of un plasticised for 140mm dia plain PVCpipes with socket ends and centering guides for every 15mtr length of pipes as per is 12818/92 and as amended from time to suit deep bore well up to 80m depth (CS) for delivery at site w |
| 22 | Supply and delivery of un plasticised for 140mm dia plain PVC slot casing pipes with socket ends and centering guides for every 15mtr length of pipes as per is 12818/92 and as amended from time to suit deep bore well up to 80m depth (CS) for delivery at s |
| 23 | Labour for inserting 140mm dia PVC pipe with slots and with out slotting in the `drilled hole including welding the joints etc., complete and supplying and packing the annular space with pebbles of size on. |
| 24 | Supply delivery and fixing of DN 140mm Pvc end cap suitable for the above pipes with ISI marking inclusive at all take etc., complete |
| 25 | Supply and delivery of following pipe and specials conforming to is 554/86Pump set |
| 26 | 40mm hdpe pipe pump set erection. |
| 27 | 40mm GI elbow |
| 28 | M.S. clamp set |
| 29 | 32mm pvc pipe |
| 30 | 25mm pvc pipe |
| 31 | Supply and delivery of wiring Materials for EB service connection for Pump set |
| 32 | 1.5mm flat copper submersible cable |
| 33 | 1HP Starter Panel board |
| 34 | Supply and delivery of single phase submersible pump set with motor as per ISI, 20 lpm x 40m head including panel board consist of following 1. Relay with ISI mark.2 Contact Unit ISI mark starter. |
| 35 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gaugesupto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard andlaying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 36 | Add GST 18% |
AI Tender Summary
Tender Timeline
Mar 24, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedApr 09, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 09, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender