|
| 1 | Supplying erecting and testing and commissioning minimum 2000 mm high Infra-Red/IR curtain with minimum 80 beams, suitable to attach automatic Lift car door complete with electronic driver suitable to work on 230 V AC supply with required wiring and accessories complete connected to the lift controller safety circuit, including dismantling of existing accessories a applicable. |
| 2 | Providing and fixing new magnetic reed switch with M.S. Flag for leveling the lift. Providing and fixing necessary magnet for the floor position indicator, providing and fixing electronics card with digital indicator, complete with re-erection including dismantling of existing accessories as applicable |
| 3 | Supplying & erecting over travel final/Terminal limit switch complete with nylon roller for up & down direction along with cams etc as required. |
| 4 | \"Providing & fixing LOP with two push button with metallic top& Braille coded suitable for UP/DN having luminous glowindicator around button with MS box & 3mm thick SS face plate with screws with UP & DN button & digital CPI (suitable for2 digit) complete with necessary connections,including dismentling of existing door is applicable\" |
| 5 | Providing & fixing LOP with two push button with metallic top& Braille coded suitable for UP/DN having luminous glowindicator around button with MS box & 3mm thick SS face plate with screws with UP & DN button & digital CPI (suitable for1 digit) complete with necessary connections,including dismentling of existing door is applicable\" |
| 6 | Supplying erecting, testing & commissioning of electronic microprocessor/PLC based collective-selective lift controller with closed loop logic suitable up to 7.5kW capacity lift duty motor without VVVF Drive & lift car travelling Gr+9 floors having power operated doors complete erected on wall or floor made from 1.5mm thick CRCA sheet with powder coated enclosure having IP54 protection grade. including dismantling of existing accessories as applicable |
| 7 | Providing & fixing COP with push buttons having luminous glow indicator around button suitable for G+8floors with push buttons with metallic top & Braille coded suitable for door close, door open, alarm bell, stop, light, fan, intercom etc, FPI, with MS box & 3mm thick SS face Plate with UP & DN arrows & digital FPI (suitable for 2digits) complete with necessary connections, including dismantling of existing COP as applicable |
| 8 | Supplying erecting, testing & commissioning of VVVF drive having provision for closed loop logic with necessary card, suitable to drive lift duty electric motor up to 7.5kW capacity to be erected in position with necessary wiring in existing control panel including dismantling of existing accessories as applicable |
| 9 | Providing & fixing inspection/ maintenance box with cover of suitable size with UP/DN push buttons (with mechanical protection), stop button as per IS, mechanically protected, toggle switch for normal/inspection/maintenance mode, 6A/250V 3Pin socket & 6A piano type switch protected cover with bulb & switch having IP54 grade protection class, this job includes dismantling of existing Inspection / maintenance box if any. |
| 10 | Providing dismantling the existing lift BB make , MR , gearedlift machinefrom lift shaft by unloading rope from lift car, counter weight and hanging the lift car , counter weight tohook and bringing the lift machine out of the lift shaft and transportation of machine to carryout necessary repairs and re-erection the same as original with necessary alignment testing complete after repairing. |
| 11 | Providing repairs to BB make geared PMSMoflift machine for replacing ofexistingworn out/damaged bearings in workshop with the help of pullerand replacing break coil magnetetcandprovidingallied necessary repairs and testing of allrequired parameters complete. |
| 12 | Supplying erecting, testing & commissioning of rotary encoder mounted on the lift motor shaft for correct & control the positioning & direction of the lift car & providing closed loop feedback to the lift controller complete with necessary shielded data cable up to controller with necessary connectors, this job includes dismantling of existing encoder if any. |
| 13 | Providing dismantling the existing lift car/counter weight guide shoe liner and providing and fixing new superior quality non metallic car/counter weight guide shoe Liner complete with re erection, alignment & adjustment complete with lubrication. |
| 14 | Supplying erecting, testing & commissioning of ARD panel having audio-visual indication in lift car complete with necessary SMF VRLA batteries suitable for up to 8 passenger capacity lift car including dismantling of existing accessories as applicable |
| 15 | Providing dismantling the existing OSG pulley set (top & bottom) complete and providing and fixing overspeed governor pulley set ( top & bottom) made from superior quality cast iron completely finished suitable for Lift car rated speed. |
| 16 | Supplying & erectingwire rope of 3/4/6mm dia. having 6/19 construction as per IS complete with termination in provided eye bolts including dismantling of existing accessories as applicable |
| 17 | Supplying, erecting, testing & commissioning programmable rope mounted Overload Warning Device (OWD) within built digital indicator complete with required wiring & accessories with audio visual indication in lift car including dismantling of existing accessories |
