Tender For Strengthening Of Staircase, Balconies And Chhajjas, Construction Of Overhead Water Platform, Replacement Of G.I. And C.I. Pipe Line Repairing And Finishing Of Outer Building Area Of Quarter No. C-133 To C-140, Ajmal Bagh, Jamia Millia Isla
Tender Value
16.63 Lakhs
Estimated cost
Bid Submission
14 Apr 2025
0 days left
EMD
33300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Strengthening Of Staircase, Balconies And Chhajjas, Construction Of Overhead Water Platform, Replacement Of G.I. And C.I. Pipe Line Repairing And Finishing Of Outer Building Area Of Quarter No. C-133 To C-140, Ajmal Bagh, Jamia Millia Islamia
BOQ
| Sl. No. | Item Description |
| 1 | CEMENT CONCRETE (CAST IN SITU) |
| 2 | Providingandlayingcementconcreteinretainingwalls, returnwalls,walls (any thickness)includingattached pilasters,columns,piers,abutments,pillars,posts,struts, buttresses,stringorlacingcourses,parapets,coping,bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:_1:1%:3(1cement:VA coarse sand(zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 3 | REINFORCED CEMENT CONCRETE |
| 4 | Reinforced cement concrete work in beams, suspended foors, roofshavingslopeupto 15*landings,balconies,shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to foor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 6 | Suspended floors, roofs, landings, balconies and access platform |
| 7 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 8 | Weather shade, Chajjas, corbels etc., including edges |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level._Cold twisted bars |
| 10 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). |
| 11 | MASONRY WORK |
| 12 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :_Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 13 | CLADDING WORK |
| 14 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 15 | STEEL WORK |
| 16 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 17 | FLOORING |
| 18 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 19 | ROOFING |
| 20 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :_In 75x75 mm deep chase |
| 21 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 22 | Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately), including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete :_Red sand stone slab_40 to 50 mm thick |
| 23 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes._75 mm diameter |
| 24 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 25 | Single tee with door |
| 26 | 75x75x75 mm |
| 27 | Bend 87.5° |
| 28 | 75 mm bend |
| 29 | FINISHING |
| 30 | 15 mm cement plaster on the rough side of single or half brick wall of mix :_1:4 (1 cement: 4 fine sand) |
| 31 | Neat cement punning. |
| 32 | Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. |
| 33 | Ordinary cement finish using ordinary cement |
| 34 | Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. |
| 35 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :_New work (two or more coats) over and including water thinnable priming coat with cement primer |
| 36 | Finishing walls with water proofing cement paint of required shade :_New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 37 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :_Two or more coats on new work |
| 38 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 39 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litreof approved brand and manufacture to give an even shade :_Old work (one or more coats) |
| 40 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 41 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :_One or more coats on old work |
| 42 | Finishing walls with water proofing cement paint of required shade : |
| 43 | Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. |
| 44 | REPAIRS TO BUILDING |
| 45 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge._With cement mortar 1:4 (1 cement : 4 fine sand) |
| 46 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:_Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 47 | Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 48 | Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska :_With F.P.S. brick tiles |
| 49 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. |
| 50 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. |
| 51 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with\"S\" or \"P\" trap including dismantling of old WC seat and \"S\" or \"P\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in-charge. |
| 52 | Long pattern W.C Pan of size 580x440 mm |
| 53 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer- in-Charge.(a) Internal Work- Exposed on wall |
| 54 | Dismantling and Demolishing |
| 55 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 56 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 57 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 58 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 59 | In cement mortar |
| 60 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 61 | For thickness of tiles 10 mm to 25 mm |
| 62 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : |
| 63 | 75 to 80 mm dia pipe |
| 64 | 100 mm dia pipe |
| 65 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 66 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 67 | SANITARY INSTALLATIONS |
| 68 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMTpillar cock, 32 mm PTMT waste coupling ofstandard pattern, includingpainting of fittings and brackets, cutting and making good the wallswherever required. White Vitreous China Flat back wash basin size550x400 mm with single 15 mm PTMT pillar cock. |
| 69 | Providing and fixing P.V.C. low level flushing cistern with manuallycontrolled device (handle lever) conforming to IS : 7231, with all fittingsand fixtures complete. |
| 70 | 10 litre capacity - White |
| 71 | Providing and fixing white vitreous china wash basin including makingall connections but excluding the cost of fittings : |
| 72 | Flat back wash basin of size 630x450 mm |
| 73 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete. |
| 74 | Flexible pipe |
| 75 | 40 mm dia |
| 76 | Providing and fixing soil, waste and vent pipes : |
| 77 | 100 mm dia |
| 78 | Sand cast iron S&S pipe as per IS: 1729 |
| 79 | Providing and filling the joints with spun yarn, cement slurry andcement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :_100 mm dia pipe |
| 80 | Providing and fixing M.S. holder-bat clamps of approved design toSand Cast iron/cast iron (spun) pipe embedded in and includingcement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size),including cost of cutting holes and making good the walls etc. :_For 100 mm dia pipe |
| 81 | Providing and fixing plain bend of required degree. |
| 82 | 100 mm dia |
| 83 | Sand cast iron S&S as per IS - 1729 |
| 84 | Providing and fixing single equal plain junction of required degreewith access door, insertion rubber washer 3 mm thick, bolts andnuts complete. |
| 85 | 100x100x100 mm |
| 86 | Sand cast iron S&S as per IS - 1729 |
| 87 | Providingandfixing trapof self cleansingdesign with screwed down or hinged grating with or without vent arm. complete, including cost of cutting and making good the walls and floors: |
| 88 | 100 mm inlet and 100 mm outlet |
| 89 | Sand cast iron S&S as per IS: 3989 |
| 90 | WATER SUPPLY |
| 91 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. Internal Exposed on walls |
| 92 | PN - 16 Pipe, 25mm OD (SDR-7.4) |
| 93 | PN - 16 Pipe, 32mm OD (SDR-7.4) |
| 94 | PN - 16 Pipe, 40mm OD (SDR-7.4) |
| 95 | Providing and fixing PPR Unions |
| 96 | PPR Union 25mm |
| 97 | PPR Union 32mm |
| 98 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :_25 mm nominal bore |
| 99 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 100 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 101 | Providing and fixing PTMT bib cock of approved quality and colour._15 mm nominal bore, 165 mm long, weighing not less than 110 gms |
| 102 | Providing and fixing PTMT pillar cock of approved quality and colour._15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms |
| 103 | Providing and fixing PTMT grating of approved quality and colour._Circular type100 mm nominal dia |
| 104 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball._20 mm nominal bore, 120 mm long, weighing not less than 198 gms |
| 105 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms |
| 106 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour._15 mm nominal bore with 30cm length |
| 107 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour._20 mm nominal bore, weighing not less than 40 gms |
| 108 | Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) including disposal of malba. |
| 109 | NEW TECHNOLOGIES AND MATERIALS |
| 110 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type orof approved makeincluding tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge |
| 111 | 50mm average thickness |
| 112 | 25 mm average thickness |
| 113 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust freesteel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. |
| 114 | Bars upto 12 mm diameter |
| 115 | Bars above 12 mm diameter |
| 116 | Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge._Upto and including 12mm dia. |
| 117 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as perspecifications and direction of Engineer-In-charge complete in all respect._Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make |
| 118 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used)as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). |
| 119 | 25 mm average thickness in 2 layers. |
| 120 | 50 mm average thickness in 3 layers. |
| 121 | Providing, erecting, maintaining and removing temporary protective screens made out of specified fabric with all necessary fixing arrangement to ensure that it remains in position for the work duration as required by the Engineer-in-charge._Wooven PVC cloth |
| 122 | MR Items |
| 123 | Providing and fixing hard drawn wire fabric of size 75x25 mm meshor other suitable soze wire mesh to be fixed & firmly anchored to the concrete surface by mearns of weldedwith existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge. |
| 124 | Add for revised GST @18% in place of 12% ie 6.33% on 1564369 |
AI Tender Summary
Tender Timeline
Mar 22, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedApr 14, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 16, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender