|
| 1 | Taking down carefully unserviceable aluminium/copperpoint wiring (light, fan, socket or power) complete, including unserviceable fitting such as switches, ceiling roses, pendants, regulators, sockets, etc and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 2 | Taking down unserviceable sub-main wiring any type withrigid steelconduits/PVC Conduits/PVC casing-caping complete all as specified and directed. |
| 3 | M & L for Point wiring with 1.5 Sqmm (nominal area), FR PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) FR PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including PVC terminal box (sunken type) switch board fixed with suitable sizes cadmium plated iron screws and washers etc.for mounting switches, sockets, regulators etc complete for one light/ceiling fan/Exhaust fan/bell/buzzer point controlled by one ,one way switches complete all as specified and directed. |
| 4 | All as per item No 03 above but one 5 Amps, 3/5 pin socket outlet on the same board with other switches complete all as specified and directed. |
| 5 | All as per item No 03above but for one 3 pin Switch socket combination, 5 Amps on Independent board complete all as specified and directed. |
| 6 | All as per item No 03 here-in-before but wiring with cables of size 2.5 sqmm & cables of size 2.5 sqmm as continuous earth wire for one 15 Amps switch socket combination on Independent board complete all as specified and directed. |
| 7 | M&L for concealed point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables of 1.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size passing through and including suitable PVC conduit with all fittings and accessories of PVC conduit (like Tee, bend etc.) complete fixed to walls /ceiling etc , including cutting chases, making good with cement mortar 1:3, terminated in and including providing PVC/modular metal box of suitable size with 3mm thick hylam sheet cover for fixing ofswitches, sockets, fan regulators etcfor one light/fan/bell/buzzer point controlled by one, one way switches complete all as specified and as directed. |
| 8 | All as per item No 07 above but for one 3 pinsocket outlet, 5 Amps on Independent board. |
| 9 | All as per item No 07 above but for one 3 pin socket outlet, 5 Amps on the same board with other switches |
| 10 | All as per item No 07 above but wiring with cables of size 2.5 sqmm & cables of size 2.5 sqmm as continuous earth wire for one 5/15 Amps switch socket combination on Independent board. One 3 pin socket outlet, 5 Amps, independent board. |
| 11 | S & F switch piano, 5 Amp single pole, flush type one way 230 volts complete all as specified and as directed. |
| 12 | S & F Bell push, flush type, 5 Amps 230 Volts, complete all as specified and directed. |
| 13 | S & F Socket outlet, 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and directed. |
| 14 | S & F Switch socket combination, 2 in 1,5 Amps,flush type, 240 volts complete all as specified and directed. |
| 15 | S & F Switch socket combination,5A/16A, 5 in 1, 240 volts, flush type complete all as specified and directed. |
| 16 | S & F call bell / Buzzer, Ding Dong AC. 230 volts, single pole all as specified and directed. |
| 17 | S & F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body all as specified and directed. |
| 18 | S & Flamp holder, insulated body with back plate suitable for batten fittings all as specified and directed. |
| 19 | S & F LED Lamp 9 Wattcomplete all as specified and directed by engineer in charge. |
| 20 | S&F Stepped type electronic fan regulator flush type230 volt 5 speed control and connecting up and fix position , complete all as specified and as directed. |
| 21 | S & F18/20 W surface and wall mounted LED batten with polycarbonate housing and integrated driver all as specified and directed. |
| 22 | S&F 9 Wsurface and wall mounted LED Battern with polycarbonate housing and intigrated complete all as specified and directed by engineer in charge. |
| 23 | S&F 10W,LED, Energy saving new generation bulk head luminaire with opal diffuser including lamp including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. |
| 24 | S&F LED wall bracket light asthetically designed with B22d & E27 lamp holder made up of polycarbonate, suitable for 9/10 including suitable LED bulb complete with all accessories including connecting up with twin core twisted flexible copper conductor cable from ceiling rose to light fittings and taking down old light fittings of any typecomplete all as specified and dierected. |
| 25 | S&F 25 W LED building security new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminum housing with hight power LED as lighting source and lens imbedded PC Cover having BOTTOM OPENING seperate driver cmpartment with IP 65 protection and inpact resistance of IK07 complete all as specified and dierected. |
| 26 | Taking down unserviceable main switches, DBs, bus bars chambers including all fittings and fixtures such as MCBs, isolator, etc and removing from site complete all as specified anddirected. |
| 27 | S & F Factory made board distribution (DB) single doorin sheet steel enclosure withoutbus bar, SPN,2 way, 240 Volts suitable for housing MCBs complete all as specified and directed. |
| 28 | S & F Factory made board distribution (DB)Double Door in sheet steel enclosure with 200 amps rated common bus bar at incomming end, SPN,4 way, 240 Volts, suitable for housing MCBs complete all as specified and directed. |
| 29 | S & F Factory made board distribution (DB)Double Door in sheet steel enclosure with common bus bar at incomming end, SPN,8 way, 240 Volts , 200 amps suitable for housing MCBs complete all as specified and directed. |
| 30 | S & F Factory made board distribution (DB)Double Door in sheet steel enclosure with common bus bar at incomming end, SPN,12 way, 240 Volts , 200 amps suitable for housing MCBs complete all as specified and directed. |
| 31 | S & F factory made board distribution (DB) Double Door in sheet steel enclosure with common bus bar at incomming end, TPN, 4 way,415 Volt IP-43, IK-09, suitable for fixing MCBs complete all as specified and directed. |
| 32 | S & F in repair MCB, \"C\" Series, SPN, 240 Volts,6 to 32 Amps, 10KA capacity complete all as specified and directed. |
| 33 | S & F in repair MCB, \"C\" Series, SPN, 240 Volts,40- 63 Amps, 10KA capacity complete all as specified and directed. |
| 34 | S & F in repair MCB, \"C\" Series, SP, 240 Volts,5 to 32 Amps, 10KA capacity complete all as specified and directed. |
| 35 | S & F in repair MCB, Four Pole, 415 Volts,63 Amps, \"C\" series, 10 KA breaking capacity complete all as specified and directed. |
| 36 | S&FPVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 200 mm x 150 mm and 50 mm deep, including taking down old unserviceable one complete all as specified and directed. |
| 37 | All as per item No 36 above but size 250 mm x 200 mm x 50 mm deep complete all as specified and directed. |
| 38 | All as per item No 36 above but size 350 mm x 300 mm x 50 mm deep complete all as specified and directed. |
| 39 | All as per item No 36 above but size 175 mm x 100 mm x 50 mm deep complete all as specified and directed. |
| 40 | All as per item No 36 above but size 100 mm x 100 mm x 50 mm deep complete all as specified and directed. |
| 41 | S & Fin repair Switch piano, flush type, 5 Amps, single pole, one way,240 Volts including taking down old unserviceable one complete all as specified and directed. |
| 42 | S & F in repair Ceiling rose, 3 Terminal, PVC/polycarbonate, isolated bodyincluding taking down old unserviceable one complete all as specified and directed. |
| 43 | S & F in repair lamp holder, insulated body with back plate suitable for batten fittingscomplete all as specified and directed. |
| 44 | S & Fin repair Bell push, flush type, 5 Amps 230 Volts, complete all as specified and directed. |
| 45 | S & F in repair Call Bell Ding-Dong type, AC, 230 volts, single polecomplete all as specified and directed. |
| 46 | S & Fin repair Socket outlet, 3/5 pin , 5 Amps, flush type complete all as specified and directed. |
| 47 | S & Fin repair Switch socket combination 2 in 1, 5 pin, 5 Amps,flush type, 240 voltscomplete all as specified and directed. |
| 48 | S & Fin repair Switch socket combination 2 in 1, 6 pin, 6/16 Amps,flush type, 240 voltscomplete all as specified and directed. |
| 49 | S & Fin repair Stepped type (five steps), electronic fan regulator, 220 volts, flush type complete all as specified and directed. |
| 50 | S & F in repairs LED Lamp 9 Wattcomplete all as specified and directed by engineer in charge. |
| 51 | S & F in repair 18/20 W surface and wall mounted LED batten with polycarbonate housing and integrated driver all as specified and directed. |
| 52 | S&F in repair 9 Wsurface and wall mounted LED Battern with polycarbonate housing and intigrated driver complete all as specified by Engr-in- Charge. |
| 53 | S&F in repair recess mounted deep drawn PLANO size (2 ft x 2 ft) CRCA housing with higher power 36 Watt LED Seamless front frame with flat white hight transmission acrylic cover complete all as specified and as directed. |
| 54 | S&F in repair 12 watt Recess, mounted pressure die-cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation with separate replaceable electronic driver included cutting-opening of celing any type & fixing arrangement for fitting complete all as specified and directed by Engineer-in charge. |
| 55 | S&F in repair 25 Watt LED building security light new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having BOTTOM OPENING separate driver compartment with IP65 protection and impact resistance of IK07 including all fixing arrangement and taking down old light fittings of any type complete all as specified and as directed. |
| 56 | S & F in repair LED wall bracket light aesthetically designed with B22d & E27 lamp holder made up of Polycarbonate suitable for 9/10 W including suitable LED Bulb complete with all accessories internally pre-wired and including connecting up with twin core twisted flexiblecopper conductor cable with suitable size. |
| 57 | M & L for Sub main wiring with two runs of 6 sqmm (Nominal area) single core cable FR PVC insulated, multistranded, unsheathed, copper conductor cables 1100 Volts grade drawn throughproviding (new) casing-caping of suitable size,fixed to wall/ceiling etc including6 sqmm (nominal area) single core, FR PVC insulated, multistranded, unsheathed, copper conductor as earth wire and duly connected to common earth pointcomplete all as specified and as directed by Engineer-in-charge. (Note : (a)PVC Conduits/Casing-caping, two run cables and one run of earth wire will be measured as one length. (b) All incoming and outgoing cable shall beconnected by using proper lugs & sockets.) |
| 58 | All as per item No 57 here-in-before but size of copper conductor 2 run of 4 sqmm and 1 run of 4 Sqmm for earth. |
| 59 | All as per item No 57 here-in-before but size of copper conductor 2 run of 10 sqmm and 1 run of 10 Sqmm for earth. |
| 60 | Taking down carefully existingceiling fan of any size/sweep/make from it\"s existingposition, replacement of defective spare parts and re-assembling and refixing/hanging in the same position connecting with flexiable cable including testing complete all as specfied and as directed.Note : Cost of spare parts and flexible connection wire asrequired will be measured and paid separately under respective items of this Schedule as \"Supply only\". |
| 61 | All as per item No 60 but exhaust fan/ wall fan of any sweep/any make complete all as specfied and as directed. |
| 62 | Dismantling ceiling fan (any size/sweep/make) and taking out existing burnt out winding wire of motorand rewinding the same after proper cleaning with super enamelled copper wires as per existing gauge and turn to achieve the desired RPM, cleaningandreplacement of bearings, bushes, capacitor etc as required and testing complete on completion for old modelceiling fan of super enamelled copper winding wire as per requirement and testingcomplete all as specfied and as directed.Note : (a) Replacement of unserviceable parts like capacitor, bearing, bush and flexible wire shall be measured and paid separately as \"Supply only\" under respective items of this Schedule. (b) Ceiling fan shall be collected from MES Store of GE Dinjan and AGE E/M and deposited to Store after repair, cost of which is deemed to be included in unit quoted rate. |
| 63 | Dismantling of exhaust fanany make and taking out existing burnt out winding wire of motor and rewinding the same with super enamelled bare insulated copper winding wires as per existing gauge and turn to achieve desiredRPM including cleaning and replacement of defective parts as required for exhaust fan of size up to 380 mm sweep and testing all complete all as specfied and as directed.Note : (a)Replacement of unserviceable parts shall be measured and paid separately as \"Supply only\" under respective items of this Schedule. (b) Exhaust fan shall be collected from MES Store of GE Dinjan and AGE E/M Mohanbari and deposited to Store after repair, cost of which is deemed to be included in unit quoted rate. |
| 64 | All as per item No 63 but exhaust fan/ wall fan of450mm to 600mm sweep complete all as specfied and as directed. |
| 65 | Repair to fan shaft by filing metal cutting by machine, grinding, polishing complete and making the same in serviceable condition suitable for existing ceiling fan of any capacity complete all as specfied and as directed. |
| 66 | Supply only capacitor (oil filled) of capacity 2.0 mfd complete all as specfied and as directed.Make : Havells/Universal /Tibcon/Sarda/Usha. |
| 67 | Supply only capacitor (oil filled) of capacity 2.5 mfd complete all as specfied and as directed.Make : Havells/Universal /Tibcon/Sarda/Usha. |
| 68 | Supply only capacitor (oil filled) of capacity 3.15 mfd complete all as specfied and as directed.Make : Havells/Universal /Tibcon/Sarda/Usha. |
| 69 | Supply only ball bearing suitable for ceiling fan (any size/sweep/make) complete all as specfied and as directed.Make : TATA/SKF/NBC. |
| 70 | Supply only ball bearing suitable for exhaust fan of upto 380 mm sweep complete all as specfied and as directed.Make : TATA/SKF/NBC. |
| 71 | Supply only ball bearing suitable for exhaust fan of 450 mm to 600 mm sweep complete all as specfied and as directed.Make : TATA/SKF/NBC. |
| 72 | Supply only gun metal bush suitable for any type of ceiling fan complete all as specfied and as directed. |
| 73 | Supply only gun metal bush suitable for any type and any sweep of wall fan/exhaust fan complete all as specfied and as directed. |
| 74 | Supply only flexible wire twisted twin core of size 0.75 Sqmm, copper conductor complete all as specfied and as directed. |
| 75 | M&L for single coat painting to ceiling fan upto 1400mm sweep after dismantling blades, with 1st grade quality synthetic enamel paint by spraying, filling cavities with filler including necessary preparation of surface duly demarking MES fan serial Nos, refixing the blades and re-writing MES Fan serial number complete all as specfied and as directed. |
| 76 | M&L for single coatpainting to exhaustfan/ wall fan upto 380mm sweep with 1st grade quality synthetic enamel paint by spraying, filling cavities with filler including necessary preparation of surface duly demarking the MES Fan Nos and re-writing MES fan serial number complete all as specfied and as directed. |
| 77 | M&L for single coatpainting to exhaustfan/ wall fan from 400 to 600mm sweep with 1st grade quality synthetic enamel paint by spraying, filling cavities with filler including necessary preparation of surface duly demarking the MES fan Nos and re-writing MES Fan serial number complete all as specfied and as directed. |
| 78 | M&L for cutting holes in circular shape in brick walls exceeding half brick but not exceeding one brick thick in cement mortar for fixing exhaust fan and making good disturbed surfaces in cement mortar (1:3) finished even and smooth and to match with existing as required complete all as specfied and as directed. |
| 79 | S&F in repair down rod heavy duty with 20mm dia MS rod for hanging ceiling fan not exceeding 0.5 mtr and fixing complete including joist of suitable size, nuts, bolts and washer with 2 Nos rubber insulator including drilling holes as required including necessary painting complete all as specfied and as directed. |
| 80 | S&F in repair mild Steel \"S\" shape clamp made out of flat iron of size 25 x 6 mm with nuts and bolts of appropriate size as required for hanging of ceiling fan and necessary painting etc including taking out old/unserviceable one complete all as specfied and as directed. |
| 81 | S&F in repair rubber insulator reel type suitable for fan hook of any type complete all as specfied and as directed. |
| 82 | Taking out unserviceable canopy set and replacing the same with new PVC canopy set one as per existing specification as approved. |
| 83 | S&F for PVC holder for holding capacitor (condenser housing) of any size in ceiling fan complete all as specified and as directed. |
| 84 | S&F in repair plastic body, 150mm sweep Exhaust Fan suitable for 220 V, Strong Air Suction, Rust Proof Body and Dust Protection Shutters,Suitable for Bathroom, Kitchen, and Officecomplete all as specfied and as directed. Make : HAVELLS Cat No. Ventil Air DX or Equivalent model of make in Appx \"A\". |
| 85 | S&F in repair Exhaust Fans AC single phase 230/240 Volt of size 225 to 230 mm sweep light duty model DRIFT AIR PLUS METAL ANTI DUSTcomplete all as specfied and as directed. |
| 86 | S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including 0.5 Sqmm three core PVC insulated flexible copper conductor multistranded wire from fan motor to ceiling and writing MES No. on fan body as required complete all as specified and directed |
| 87 | S&F Power circuit board for BLDC Fan suitable for 26 Watt to 35 Watt of any make / capacity as per model /sample complete all as specified and directed. |
| 88 | S&F capacitor (oil filled) of capacity 2.0/2.5 mfd complete all as specfied and as directed.Make : Havells/Universal /Tibcon/Sarda/Usha. |
| 89 | S&F for modular Bell push 1 way 6 A, 1 Module ISI marked complete all as specified and as directed. |
| 90 | S&F for modular socket 6-A, 2/3 Pin combined 2 module ISI marked complete all as specified and as directed. |
| 91 | S&F for modular switch 1 way 6 A, 1 Module ISI marked complete all as specified and as directed. |
| 92 | S&F for modular switch 1 way 16 A, 1 Module ISI marked complete all as specified and as directed. |
| 93 | S&F modular socket 6 A/16 A, 2/3 Pin combined 2 module in existing location, complete all as specified and as directed. |
| 94 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep for foundation/cable trench, not exceeding 10Sqm on plan and getting out in soft/loose soil complete all as specified and as directed. |
| 95 | Returning filling including spreading, levelling and well ramming in layers not exceeding 25cm thick in soil complete all as specified and as directed. |
| 96 | Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 97 | M&L for sand cushioning with dry clean sand 15cm below cable and 8cm above the cable complete all as specified and as directed. Note : Punned thickness shall be measured for payments. |
| 98 | Taking out/down old/unserviceable under ground LT cables of any size and connections including pipes etc from trenches/walls/poles of any cross sectional area and keeping serviceable materials in safe custody for reuse and unserviceable materials removing from site complete all as specified and as directed.Note : (1) Pipes shall be measured and paid separately under relevant items of this schedule.(2) Excvation and earth work shall be measured and paid seperately. |
| 99 | Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, armoured, 2 core, nominal cross sectional area of main conductor 10 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI Pipe complete all as specified and as directed. |
| 100 | Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, armoured, 4 core, nominal cross sectional area of main conductor 16 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI Pipe complete all as specified and as directed. |
| 101 | S&F in repairs 25 mm dia, rigid non metalic, PVC Conduits complete with all accessories suitable for wiring to street lights complete all as specified and as directed. |
| 102 | S&F for service cable, 1100 volts grade heavy duty cable with PVC insulated, stranded aluminium conductor served with an inner seathing of PVC tape armoured with galvanisedsteel wire or tape and overall PVC sheathed 2 core stranded conductor of 4 Sqmm nominal cross sectional area complete all as specified and as directed. |
| 103 | S&F in repair new LED street light fitting of capacity 90W, Street lights are aerodynamically designed for all weather conditions with excellentthermal management, made up of pressure die cast housing with toughened glass and high power LED\"s with secondary optics and IP66 protection. 10 KV SPD included,Efficacy ≥110/120 LPW, including with necessary brackets /pipes/clamps & nuts& bolts for holding the street light fitting and three core copper cable of 2.5 Sqmm as required in existing location complete all as specified and as directed. |
| 104 | S&F in repair for new LED street light fitting of capacity 70W,Street lights are aerodynamically designed for all weather conditions with excellent thermal management, made up of pressure die cast housing with toughened glass and high power LED\"s with secondary optics and IP66 protection. 10 KV SPD included,Efficacy ≥110/120 LPW, including with necessary brackets /pipes/clamps & nuts& bolts for holding the street light fitting and three core copper cable of 1.5 Sqmm as required in existing location complete all as specified and as directed. . |
| 105 | S&F in repair new LED street light fitting of capacity 60W, Street lights are aerodynamically designed for all weather conditions with excellentthermal management, made up of pressure die cast housing with toughened glass and high power LED\"s with secondary optics and IP66 protection. 10 KV SPD included,Efficacy ≥110/120 LPW, including with necessary brackets /pipes/clamps & nuts& bolts for holding the street light fitting and three core copper cable of 1.5 Sqmm as required in existing location complete all as specified and as directed. |
| 106 | S&F in repairs integral compact wide beam high performance200 W LED flood light luminaire with PLUTO NEO LED floodlight made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection. System efficacy ≥ 110/120LPW 10KV SPDincluding connecting up with 2.5 Sqmm multistranded copper conductor cables of suitable length withfixed to pole/wall, etc and testing complete all as specified and as directed. |
| 107 | S&F in repairs integral compact wide beam high performance 100 W LED flood light luminaire with ROVER PLUS LED floodlight made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection. System efficacy >110/120 LPW 10KV SPD to be ordered separately with built in control gear including connecting up with 2.5 Sqmm multistranded copper conductor cables of suitable length withfixed to pole/wall, etc and testing complete all as specified and directed. |
| 108 | S&F in repairs, LED post top lantern of 40 WattMAPLE Decorative Post top for 360° indirect light with IP 65 protection. Resistant to impact and corrosion. Glare-free and better uniformity including providing and connection with 1.5Sqmm copper conductor, multistranded copper conductor cable of required length complete all as specified andas directed. |
| 109 | S&F in repairs 10W LED Bollard MAYA I Pressure die cast powder coated housing with PC diffuser. Efficient high output LED with IP65 protection complete all as specified and directed . |
| 110 | S&F in repairs street light bracket arm of length not less than 1.5 m made out of GI tubing, 40mm bore, light grade fixed to pole, etc with suitable size flat iron clamp, nuts, bolts including painting with two coats of aluminium paint over a coat of red oxide, zinc chrome primer on steel surfaces complete all as specified and as directed. |
| 111 | S&F for LED post top 20watts cap HERITAGERated LED Post Top ideal to light up parks, gardens and heritage sitewith rated voltage 240 Volts including high voltage and short circuit protection IP 65,with necessary suitable fixing accessories/arrangements complete all as specified and as directed. |
| 112 | S&F for time switches digital type 415 Volt Three phase of 65 Amp rating with contactor fitted inside and MCB TPN 63 A, max load of 6 KW within steel enclosure complete including connecting items complete all as specified and as directed. |
| 113 | S&F Integral LED aviation lights comprising of aluminium housing with polycarbonate enclosure complete all as specified and as directed. |
| 114 | M&L for cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. |
| 115 | M&L for cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in pole coping including necessary form work for fair finish surfaces duly breaking the old damaged and placing a new flush box for termination inside the base complete complete all as specified and as directed. |
| 116 | S&F in repair LED lamp10 Watt B22 Base surge protection 2.5K,CCT 6500K complete all as specified and as directed. |
| 117 | Supply only PVC insulation tape of pack of 30 rolls multi colour and black of standardsize and thickness 2 to 3mm complete all as specified and as directed. |
| 118 | S&F for LED drivers suitable for any make and type of LED street light fittings of capacity 20 to 45 watt including taking down old unserviceable driver complete all as specified and as directed. |
| 119 | S&F for LED drivers suitable for any make and type of LED street light fittings of capacity 60 to 120 watt including taking down old unserviceable driver complete all as specified and as directed. |
| 120 | S&F for LED drivers suitable for any make and type of LED Flood light fittings of capacity 50 to 150 watt including taking down old unserviceable driver complete all as specified and as directed. |
| 121 | S&F for LED drivers suitable for any make and type of LED Flood light fittings of capacity 200 to 350 watt including taking down old unserviceable driver complete all as specified and as directed. |
| 122 | M&L for scrapping the existing surfaces of the street light poles of height 7.5 metres (painting length) with emery paper, removing the dust and rustproperly and applying 2 coats of aluminum paint over complete pole and stickering the pole with glow sign round the electrical pole at three places of 10cm width andnumbering with paint not less than 4 letters with glow sign material at the bottom of pole and nomenclature shall be given by Engineer-in-Charge complete all as specified and as directed. |
| 123 | M&L for drawing a circle and writing the number in side the circle on Electric pole not less than 4 letters and nomenclature and colour of the sticker to be stickered on pole shall be given by Engineer-in-Charge complete all as specified and as directed. |
| 124 | S&F in repairs 40 mm bore, steel tubes, galvanised, light grade with all fittings and fixtures complete fixed to walls, ceilings, poleusing suitable clamp/holder bat complete all as specified and as directed. |
| 125 | Taking down the service connections of the light fittings from connector/ ceiling roses/ overhead bare conductor etc of the street/ security lights , fromheight of approx7mtr above groundby any means on PCC/Metal poles with all safety measures to remove the carbon deposits/ disconnected due to wind/wear & tear complete and connecting /fixing back the connections /fittings at existing place complete all as specified and as directed |
| 126 | Dismantling of unserviceable broken LT pole steel/RCC any size including demolition of foundation as required and making good distrub surface and keeping serviceable pole for re-use in any location complete all as specified and as directed.Note : Earth work wherever involved shall be measured and paid separately. |
| 127 | M & L for steel tubular swaged pole 410 SP-22 (9 metre long) including CI base plate, finial taper plug, bolts, nuts & screws as per IS 2713 Part -I & II including painting with two coats of aluminium paint over a coat of red oxide zinc chrome primer on exposed portion and making strips of width 30 cm upto 1.5 m from the ground level in black and yellow shade in alternate layer including numbering of poles using two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer and two coats of anticorrosive paint over a coat of red oxide primer to embedded portion of pole including making good to match existing area complete all as specified and as directed. |
| 128 | M & L Earthing complete with GI earth plate electrode 600 mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts,check nuts and washers protected by 15mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, pre-cast RCC 1:2:4 type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT steelbars @15cm centre to centre in both direction and 10mm dia MS handle of suitable size, charcoal or coke and salt in alternative layers,necessary earth work in soft/loose soil all as shown in Electrical Plate No 3 of MES Schedule Part I and testing complete inclduing taking down old one/ dismantling complete all as specified and as directed. |
| 129 | Taking down carefully 15 meter long mast light, removing all the serviceable fittings (6/9 Nos) of 250/400 Watt for refixing after replacement of worn and unserviceable rope, chain, gear, jubli clamp etc after servicing re-installation of the complete High Mast, complete all as specified and as directed.Note: Spare parts shall be measured and paid separately. |
| 130 | S&F in repairs LED tube light batten (1.2M) made of extruded aluminum housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 18/20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed. |
| 131 | S&F in repair LED tube light Inverter type with minium 4 hrs backup, batten (1.2M) made of extruded aluminum housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 18/20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete all as specified and directed. |
| 132 | S&F in repair 10W,LED, Energy saving new generation bulk head luminaire with opal diffuser having lumen output of 1100 lumens at a minimum system efficiency of 110 lumen per watt and total power consumption not more than 10 watt including driver and having IP66 protection. It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K including lamp including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. |
| 133 | S&F in repair LED 36 watt Recess mounted deep drawn2X2 feet CRCA housing having a nominal system lumen output of 3600 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 36 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a colour temperature of 6500K with higher power LED Seamless front frame with flat white hight transmission acrylic cover with built in PIR occupancy sensor offering flexibility of auto switching off when the space is not occupied all as specified and directed. |
| 134 | S&F in repair LED 15W Recess mounted pressure die-cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation with separate replaceable electronic driver included cutting-opening of celing any type & fixing arrangement for fitting complete all as specified and directed. |
| 135 | S&F in repair casing caping of suitable size as required at site complete all as specified and directed. |
| 136 | S&F repair PIR motion sensor 220V, having range min 7 meter having 3 adjustable knobs (off time, Light sensitivity, Motion sensitivity) complete all as specified and directed. |
| 137 | S&F in repair flexible LED tricolour strip light length 18 mtrs IP65 complete all as specified and directed. |
| 138 | S&F in repair quartz timer switch as per existing specifiction on timer Panel complete all as specified and directed. |
| 139 | S&F in repair contactor 63A, 3 pole and neutral complete all as specified and directed. |
