Tender For Special Repair To Bldg No T 74A Of 7 Garh Rif Bldg No P 15 At Sukhi Sewania Firing Range Addn Altn To Cook House Bldgs At Inf Bn And Provn Of Upgradation Of Internal Electrification Of Bldg No P 309 Of Scc Bhopal At Si Lines Under Ge Bhopa
Tender Value
39.45 Lakhs
Estimated cost
Bid Submission
08 Apr 2025
0 days left
EMD
78900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair To Bldg No T 74A Of 7 Garh Rif Bldg No P 15 At Sukhi Sewania Firing Range Addn Altn To Cook House Bldgs At Inf Bn And Provn Of Upgradation Of Internal Electrification Of Bldg No P 309 Of Scc Bhopal At Si Lines Under Ge Bhopal
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-Apr-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-Apr-2025 |
BOQ
| Sl. No. | Item Description |
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | Dismantling AC (Corrugated, semi corrugated, etc) sheets in roof coverings complete all as specified and directed. |
| 3 | S&F of pre-painted galvalume aluminium zinc coating AZ-150, GI based corrugated steel sheet 0.50mm thick of any colour having tenstile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | S&F of pre-painted galvalume aluminium zinc coating AZ-150, GI based Plain steel sheet 0.50mm thick of any colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 5 | Taking down chowkats or framesexc 1.5sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) complete all as specified and directed. |
| 6 | All as per ser item No. 4.00 here-in-before but n.exc 1.5 Sqm |
| 7 | S&F of pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 8 | S&F of pressed steel frames of size 125 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 9 | S&F of factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and directed. |
| 10 | S&F of single extruded WPC (Wood Polymer Composite) factory made glazed and skeleton shutters of 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed. |
| 11 | S&F of 150 mm long, extrudedaluminium alloy handles fabricated type anodized and fixed complete all as specified and directed. |
| 12 | S&F of mild steel work, Grade Fe-290, Gde-E-165, as in flat iron (for hold fast) and similar work complete all as specified and directed. |
| 13 | M&L for 100 mm long, stainless steel, butt hinges medium grade and fixed complete all as specified and directed. |
| 14 | S&F of 200mm long aluminium anodized, barrel tower bolts of extruded sections complete all as specified and directed. |
| 15 | S&F of 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 16 | M&L for PCC 1:3:6, type C1 (using 20 mm graded stone aggregate) as in coping or filling for hold fast and similar work complete all as specified and directed. |
| 17 | Dismantling of stone slabs and tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed. |
| 18 | Demolition of unreinforced cement concrete in ground floor and paving not exceeding 15cm thickbelow or above ground level complete all as specified and directed. . |
| 19 | M&L for 75 mm thick PCC 1:4:8 type D2, using (40 mm graded stone aggregate) as in sub base of flooring complete all as specified and directed. |
| 20 | M&L for Granite stone tile of 16-18 mm thick on vertical surfaces such as skirting, dado, steps, wash basin table top, flooring, kitchen slab, machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including over 15mm thick screed bedding layer in CM (1:6) complete all as specified and directed. |
| 21 | M&L for machine cut kota stone slab flooring 18-20 mm thick laid over including over 15mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing complete all as specified and directed. |
| 22 | M&L for PCC 1:2:4 type B1 using (20 mm graded stone aggregate) as in kerbs all around tile and similar work complete all as specified and directed. |
| 23 | S&F forfactory made UPVC white colour fixed window made of extruded profiles with wall thickness of 2.3mm(+/-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 (+/- 0.2mm) thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass complete all as specified and directed.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories and net opening will be measured for payment purpose. |
| 24 | Hacking out old broken glass (any thickness, size, quality or description) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 25 | M&L for 4 mm thick, plain sheet glass, ordinary quality in any size, n.exc 0.50 each pane fixed with rubber beading or oil putty for windows/doors/partition etc complete all as specified and directed. |
| 26 | S&F in repairs double action, floor spring hydraulically regulated made up of minimum 1.25mm thick lathe, aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other plart made of mild steel heavy duty and fixed complete all as specified and directed. |
| 27 | S&F in repairs for aluminium (extruded section) body hydraulically door closer regurated, designation No. 3 universal type, suitable for door shuttes of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed. |
| 28 | S&F of aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples as fixed in repairs complete all as specified and directed. |
| 29 | Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed.Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement. |
| 30 | S&F of exposed metal frame ceiling with calcium silicate board 6mm thick of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid complete all as specified and directed.Note:- Frame work for ceiling shall be measured and paid separately. |
| 31 | S&F of anodised aluminium snap grid powder coated of size 600mm x 600mm frame work for false ceiling complete all as specified and directed. |
| 32 | S&F of hangers 6 mm dia GI (upto 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed. |
| 33 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 34 | S&F of steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 Grade St-240 complete all as specified and directed. |
| 35 | S&F of mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting platesof grade Fe 410-W ( Gde E-250 ) quality A complete all as specified and directed. |
| 36 | M&L for preparation of newly steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 37 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing coat), removing rubbish off the premises complete all as specified and directed. |
| 38 | M&L for joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including over 15mm thick screed bed in CM (1:6) etc complete all as specified and directed. |
| 39 | M&L for glazed coloured ceramic tiles in vertical surface for 450x300x7mm thick as in skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match and including over 10mm thick backing coat in CM 1:4etc complete all as specified and directed. |
| 40 | Taking down cement plaster on brick walls or stone walls etc includingraking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m complete all as specified and directed. |
| 41 | M&L for rendering 10 mm thick on fair faces of brick/concrete surfaces cement plaster in CM (1:4), finished even and smooth without using extra cement complete all as specfified and directed. |
| 42 | M&L for preparation of new or previously untreated plastered surfaces of walls & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 43 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 44 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 45 | M&L for preparation of old plastered surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new surfaces complete all as specified and directed. |
| 46 | M&L for preparation of old plastered surfaces of walls and applyingtwo coats of distemper oil emulsion of any colour or tint over a coat of priming plastered and other surfaces with alkali-resistant priming paint complete all as specified and directed.Note:- Quoted rate shall be include any height of Bldgs / Hangars for scafolding as all arrangement. |
| 47 | M&L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 48 | Dismantling of structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed. |
| 49 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 50 | Taking up or down 15mm bore steel tubing and connections complete all as specified and directed. |
| 51 | M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed. |
| 52 | S&F of tubes 15mm dia, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 53 | M&L for 25 mm thick PCC type B-1 1:2:4 (using 20mm graded stone aggregate) as in sub base of floor complete all as specified and directed. |
| 54 | M&L for mild steel, TMT bars 10 mm dia and over, cut to length and bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less 0.9 mm dia complete all as specified and directed. |
| 55 | M&L for reinforced cement concrete 1:1.5:3 (Nominal mix) type B1 (using 20 mm graded stone aggregate)for slabs supported on walls, beams and columns in floors, roof, landings, balcoonies, canopies, deck slabs and in slelves and the like complete all as specified and directed. |
| 56 | M&L for 15mm thick rendering in CM 1:6 on fair face of brick walls/concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 57 | M&L for 15 mm thick rendering in CM 1:4 on fair faces of bricks walls surface finished even and smooth without using extra cement using water proofing compound as per manufacturer instructions complete all as specified and directed. Note- Water proofing compound shall be measured and paid seperately. |
| 58 | M&L for 10 mm thick rendering in CM 1:3 on fair face of brick/concrete surfaces as in ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 59 | M&L for preparation and chalk whitening of newly plastered surface of wall/ceiling and applying two coats of distemper oil emulsion over a coat of wall primer complete all as specified and directed. |
| 60 | M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint on wall surfaces complete all as specified and directed. |
| 61 | M&L for preparation of old plastered surfaces and applying two coats of cement base painton wall surfaces complete all as specified and directed. |
| 62 | Supply only integral water proofing compound complete all as specified and directed. |
| 63 | M&L for cutting holes in brick walls, exc half brick but not exc one brick in cement mortar or cement lime mortor for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 (using 20mm graded stone aggregate) as required complete all as specified and directed. |
| 64 | M&L for PCC 1:3:6 type C-2, 75 mm thick using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed. |
| 65 | M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in sub base, foundation filling in mass concrete etc complete all as specified and directed. |
| 66 | Use & waste for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200 mm thick (Horizontal or sloping) flat finished surface complete all as specified and directed. |
| 67 | Use & waste for formwork to sides and soffits of floor or roof beam, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports overhangs etc. also splays between floors and beams, etc for flat finished surfaces complete all as specified and directed. |
| 68 | Use & waste for formwork to sides of pillars, posts, struts, piers, columns and stanchions, etc for flat finished surfaces complete all as specified and directed. |
| 69 | S&F of mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290, Gde-E-165, complete all as specified and directed. |
| 70 | M&L for preparation of old painted surfaces of steel and iron surface of any description and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 71 | M&L for cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) as in coping, benching etc for drain and similar works complete all as specified and directed. |
| 72 | M&L for stone walling of random rubble, brought upto courses, well bonded, bedded and solidly hearted, built in CM (1:4) complete all as specified and directed. |
| 73 | M&L for mild steel, 1.60 mm thick plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 74 | S&F in repairs vitreous china squatting pan of Orissa pattern 580x440 mm white with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 75 | S&F in replacement 250 ltrs capacity rotational moulded polyethylene water storage tanks 3 layers (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. |
| 76 | S&F in repairs PVC low level flushing cistern of 10 Litres with all internal fittings including flush pipe and fixing to supply pipe complete all as specified and directed. |
| 77 | S&F of PVC connection 15mm size with PTMT nuts of length 450 mm and fixed complete all as specified and directed. |
| 78 | S&F in repairs 15 mm stop cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, high pressure, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 79 | S&F in repairs 15 mm, bib taps, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, high pressure, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 80 | M&L for 75mm bore PVC (SWR) floor trap plain with grating incl jointing with solvent cement complete all as specified and direcetd. |
| 81 | S&F of PVC(SWR) pipes 110 mm bore, single socketed in any length with rubber rings joints laid in trenches complete all as specified and directed. |
| 82 | M&L for forming embankments including raising (or lowering) earth, spreading in layers n exc 30 cm thick; watering, ramming/rolling and finishing to required size, shape etc n exc 1.5 m high from base, complete all as specified and directed. |
| 83 | M&L for post Anti Termite tretment for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed. |
| 84 | M&L for post Anti Termite tretment for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. |
| 85 | M&L for post Anti Termite tretment for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed. |
| 86 | S&F of 110mm bore PVC(SWR) bend and fixed with solvent cement complete all as specified and directed. |
| 87 | M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in foot parth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 88 | Taking up or down steel tubing and connections 20 mm bore complete all as specified and directed. |
| 89 | M&L for 20 mm dia steel tube, medium grade, galvanised with all fitting and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed. |
| 90 | S&F in repairs 18mm thick plywood grade BWR, type BB fixed with screws to timber frame work complete all as specified and directed. |
| 91 | S&F in reapirs 0.9mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker\"sinstructions complete all as specified and directed. |
| 92 | S&F in repairs to cabinet hinges soft close SS 8 crank and fixed with ss screws complete all as specified and directed. |
| 93 | Taking down carefully copper/aluminium point wiring concealed/casing caping (light, fan, socket or power) including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, call bell and removing materials to store complete all as specified and directed. |
| 94 | Dismantling/taking down of unserviceableold existing service /submain wire of any size complete all as specified and directed. |
| 95 | Dismantling/taking down of unserviceabledistribution boards with MCBs complete all as specified and directed. |
| 96 | M&L for concealed point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and includidng single core PVC insulated unsheathed flexible conductor FRLScables 1.5 sqmm as per IS 694:2010 ISI marked annealed multistranded copper conductor drawn through and including medium grade PVC conduit as per IS 9537 (Part-III) 1983 of suitable nominal size as required at site but not less than 20mm noninal size including modular metal flush box / junctiion boxes etc ISI marked and 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistaranded copper conductor FRLS cable as continious earth wire connected to metalic body at one end and common earth dolly to other end including cost ofcutting chase and making good to distrubed surfaces of wall with cement mortor 1: 3 including necessary plaster and poiinting in cement mortor 1:3 with white wash / distemper/ other painting complete all as specifiecd and as directed Note:- Cost of cutting chase and making good shall be included in the quated rates. |
| 97 | All as per item No 95.00 here-in-before but one socket outlet 5 pin 5/6 Amps on independent board controlled by one, one way switch. |
| 98 | All as per item No 95.00 here-in-before but one socket outlet 5 pin 5/6 Amps on same board with other one, one way switch. |
| 99 | All as per item No 95.00 here-in-before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 2.5 Sqmm and 2.5 Sqmm as earth wire. |
| 100 | All as per item No 95.00 here-in-before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 4 Sqmm and 4 Sqmm as earth wire |
| 101 | S&F of modular switch one way 6 Amp one module, 240 volts complete all as specified and directed. |
| 102 | S&F of modular switch one way 16 Amp one module, 240 volts complete all as specified and directed. |
| 103 | S&F of modular socket outlet 2-in-1, 2/3 pin, 6/16 Amps, 240 volts, controlled by one switch complete all as specified and directed. |
| 104 | S&F of modular socket outlet 2-in-1, 2/3 pin, 6 Amps, 240 volts, controlled by one switch complete all as specified and directed. |
| 105 | S&F of modular metal flush box of 6 module complete all as specified and directed. |
| 106 | S&F of modular metal flush box of 4 module complete all as specified and directed. |
| 107 | S&F of modular metal flush box of 3 module complete all as specified and directed. |
| 108 | S&F of modular white cover plate with frame of 6 module complete all as specified and directed. |
| 109 | S&F of modular white cover plate with frame of 4 module complete all as specified and directed. |
| 110 | S&F of modular white cover plate with frame of 3 module complete all as specified and directed. |
| 111 | S&F in repairs ceiling rose 3 terminals 65mm x 25mm size polycarbonate isolated complete all as specified and directed. |
| 112 | S&F in repairs lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 113 | S&F of modular fan regulator complete all as specified and directed. |
| 114 | Taking down and refixing of LED tube light fitting of any type any capacity in the existing wall and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector complete all as specified and directed. |
| 115 | Taking down and refixing of ceiling fan of any type any size in the existing position and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector or depositing to E/M Store at SI Line complete all as specified and directed. |
| 116 | S&F in repairs LED tube light fitting bright 40 watt slim elegant design with and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector complete all as specified and directed. |
| 117 | S&F in replacement building security light fitting made up of pressure die cast alluminium housing with high efficient 30 Watt LED as lighting source and pc over having top opening separate driver compartment with IP-66 Protection and including IK 07 protection suitable galvanized iron pipe \"light grade\" brackets 1.2 mtr length bent to shape to obtain required shape including clamps ,nuts/bolts/washers etc connecting withwith PVC insulated multistranded copper flexible cable 1.5 sqmm three core copper wire complete all as specified and directed. |
| 118 | S&F in repairs sheet metal enclosure, double door type surface mounted concealed in wall12 ways, 240 Volts, ISI marked IP 43 protection 200 amps bus bar dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed. Note:- MCB shall be measured and paid separately. |
| 119 | S&F in repairs MCB 6-32 amps, 10 KA, SP 240 volt, \"C\" series complete all as specified and directed. |
| 120 | S&F in repairs MCB SPN suitable for 240 volts, \"B\" curve,AC supply63 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed. |
| 121 | S&F in repairs earthing complete with galvanised steel earth plate electrode size 600X600X6mm thickburried directly in ground vertically to a depth not less than 2.25m deep below normal ground level with top edge of earth plate not less than 1.5m deep below normal ground level and connected to and including GI earth lead wire4mm diaby means of bolts, nuts, check nuts & washers ofgalvanised iron and connected to test point all asshown in electrical plate No 3 of SSR part I-2009 and all as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC (1:3:6) type C-1 earthing chamber, pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm gradedcrushed stone aggregatereinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GIprotection pipe of 15 mm bore light grade up to 7.5 metre long complete all as specified and directed.Note :- GI earth wire and protection pipe beyond 7.5 metre will be measured and paid separately. |
| 122 | S&F of exhaust fan, steel body AC single Phase 230V of size 380 mm sweep with, blades, and frame and louvers including cutting of hole in existing wall and resurfacing of disturbed area of wall complete all as specified and directed. |
| 123 | S&F of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC) without remote controller complete all as specified and directed. |
| 124 | S&F of vertical type electric water heater of capacity 50 litre storage type superior glassline coating, smart shield corrossion protection, hi precision thermal stem cut out with copper inner tank and powerful heating element upto 2 KW capacity incl temperature control knob, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc. complete all as specified and directed. |
| 125 | S&F in repairs sheet metal enclosures IP-43 protection with socket plug top and MCB\"s with two pin and earth plug and socket complete with one Single pole MCB 240 V grade 25/20 Amp complete all as specified and directed. |
| 126 | M&L for concealed point wiring for one light or one fan or one exhaust fan controlled by two 2 way switch complete with and includidng single core PVC insulated unsheathed flexible conductor FR-LScables 1.5 sqmm as per IS 694:2010 ISI marked annealed multistranded copper conductor drawn through and including medium machenical strees PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20mm noninal size including modular / non modular type all accessories/fitting / metal flush box / cover plate/junctiion boxes/ inspection cover etc ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistaranded copper conductor FR-LS cable as continious earth wire connected to metalic body at one end and common earth dolly to other end including cost ofcutting chase and making good to distrubed surfaces of wall with cement mortor 1: 3 including necessary plaster and poiinting in cement mortor 1:3 with white wash / distemper/ other painting complete all as specifiecd and directed.Note:- Cost of cutting chase and making good shall be included in the quated rates. |
| 127 | S&F ofmodular switch two way 6 Amp one module, 240 volts complete all as specified and directed. |
| 128 | S&F of sheet metal enclosures, IP-43 protection with socket plug top and MCB\"s with two pin and earth plug and socket complete with one Single pole MCB 240 V grade 25/20 Amp complete all as specified and directed. |
| 129 | S&F 10 watt LED bulb cool day light, 230/240V,AC all as specified and directed. |
| 130 | S&F of LED tube light fitting bright 20 watt slim elegant design and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector complete all as specified and directed. |
| 131 | S&F of modular bell push 6 Amp one module, 240 volts complete all as specified and directed. |
| 132 | S&F of call bell ding dong 230V, AC, single phaseISI marked complete all as specified and directed. |
| 133 | S&F in replacement building security light fitting made up of pressure die cast alluminium housing with high efficient 30 Watt LED as lighting source and pc over having top opening separate driver compartment with IP-66 Protection and including IK 07 protection suitable galvanized iron pipe \"light grade\" brackets 1 mtr length bent to shape to obtain required shape including clamps ,nuts/bolts/washers etc connecting withwith PVC insulated multistranded copper flexible cable 1.5 sqmm three core copper wire complete all as specified and directed. |
| 134 | Taking down and refixing of LED tube light fitting bright20 Watt. slim elegant design. and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector complete all as specified and directed. |
| 135 | S&F in replacement of MCB DB, TPN 4 way (IP-43 protection) vertical/horizontal typewith single/three phase outgoing with provision for MCBs/MCCB as incomer 415 volt with 200 amps rated bus bar complete all as specified and directed. |
| 136 | S&F of factory made epoxy powder coated distribution board TP & N 4 ways (VTPN MCCB DB) and space for MCCB as incomer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including isolated Neutral Bar, Insulated busbar assembly, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts complete all as specified and directed.NOTE:- MCCB shall be measured and paid seperatly. |
| 137 | S&F of MCCB 125 Amp, 3 Pole, breaking capacity 36 KA with complete electricalconnections by appropriate size of copper lugs complete all as specified and directed. |
| 138 | S&F in replcement MCB 40 amps, 10 KA,SP 240 volt, \"C\" series complete all as specified and directed. |
| 139 | S&F in replcement MCB 32-40 amps, 10 KA, DP 240 volt, \"C\" series complete all as specified and directed. |
| 140 | All as per item No 138.00 here-in-before but MCB DP 63 amps. |
| 141 | All as per item No 138.00 here-in-before but MCB TP 100 amps. |
| 142 | All as per item No 138.00 here-in-before but MCB TPN 100 amps. |
| 143 | S&F of LED Tube light fitting two feet 10 watt, slimdesign, 230 volts,including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector complete all as specified and directed. |
| 144 | Taking down/dismantling ofstorage type hot water Geyser of 50/35/25 litre capacity from different locations by disconnecting inlet/outlet connections and refixingin it positionin serviceable condition, by connecting inlet & outlet and testing complete all as specified and directed. |
| 145 | Taking down carefully serviceable/unserviceable exhaust fans of any type/size from its position, and refixing on its positionin serviceable condition by petty repairing properly complete all as specified and directed. |
| 146 | Taking down carefully ceiling fans of any size from its position, and refixing on its position in serviceable condition by petty repairing, cleaning,greasing ,painting as existin colour properly complete all as specified and directed. |
| 147 | Taking down carefully 1.5/2 TR ACs any typeof any size from its position with all precaution, and refixing on its original position in fully serviceable condition by gas charging & petty repairing properly up to fully satisfaction of Engr in Charge complete all as specified and directed. |
| 148 | S&F in repairs for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with three single core PVC insulatedISI marked FRLS cable 1100V unsheathed with stranded copper conductor of 1.5 sqmm nominal cross section areaand drawing into20mm external diameter rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. in concealed wiring system by cutting of walls (brick or stone) and making good disturbed surface of wall in CM 1:3 and PVC insulated stranded copper conductor of 1.5 sqmm nominal cross section area as earth wire complete all as specified and directed. Note : (i)Wiring to be done as per approved colour code in IE rule. (ii) Two runs of 1.5 sqmm cable, one run of 1.5 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length. |
| 149 | M&L in repair for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with three single core PVC insulatedISI marked FRLS cable 1100V unsheathed with stranded copper conductor of 2.5 sqmm nominal cross section areaand drawing into20mm external diameter rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. in concealed wiring system by cutting of walls (brick or stone) and making good disturbed surface of wall in CM 1:3 and PVC insulated stranded copper conductor of 2.5 sqmm nominal cross section area as earth wire complete all as specified and directed. Note : (i)Wiring to be done as per approved colour code in IE rule. (ii) Two runs of 2.5 sqmm cable, one run of 2.5 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length. |
| 150 | M&L in repair for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with three single core PVC insulatedISI marked FRLS cable 1100V unsheathed with stranded copper conductor of 4.0 sqmm nominal cross section areaand drawing into20mm external diameter rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. in concealed wiring system by cutting of walls (brick or stone) and making good disturbed surface of wall in CM 1:3 and PVC insulated stranded copper conductor of 4.0 sqmm nominal cross section area as earth wire complete all as specified and directed. Note : (i)Wiring to be done as per approved colour code in IE rule. (ii) Two runs of 4.0 sqmm cable, one run of 4.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length. |
| 151 | S&F in repairs sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with three single core PVC insulatedISI marked FRLS cable 1100V unsheathed with stranded copper conductor of 6.0 sqmm nominal cross section areaand drawing into20mm external diameter rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. in concealed wiring system by cutting of walls (brick or stone) and making good disturbed surface of wall in CM 1:3 and PVC insulated stranded copper conductor of 6.0 sqmm nominal cross section area as earth wire complete all as specified and directed. Note : (i)Wiring to be done as per approved colour code in IE rule. (ii) Two runs of 6.0 sqmm cable, one run of 6.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length. |
| 152 | M&L in repair for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with three single core PVC insulatedISI marked FRLS cable 1100V unsheathed with stranded copper conductor of 10.0 sqmm nominal cross section areaand drawing into20mm external diameter rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. in concealed wiring system by cutting of walls (brick or stone) and making good disturbed surface of wall in CM 1:3 and PVC insulated stranded copper conductor of 10.0 sqmm nominal cross section area as earth wire complete all as specified and directed. Note : (i)Wiring to be done as per approved colour code in IE rule. (ii) Two runs of 10.0 sqmm cable, one run of 10.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length. |
| 153 | Deduct amount of Rs. 52,713.00 for Schedule of credit (calculation will be done off line) |
AI Tender Summary
Tender Timeline
Apr 01, 2025
11:30 IST
Tender Published
Tender notice published.
Completed
Apr 08, 2025
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedApr 08, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedApr 10, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender